Components
Altronics component range provides enthusiasts, servicing specialists and OEMs with access to a massive selection of products from world renowned manufacturers.
Description | Downloads | Specs | Ordering | ||
---|---|---|---|---|---|
Red 90mcd 10mm LEDZ0900 |
| 10mm Led Red Viewing Angle: 50 degrees Brightness: 90mcd Voltage Typical: 2V Voltage Max: 2.6V Current: 30mA Current Peak: 150mA | |||
Red 200mcd 10mm LEDZ0900A ROHS |
| 10mm Led Red Viewing Angle: 60 degrees Brightness: 200mcd Voltage Typical: 2V Voltage Max: 2.6V Current: 30mA Current Peak: 150mA | |||
Green 100mcd 10mm LEDZ0901 |
| 10mm Led Green Viewing Angle: 50 degrees Brightness: 100mcd Voltage Typical: 2.2V Voltage Max: 2.6V Current: 30mA Current Peak: 150mA | |||
Green 200mcd 10mm LEDZ0901A NEW |
| 10mm Led Green | |||
Yellow 80mcd 10mm LEDZ0902 |
| 10mm Led Yellow Viewing Angle: 50 degrees Brightness: 80mcd Voltage Typical: 2.1V Voltage Max: 2.6V Current: 30mA Current Peak: 150mA | |||
Yellow 200mcd 10mm LEDZ0902A |
| 10mm Led Yellow | |||
White 5500mcd 10mm LEDZ0908 |
|
| 10mm Led White, Water Clear Style | ||
White 5500mcd 10mm LEDZ0908A |
|
| 10mm Led White, Water Clear Style | ||
Red 50mcd 10mm Flashing LEDZ0945 ROHS |
|
| 10mm flashing red. | ||
Red High Intensity 8000mcd 10mm LEDZ0952A ROHS |
|
| 10mm Led Red Hi Intensity 8000mcd, Water Clear Style | ||
8xGreen / 1xYellow / 1xRed Bar Graph LEDZ0964 ROHS |
| PCB Mount Bar Graph LED display Two or more of these bar graphs can be ganged together to give a longer LED display. Size: 25.3 x 10.16mm. Uses standard 20 pin DIL spacing | |||
10 x Red Bar Graph LEDZ0966 |
| PCB Mount Bar Graph LED display Two or more of these bar graphs can be ganged together to give a longer LED display. Size: 25.3 x 10.16mm. Uses standard 20 pin DIL spacing | |||
5xGreen Bar Graph LEDZ0970A ROHS |
| Horizontal Bar Graph LED display 5 Segment Bar Graph LED Display Two or more of these bar graphs can be mounted side by side to give longer LED arrays. ie. 10, 15, 20, 25, etc. All Models are 35 x 5 mm with 5 Segments. | |||
5xRed Bar Graph LEDZ0972A |
| Horizontall Bar Graph LED display 5 Segment Bar Graph LED Display Two or more of these bar graphs can be mounted side by side to give longer LED arrays. ie. 10, 15, 20, 25, etc. All Models are 35 x 5 mm with 5 Segments. | |||
8x8 Red LED Matrix DisplayZ0975 |
|
| This miniature LED matrix has everything a big LED matrix has, but bite sized! 64 bright red LEDs are contained inside the plastic body, in an 8x8 matrix. | ||
8x8 RGB LED Matrix DisplayZ0977 |
|
| Designed to mount directly onto a LED Driver module. These modules can be stacked for extended displays. | ||
Green 28mcd 12V 5mm LED With ResistorZ0982 ROHS |
|
| These 5mm LEDs include an internal dropping resistor enabling them to be connected directly to a 12V DC power supply. | ||
Red/Green/Blue 5mm LEDZ0999 ROHS |
| Forward voltage (typ.): 1.8V (Red) 3.2V (Green) 3.2V (Blue) Forward voltage (max.): 2.35V (Red) 4.0V (Green) 4.0V (Blue) Luminous Intensity (mcd): 500 (Red) 1200 (Green) 600 (Blue) Viewing Angle: 55 Peak Forward Current: 100mA Continuous Forward Cu | |||
LP2950 3.3V 100mA TO-92 Fixed Voltage Regu...Z1025 ROHS |
| The LP2950 devices is a bipolar, low-dropout voltage regulator that can accommodate a wide input supply-voltage range of up to 30 V. The easy-to-use, 3-pin LP2950 is provides 3.3V output. | |||
LP2950 5V 100mA TO-92 Fixed Voltage RegulatorZ1027 ROHS |
| The LP2950 device is a bipolar, low-dropout voltage regulator that can accommodate a wide input supply-voltage range of up to 30 V. The easy-to-use, 3-pin LP2950 provide 5V output. | |||
PNP BC327 T092h General Purpose TransistorZ1030 ROHS |
|
| General Purpose Transistor | ||
NPN BC337 T092h General Purpose TransistorZ1035 ROHS |
|
| General Purpose Transistor | ||
NPN BC338 T092h General Purpose TransistorZ1037 ROHS |
|
| General Purpose Transistor | ||
NPN BC546 T092h General Purpose TransistorZ1039 ROHS |
|
| General Purpose Transistor | ||
NPN BC547 T092h General Purpose TransistorZ1040 ROHS |
|
| General Purpose Transistor |