Description Ordering
A2110 Audio Level Controller Mono 100W/8 Ohm

Audio Level Controller Mono 100W/8 Ohm

A2110

Mono Audio fader, suitable for remote speaker volume controls. Can also be mounted into speaker boxes or wall plates. 100W rating, suitable for 8&Omega systems.
C0170 10mm 55dB Omni-Directional Electret Mic Insert

10mm 55dB Omni-Directional Electret Mic In...

C0170 ROHS

Polar Pattern: Omni-directional Current Drain: 0.8mA max. Impedance: 1k Ohm, ±30% Sensitivity: -55dBm ±3dB Frequency Response: 20Hz-10kHz Dimensions: 10 dia. X 10mm
C0171 10mm 61dB Omni-Directional Electret Mic Insert

10mm 61dB Omni-Directional Electret Mic In...

C0171 ROHS

Polar Pattern: Omni-directional Current Drain: 0.8mA max. Impedance: 1k Ohm, ±30% Sensitivity: -61dBm ±3dB Frequency Response: 20Hz-10kHz Dimensions: 10Ø x 10mm
C0173 10mm 60dB Omni-Directional Electret Mic Insert with Fly Lead

10mm 60dB Omni-Directional Electret Mic In...

C0173 ROHS

Electret mic insert for replacing broken units or building into audio equipment.
C0175 Holder For 10mm Electret Microphone Inserts

Holder For 10mm Electret Microphone Inserts

C0175 ROHS

Rubber boot Suits C 0170 and C 0171
j0900 12V Ultra Mini Pull Type Solenoid

12V Ultra Mini Pull Type Solenoid

J0900

These 12V DC pull type solenoids are suitable for a variety of projects requiring a moving actuator.
j0902 12V Pull Type Solenoid

12V Pull Type Solenoid

J0902

These 12V DC pull type solenoids are suitable for a variety of projects requiring a moving actuator.
L4517A 15.2X8.53X5.94 Toroid Core

15.2X8.53X5.94 Toroid Core

L4517A ROHS

"Powdered Iron" type. For use in power supplies, RF suppression, or chokes.
L4534A 33 X 19.8 X 11.1 Toroid Core

33 X 19.8 X 11.1 Toroid Core

L4534A ROHS

"Powdered Iron" type. For use in power supplies, RF suppression, or chokes.
L4607 10-16 Way Flat Cable Core

10-16 Way Flat Cable Core

L4607 ROHS

Designed for suppression of electromagnetic interference in ribbon cable. A range of beads are available covering a range of ribbon cables.
L4626 20-26 Way Flat Cable Core

20-26 Way Flat Cable Core

L4626 ROHS

Designed for suppression of electromagnetic interference in ribbon cable. A range of beads are available covering a range of ribbon cables.
L4644 6.5mm Clip On Cable Core

6.5mm Clip On Cable Core

L4644 ROHS

Suitable for high frequency ground current suppression in multi core cables. Maximum cable diameter 6.5mm. Fits a majority of Altronics audio/video cables.
L4669 8mm Clip On Cable Core

8mm Clip On Cable Core

L4669 ROHS

Suitable for high frequency ground current suppression in multi core cables. Maximum cable diameter 8mm such as RGB and mains cables.
L4710A 7.9mm Ferrite Suppression Bead

7.9mm Ferrite Suppression Bead

L4710A ROHS

Designed for suppression of electromagnetic interference. A range of sleeves are available, covering a wide frequency band.
L4810A 12.3mm Ferrite Suppression Bead

12.3mm Ferrite Suppression Bead

L4810A ROHS

Designed for suppression of electromagnetic interference. A range of sleeves are available, covering a wide frequency band.
L4820A 14.3mm Ferrite Suppression Bead

14.3mm Ferrite Suppression Bead

L4820A ROHS

Designed for suppression of electromagnetic interference. A range of sleeves are available, covering a wide frequency band.
L4830A 28.5mm Ferrite Suppression Bead

28.5mm Ferrite Suppression Bead

L4830A ROHS

Designed for suppression of electromagnetic interference. A range of sleeves are available, covering a wide frequency band.
L4910A 7.9mm Ferrite Suppression Bead

7.9mm Ferrite Suppression Bead

L4910A ROHS

Designed for suppression of electromagnetic interference. A range of sleeves are available, covering a wide frequency band.
L5230 Large 40-220MHz Core Balun

Large 40-220MHz Core Balun

L5230

Neosid Part No.: 1050-1-F14 Operating Freq.: 40-220MHz Material: F14 Ferrite Dimensions (mm): 7.4x13.2x13.5
L5235 Small 40-220MHz Core Balun

Small 40-220MHz Core Balun

L5235

Neosid Part No.: 1050-2-F14 Operating Freq.: 40-220MHz Material: F14 Ferrite Dimensions (mm): 7.4x13.2x6.6
L5235A Small 40-220MHz Core Balun

Small 40-220MHz Core Balun

L5235A

Neosid Part No.: 1050-2-F14 Operating Freq.: 40-220MHz Material: F14 Ferrite Dimensions (mm): 7.4x13.2x6.6
L5240 Ferrite Aerial Rod 9.5x200mm

Ferrite Aerial Rod 9.5x200mm

L5240

Neosid Part No: 37-256-31 Material: F14 Ferrite Wavelength: up to 12MHz Part No.: 9.5 x 200-F14 Dimensions: 9.5mm Ø x 200mm
L5250A 4mm Ferrite Suppression Bead

4mm Ferrite Suppression Bead

L5250A ROHS

Designed for suppression of electromagnetic interference. A range of sleeves are available, covering a wide frequency band.
L5300 Pot Core Transformer Pair

Pot Core Transformer Pair

L5300

This transformer core has a low loss and is a high saturation grade, making it perfect for transformers and for use in switchmode power supply applications
L5305 Bobbin To Suit L5300

Bobbin To Suit L5300

L5305

Suits L5300.
L6217 47uH 0.5A High Frequency Inductor / Choke

47uH 0.5A High Frequency Inductor / Choke

L6217 ROHS

L: 47.0uH Q: 30Min Test Freq: @2.52MHz DCR: 0.101Ohm Max R.Current: 1.77A Max Turns: 38.5T Ref Operating Temperature: -20°C to +80°C Tolerance: ±10%
L6222 100uH 1.13A High Frequency Inductor / Choke

100uH 1.13A High Frequency Inductor / Choke

L6222 ROHS

L: 100uH Q: 20Min Test Frequency: @796kHz DCR: 0.22Ohm Max R.Current: 1.13A Max Turns: 58.5T Ref Operating Temperature: -20°C to +80°C Tolerance: ±10%
L6225 220uH 0.5A High Frequency Inductor / Choke

220uH 0.5A High Frequency Inductor / Choke

L6225 ROHS

L: 220uH Q: 20Min Test Frequency: @796kHz DCR: 0.509Ohm Max R.Current: 0.73A Max Turns: 82.5T Ref Operating Temperature: -20°C to +80°C Tolerance: ±10%
L6227 330uH 0.5A High Frequency Inductor / Choke

330uH 0.5A High Frequency Inductor / Choke

L6227 ROHS

A: 12mm B: 3mm C: 5mm D: 10mm E: 0.7mm
L6230 470uH 0.5A High Frequency Inductor / Choke

470uH 0.5A High Frequency Inductor / Choke

L6230 ROHS

L: 470.0uH Q: 20Min Test Freq: @796MHz DCR: 0.855hm Max R.Current: 520mA Max Turns: 118.5T Ref Operating Temperature: -20°C to +80°C Tolerance: ±10%
L6517 47uh 3A High Frequency Inductor / Choke

47uh 3A High Frequency Inductor / Choke

L6517 ROHS

These high frequency chokes are suitable for use in switchmode power supplies, SCR and Triac controlled circuits and for EMI suppression. Rated frequency 50Hz to 100kHz
L6522 100uh 3A High Frequency Inductor / Choke

100uh 3A High Frequency Inductor / Choke

L6522 ROHS

These high frequency chokes are suitable for use in switchmode power supplies, SCR and Triac controlled circuits and for EMI suppression. Rated frequency 50Hz to 100kHz
L6523 150uh 3A High Frequency Inductor / Choke

150uh 3A High Frequency Inductor / Choke

L6523 ROHS

These high frequency chokes are suitable for use in switchmode power supplies, SCR and Triac controlled circuits and for EMI suppression. Rated frequency 50Hz to 100kHz
L6525A 220uh 3A High Frequency Inductor / Choke

220uh 3A High Frequency Inductor / Choke

L6525A ROHS

Machine wound. These high frequency chokes are suitable for use in switchmode power supplies, SCR and Triac controlled circuits and for EMI suppression. Rated frequency 50Hz to 100kHz
L6527 330uh 3A High Frequency Inductor / Choke

330uh 3A High Frequency Inductor / Choke

L6527 ROHS

These high frequency chokes are suitable for use in switchmode power supplies, SCR and Triac controlled circuits and for EMI suppression. Rated frequency 50Hz to 100kHz
L6530 470uh 3A High Frequency Inductor / Choke

470uh 3A High Frequency Inductor / Choke

L6530 ROHS

These high frequency chokes are suitable for use in switchmode power supplies, SCR and Triac controlled circuits and for EMI suppression. Rated frequency 50Hz to 100kHz
L6617 47uh 5A High Frequency Inductor / Choke

47uh 5A High Frequency Inductor / Choke

L6617 ROHS

These high frequency chokes are suitable for use in switchmode power supplies, SCR and Triac controlled circuits and for EMI suppression. Rated frequency 50Hz to 100kHz
L6622 100uh 5A High Frequency Inductor / Choke

100uh 5A High Frequency Inductor / Choke

L6622 ROHS

These high frequency chokes are suitable for use in switchmode power supplies, SCR and Triac controlled circuits and for EMI suppression. Rated frequency 50Hz to 100kHz
L6623 150uh 5A High Frequency Inductor / Choke

150uh 5A High Frequency Inductor / Choke

L6623 ROHS

These high frequency chokes are suitable for use in switchmode power supplies, SCR and Triac controlled circuits and for EMI suppression. Rated frequency 50Hz to 100kHz
L6625 220uh 5A High Frequency Inductor / Choke

220uh 5A High Frequency Inductor / Choke

L6625 ROHS

These high frequency chokes are suitable for use in switchmode power supplies, SCR and Triac controlled circuits and for EMI suppression. Rated frequency 50Hz to 100kHz
L6627 330uh 5A High Frequency Inductor / Choke

330uh 5A High Frequency Inductor / Choke

L6627 ROHS

These high frequency chokes are suitable for use in switchmode power supplies, SCR and Triac controlled circuits and for EMI suppression. Rated frequency 50Hz to 100kHz
L6630 470uh 5A High Frequency Inductor / Choke

470uh 5A High Frequency Inductor / Choke

L6630 ROHS

These high frequency chokes are suitable for use in switchmode power supplies, SCR and Triac controlled circuits and for EMI suppression. Rated frequency 50Hz to 100kHz
L7010A 1.0uh RF Inductor / Choke

1.0uh RF Inductor / Choke

L7010A ROHS

Axial construction.
L7012 1.5uh RF Inductor / Choke

1.5uh RF Inductor / Choke

L7012

Axial construction.
L7014 2.2uh RF Inductor / Choke

2.2uh RF Inductor / Choke

L7014

Axial construction.
L7016A 3.3uh RF Inductor / Choke

3.3uh RF Inductor / Choke

L7016A

Axial construction.
L7018 4.7uh RF Inductor / Choke

4.7uh RF Inductor / Choke

L7018

Axial construction.
L7018A 4.7uh RF Inductor / Choke

4.7uh RF Inductor / Choke

L7018A

Axial construction.
L7020 6.8uh RF Inductor / Choke

6.8uh RF Inductor / Choke

L7020

Axial construction.
L7020A 6.8uh RF Inductor / Choke

6.8uh RF Inductor / Choke

L7020A

Axial construction.

All prices include GST