|
Description |
Downloads |
Specs |
Ordering |
|
 |
P7316A |
|
|
|
Toslink to Toslink S/PDIF Optical Audio Lead, 10m. |
 |
H8182A |
|
- Suits VESA sizes 75x75, 100x100 and 200x200
- Supports weights of up to 25kg
- Rotate Screen: -180° ~ +180°
- Pan/Tilt: -5° ~ 10°
- Suits flat monitors
- Depth from surface: 52-342mm
|
|
A compact articulated wall bracket for television screens up to 42” in size and 25kg in weight. Max distance from wall 342mm, folds flat to 52mm from wall surface. Provides 180° of adjustment and 15° of tilt. Mounting hole centres at 50mm, 75mm and 200mm square. |
 |
P7357 |
|
- Convert complete VGA signal into HDMI output.
- Support the exchange between digital signal and analog signal.
- Support HDCP 1.0/1.1/1.2.
- Quick installation, simple operation without setting driver.
- Built-in conversion chip, support hot-swapping.
- VGA video input formats: 640x480, 720x576, 800x600, 1024x768,1280x720, 1280x768, 1280x960,1280x1024,1360x768, 1366x768, 1400x1050, 1440x900, 1600x900, 1600x1200, 1680x1050, 1920x1080.
- HDMI video output formats:480i, 480p, 576i, 576p, 720p, 1080i, 1080p.
|
|
Converts VGA signal to HDMI. Ideal for connecting VGA equipment to modern HDMI monitors & televisions. Supports virtual 7.1ch audio over HDMI or 3.5mm stereo output. |
 |
A2305A |
|
- Screw terminal connections
- Suits standard single gang wall box
- Compatible with all 8 ohm stereo amplifiers
- Suits one pair of speakers
- Australian Designed & Made
|
|
Rated at 60 watts (30W per channel). Fully self contained on a single gang switch plate. 11 settings plus off. Complete with wiring instructions. All connections are via screw terminals mounted on the PCB. |
 |
A3199A |
|
- For this device to work, the audio settings on a DVD / Blu-ray must be changed to output a lossless PCM digital signal to the coaxial and / or optical outputs. It will not work if another output format is used e.g. Dolby, DTS HD. Supports Digital Audio Format: LPCM (Linear Pulse Code Modulation). LPCM is part of the international standards for DVD, Blu-ray and HDMI. With any setting other than PCM, the signal error LED will light up. With audio output parameters set to PCM, the device will convert a digital 5.1 surround signal input to analogue stereo output from the device, and then into an A/V receiver amplifier or stereo system.
|
|
Converts a digital audio output (from a DVD player, set top box etc) into a standard stereo line level signal for connection to a stereo or commercial amplifier system. Both coaxial and optical (Toslink) input connections are provided. |
 |
D0985 |
|
- Clear, crisp audio
- Easily Portable
- Centered mute button
- Rugged diecast
- Rubber feet for isolation from external noise
- Compatible with Windows and Mac OS
|
|
It plugs into your laptop via USB type C connection and provides clear and crisp audio for group conferencing and one on one communications. |
 |
A3089A |
|
|
|
Switch between 5 HDMI AV sources with this professional 4K ready HDMI switcher. |
 |
P7526A |
|
|
|
Filtered VGA+3.5mm Stereo DE15 Male-Male Lead, 10m. Ferrite core on each end to reduce EMF interference. Tightly woven shield and cores meet UL2919 specification. |
 |
A3104 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 48Gbps video bandwidth
- Supports resolutions up to 8K@60Hz 4:4:4 8/10/12bit, 8K@60Hz 4:2:0 12-bit, 8K@30Hz 4:4:4 10-bit, 4K@120Hz 4:4:4 10-bit
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- VRR, FVA, ALLM supported
- Supports HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio.
- 2x1 switch output, auto switch supported
- Built-in Equalizer and Driver
- Auto EDID management
- Compact design for easy and flexible installation
|
|
Offering 8K @ 60Hz resolution switching, this 2 way HDMI source selector is ready for the latest high resolution AV sources. |
 |
H8138 |
|
- Mounts To: Wall
- Screen Size: 32" to 65"
- Max VESA Dimensions: 600 x 400mm
- Max Weight: 75kg
- Horizontal Adjustment: None
- Vertical Tilt Adjustment: None
- Depth From Mounting Surface: 30mm
- Bracket Dimensions: 670W x 430W x 30D mm
|
|
Designed for LCD screens utilising 600 x 400mm VESA mounting standard . |
 |
H8168A |
|
- Mounts To: Wall
- Screen Size: 37" to 70"/ 940mm - 1780mm
- Max VESA Dimensions: 600x400
- Max Weight: 50kg
- Angle Free Tilting: 0° to -10°
- Spirit Level: Yes
|
|
This tilting wall bracket suits flat TV screens between 37"-70". The bracket not only includes a spirit level but also a built in spring locking system for easy installation. Supports weights up to 50kg. Suits VESA sizes 200x200, 300x300, 400x200, 400x400 and 600x400. |
 |
P7365B |
|
- Ethernet channel
- Audio return channel
- 4k x 2k resolution support (4k at 60Hz 4:4:4)
- 3D over HDMI®
- 18Gbit/s bandwidth
- HDCP compliant
- 26AWG cable guage with fibre wrap shielding
- Supports 48 bit Deep Colour
- Supports Dolby® Digital & DTS®
- Supports Dolby® TrueHDTM & DTS®-HD Master Audio
|
|
Pro High Speed HDMI with Ethernet Lead, 10m. HDMI certified. Lifetime warranty. Diecast platinum finish plugs with gold plated contacts. |
 |
P1984A |
|
|
|
100W USB Type C Male Thunderbolt 3 Lead 2m. |
 |
P7286 ROHS
|
|
|
|
3 RCA Male to 3 RCA Male Composite AV Lead, 0.75m. Diecast connector bodies, gold plated contacts. |
 |
A3126 |
|
|
|
Accepts one stereo audio & composite or S-video signal and distributes it to four outputs. Suitable for domestic or commercial use in showrooms, pubs, clubs, cafes, TABs, etc. Gold RCA connections. |
 |
H8166A |
|
- Mounts To: Wall
- Screen Size: 60" to 100"/ 1524mm - 2540mm
- Max VESA Dimensions: 900 x 600mm
- Max Weight: 75kg
- Horizontal Adjustment: None
- Vertical Tilt Adjustment: None
- Built in spring locking system: Yes
- Spirit Level: Yes
|
|
This fixed wall bracket suits flat TV screens between 60"-100". The bracket not only includes a spirit level but also a built in spring locking system for easy installation. Supports weights up to 75kg. |
 |
H8223 |
|
- Dual-monitor freestanding monitor support.
- Tilt and pan adjustment for better viewing and reduced glare.
- Suits portrait or landscape monitor orientation.
- Height adjustable mounting bracket.
- Detachable VESA mount plate for easy installation.
- Suits VESA mount 75x75mm and 100x100mm.
- Cable clips for wiring management.
|
|
A durable all steel desk mount bracket for computer monitors between 17" and 32" in size, weighing up to 9kg each. |
 |
P7507A |
|
|
|
Filtered VGA DE15 High Density Male-Male Lead, 15m. Ferrite core on each end to reduce EMF interference. Tightly woven shield and cores meet UL2919 specification. |
 |
A0920 |
|
- IR Details
- Range: 100-300m
- IR Frequency: 20-60kHz
- RF Details
- RF Frequency: 915.1MHz
- Tx Power: 2mW
- Rx Current: 3.8mA
- Rx Sensitivity: -90dBm
|
|
This handy device converts the signal from your remote controls to an RF signal. |
 |
A3214 |
|
- Send mono or stereo audio signals over distances up to 670m
- No power required
- Four channel mono or two channel stereo
- Compact design with simple point to point set up
- Great for distributed audio systems where audio sources are located remotely
- Can be used in commercial or domestic audio systems.
|
|
This compact box converts four RCA audio signals into a UTP RJ45 output for transmission over long distance (up to 670m). May be used for two stereo signals or four mono signals. Ideal for domestic and commercial audio systems requiring audio source. |
 |
L2003
|
|
- Provides crystal clear reception in mobile vehicles
- Housing is completely waterproof
- Constructed from UV resistant ASA plastic for long term durability
- Comes complete with power supply, cables, connectors and fitting instructions
- Easy to assemble
|
|
This outdoor antenna is a must have for your caravan, RV or boat. It provides crystal clear reception in mobile vehicles. |
 |
H8183A |
|
|
|
This 26"-55" Flat Screen Ceiling Bracket allows mounting of LCD screens from the ceiling, ideal for use in large areas such as waiting rooms & lobbies. Mounting height from ceiling can be varied from 510mm to 810mm. Provides 180° of horizontal adjustment, with 15° of tilt. Suits VESA 400x400. Supports weight up to 30kg. |
 |
H8220A |
|
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 13-27" weighing up to 8kg. |
 |
A3134E |
|
- Supports full 3D video format
- Displays an Ultra HD source on up to two Ultra HD displays
- Support high resolution up to 3840X2160@60Hz
- Supports four kinds of EDID handling abilities
- Supports HDCP2.2/1.4 Compliant
- Supports 36 bit deep colour
- Supports LPCM 7.1 Dolby True HD, Dolby Digital Plus and DTS-HD Master Audio
- Bandwidth 18G
- Supports HDR
- Supports online firmware upgrade via Micro USB Port
|
|
Allows the connection of a single HDMI source to multiple HDMI displays with no loss of quality. |
|
P7508A |
|
|
|
Filtered VGA DE15 High Density Male-Male Lead, 20m. Ferrite core on each end to reduce EMF interference. Tightly woven shield and cores meet UL2919 specification. |
 |
A2312A |
|
- Pluggable terminal connections
- Adjustable impedance selection
- Suis for up to 8 pairs of stereo speakers
- Compatible with all 8 ohm stereo amplifiers
- No power loss
- No heat generation
- No loss of audio quality
|
|
This volume control is rated at 100 watts (50W per channel). It features selectable impedance matching, allowing up to 8 pairs of speakers to be controlled. Includes 11 settings plus Off. Connections are made via a pluggable terminal block. 60mm mounting |
 |
A1168 |
|
- Foxtel compatible (channel & volume controls only)
- 4 x Emitter output connections
- Power socket with LED indicator
- Large detachable IR target connection
|
|
Includes hub, one infra red target and two dual infra red emitters and power supply. |
 |
P7336B |
|
|
|
HDMI certified. Lifetime warranty. High performance and V2.0 compliant. 18Gbits/s TMDS bandwidth. 48 bit/px deep colour. |
|
PB7509 ROHS
|
|
|
|
Filtered VGA DE15 High Density Male-Male Lead, 30m. Ferrite core on each end to reduce EMF interference. Tightly woven shield and cores meet UL2919 specification. |
 |
A3830B |
|
- Compliant with HDMI, HDCP 1.2 and DVI 1.0
- Supports HDMI audio sampling rate up to 192 kHz
- Supports Optical S/PDIF audio sampling rate up to 192 kHz
- HDMI supports high-bit-rate (HBR) audio
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Supports 4 x 3.5mm phone jack for analog multi-channel audio outputs
- Maximum input and output HDMI cable length can run up to 15 meters at 1080p 8-bit resolution or 10 meters at 1080p 12-bit resolution
- Supports built-in audio EDID switching among LPCM 7.1CH, TV (external) EDID, and Bitstream audio
- Supports CEC bypass
- Supports 4Kx2K resolution and 3D signal
|
|
Allows you to split the audio stream from a HDMI signal into either S/PDIF optical or four analog stereo 3.5mm jack outputs - ideal for 7.1 multi-channel systems. |
 |
H8230A |
|
- Keyhole Pattern: allows for easy installation
- USB ports in base for connection to peripherals.
- Gas Spring: perfectly counterbalances the weight of your monitor
- Built-In Spring Gauge: for perfect weight adjustment
- Cable Management: keeps everything organized
- Non-skid Silicone Pads: protect work surface from scratches or scuffs
- Supports up to 6kg
|
|
This stylish desk mount bracket simply clamps or screws to your desk and supports a 13" to 27" monitor weighing up to 6kg. |
 |
H8169A |
|
- Mounts To: Wall
- Screen Size: 55 to 90 inch/ 1397mm - 2286mm
- Max VESA Dimensions: 800 x 600mm
- Max Weight: 50kg
- Angle Free Tilting: 0~-8°
- Spirit Level: Yes
- Spring Locking System: Yes
|
|
This tilting wall bracket suits flat TV screens between 55"-90". The bracket not only includes a spirit level but also a built in spring locking system for easy installation. Supports weights up to 50kg. |
 |
S9253 |
|
|
|
Transmit clear composite video, stereo audio and infra-red up to 300m over economical Cat 5e/6 cable. Ideal way to send video and audio to a remote location. The infra-red signal also allows you to control your equipment remotely. |
 |
A0930 |
|
- Compatible with all universal full band carrier frequency infrared remote
- Better IR receive sensitivity (distance), over 7 meters
- Long range transmission up to 100 meters (open space)
- 915.1 MHz RF technology to ignore current 433MHz RF-interference
- FSK modulation:
- Better signal sensitivity than ASK modulation
- Better anti RF-interference than ASK modulation
- Better noise suppression
- Digital encrypted function ensures safety and reliability
- Supports Individual and broadcasting IR control
- Channel pairing function.
|
|
Allows you to repeat infra-red control signals from your TV to remotely located equipment. |
 |
A3135F |
|
- Simultaneously displays an UItra Hi-Def source on up to four UItra HD displays
- Video Resolutions up to UItra HD 4Kx2K (3840x2160p)@60Hz YUV 4:4:4
- Three kinds of EDID handling abilities
- HDCP2.2/1.4 Compliant
- 36 bit Deep Color
- LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio
- Bandwidth 18Gbps
- Supports HDR
- Online firmware upgrade via Micro USB Port
|
|
This is a high performance 1x HDMI input to 4x HDMI output switcher which is powered via a USB port. |
 |
A3217D |
|
- Transmits up to 70m without signal loss
- One-way IR signal transmission
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Compact design for discrete and flexible installation
- Supports cascading via additional HDMI loop out
- Supports video resolution up to 4k2k@30Hz YUV 4:4:4
- Supports copying EDID from receiver display or loop out display
- Supports Power over Cable (from transmitter to receiver)
|
|
This extender can send HD video/audio signal and IR control up to 70m@1080p, and 40m@4K30 resolution via a single CAT5e/6 cable with zero-delay and uncompressed transmission. The HDMI loop output can be cascaded to the next extender, supporting resolution up to 4K@30Hz. |
 |
A3502A |
|
- Integrates stereo composite signals from devices
- Convert a standard stereo composite signal into an integrated HDMI 1080p video and digital audio signal
- 3.5mm stereo audio and digital coaxial outputs provided
- Fitted with HDMI input and output
- Power supply included
|
|
An upscaler box for integrating stereo composite signals from devices such as CCTV cameras, older camcorders and AV equipment. Converts a standard stereo composite signal into an integrated HDMI 1080p video and digital audio signal. 3.5mm stereo audio and digital coaxial outputs provided. |
 |
P7347 |
|
- Ethernet channel
- Audio return channel
- 4k x 2k resolution support
- 3D over HDMI®
- 18Gbit/s (340MHz) bandwidth
- HD resolution 1920 x 1080 and 4k
- HDCP compliant
- Supports 48 bit Deep Colour
- Supports Dolby® Digital & DTS®
- Supports Dolby® TrueHDTM & DTS®-HD Master Audio
|
|
Supplied without packaging. Bulk lead for installers and OEMs. HDMI certified. High performance and V2.0 compliant. Supports 4K resolutions at 60fps. |
 |
P7427 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
P7427A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- Supports eARC
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7366B |
|
- Ethernet channel
- Audio return channel
- 4k x 2k resolution support (4k at 30Hz)
- 3D over HDMI®
- 18Gbit/s bandwidth
- HDCP compliant
- 24AWG cable guage with fibre wrap shielding
- Supports 48 bit Deep Colour
- Supports Dolby® Digital & DTS®
- Supports Dolby® TrueHDTM & DTS®-HD Master Audio
|
|
Pro High Speed HDMI with Ethernet Lead, 15m. HDMI certified. Lifetime warranty. Diecast platinum finish plugs with gold plated contacts. |
 |
H8147A |
|
- Mounts to: Wall
- Screen size: 32" to 50"
- Max VESA dimensions: 400 x 400mm
- Max weight: 25kg
- Horizontal adjustment: 180 deg.
- Vertical tilt adjustment: -2 to 20 deg.
- Extension range: 62 - 426mm from wall
|
|
This swing-arm design allows mounting screens of up to 25kg in the corner of a room or where screen adjustment is required. Suitable for screens utilising 400mm VESA mounting (MIS-F). This low profile bracket suits screens up to 50" screen size. |
|
P7428 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7428A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- Supports eARC
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
A3138A |
|
- HDCP 1.4 compliant
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
 |
A3139A |
|
- HDCP 1.4 complaint
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
|
P7429 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7429A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- Supports eARC
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
A3105 NEW
|
|
|
|
Offering 8K @ 60Hz resolution switching, this 4 way HDMI source selector is ready for the latest high resolution AV sources. |
 |
A3226 |
|
|
|
Receiver for use with the A 3224 HDMI Extender Kit and the A 3225 HDMI Extender Tranceiver. For multiple screens daisy chained from a single signal source use up to 6 tranceivers with a receiver at the very end. |
|
P7430 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7430A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7338B |
|
|
|
HDMI certified. Lifetime warranty. High performance and V2.0 compliant. 18Gbits/s TMDS bandwidth. 48 bit/px deep colour. |
 |
A3141 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
 |
A3221A |
|
- Huge 300m range over a single solid core Cat5e/cat6 cable
- Support for up to 1900 x 1200 resolution
- SVGA and RJ45 output on the transmitter unit.
- Compatible with any TV, monitor or projector with a VGA output.
|
|
Permits audio & video transmission over Cat 5e/6 cable. |
 |
PB7309 |
|
- Connector: Type A Male, Gold
- Wire gauge: 26AWG
- Wire material: Bare copper
- Out-diameter: 8.5mm
- Resolution: 4K (3840 x 2160) @ 60Hz max.
- Data rate: 10.2GBPS
- Colour depth: 36BIT
- Type of shielding: Triple shield
|
|
HDMI certified. Lifetime warranty. This range is supplied in a plastic bag only, Features booster amplifier for lower grade screens. |
 |
A3112 |
|
- 1 input / 2 outputs.
- HDMI 2.0b, HDCP2.2/1.4 compliant.
- Maximum HDMI resolution up to 4K2K@50/60Hz (4:4:4).
- Supports digital & analog audio extraction from HDMI source.
- Supports output bypass and 4K to 1080P downscaling.
|
|
Designed to split a single HDMI source into four HDMI outputs. |
 |
A2384 |
|
- Rated power: 50W RMS per channel
- Attenuation: 10 step control
- Pos 1: OFF
- Pos 2-3: 6db per step
- Pos 4-10: 3dB per step
- Channel separation: 38dB @ 1KHz
- Crosstalk (between ch.): 50dB @ 1KHz
- Wire size: 14-22AWG
- Dimensions (mm): 218W x 50H x 185D
|
|
Allows on/off switching and level control of two sets of either 4Ω or 8Ω stereo speakers. Includes impedance correction circuit and a protection switch for use with 4Ω speakers. Power capacity up to 50W RMS per channel. Each stereo speaker |
 |
A3140 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
 |
H8232A |
|
- Application: Desk mount
- Screen Size: 13"(330mm) - 27"(686mm)
- Weight Capacity: 6kg
- VESA Standard: 75x75,100x100
- Pan/Tilt: -90°~+90°
- Rotate: -180°~+180°
- Cable Management: Yes
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 13"-27" weighing up to 6kg. Includes 2 USB ports. |
 |
H8126C |
|
- Low profile design - only 55mm deep!
- +3 to 15° tilt adjustment.
- 60° swivel adjustment.
- Plastic mount covers provide a neat & tidy finish.
- Cable management guides.
- Built in levelling adjustment.
- Makes easy forward or backward viewing angle adjustments for reduced glare and eye strain.
- Sturdy and durable steel construction.
|
|
The new H 8126C is made of high-grade steel that delivers a lifetime of satisfaction. It can accommodate TVs up to 60kg in weight. In addition, it is able to tilt up and down from +3° to -15° and swivel up to 60° in either horizontal direction to find you best position while watching TV. |
 |
H8232B NEW
|
|
|
|
This stylish desk mount bracket simply clamps to your desk and supports screen sizes 17"-32" weighing up to 6kg. Includes 2 USB ports. |
|
P7432 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
- Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru - Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No external power supply required.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7432A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m.
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
 |
A3082 |
|
- RS-232 port for remote control.
- Video formats up to 4Kx2K@60Hz.
- Compliant with HDMI 2.0a, DVI 1.0.
- Digital and analog extracted audio output.
- HDCP 2.2 and HDCP 1.4 compliant.
- Support PCM, Dolby TrueHD, DTS-HD Master Audio up to 7.1CH.
- Switches 4 HDMI sources to a single HDMI output.
|
|
This compact 4-way HDMI switcher features manual & infra-red remote control for switching up to 4 sources to a single display supporting resolutions up to 4k 60Hz. |
|
P7433 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
P7433A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m.
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
|
PB7311 |
|
- Connector: Type A Male, Gold
- Wire gauge: 26AWG
- Wire material: Bare copper
- Out-diameter: 8.5mm
- Resolution: 4K (3840 x 2160) @ 30Hz max.
- Data rate: 18GBPS
- Colour depth: 36BIT
- Type of shielding: Triple shield
|
|
HDMI certified. Lifetime warranty. This range is supplied in a plastic bag only, Features booster amplifier for lower grade screens. |
 |
A3225 |
|
|
|
Transceiver for use with our A3224 multi-zone HDMI extender system. This unit not only acts as a receiver for the incoming signal from the A3224 transmitter but also retransmits the signal so it can be daisy chained with up to 6 additional screens. |
|
P7434 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
A3114 |
|
- 1 input / 4 outputs.
- HDMI 2.0b, HDCP2.2/HDCP1.4 compliant.
- Maximum HDMI resolution up to 4K2K@50/60Hz (4:4:4).
- Supports digital & analog audio extraction from HDMI source.
- Supports output bypass and 4K to 1080P downscaling.
|
|
Designed to split a single HDMI source into four HDMI outputs. |
 |
P7434A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m.
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
A3255 |
|
- Extends USB 2.0 range up to 50 meters at 480Mbit/s
- Transparent to USB hosts and devices, no driver is needed
- Support hot swap, plug and play
- Ideal for extending the reach of USB2.0 I/O devices such as cameras, display cards, network adapters, hard drives, flash drives, mp3 players, CD/DVD ROMs, printers and scanners, etc. between rooms
- ESD protection level to HBM ±4 kV （Contact Discharge）
- Standard wall plate outline, easy to install.
- Includes Power Supply
|
|
A point to point USB2.0 over UTP balun pair mounted into a wallplate for transmission of USB data between rooms. Installation is made easier via PoE, which only requires a single power source at either the receiver or transmitter end. |
 |
PA7427 NEW
|
|
- Armoured sheath for added protection
- Stainless steel and kevlar braiding
- Screw top plug housings for protecting plugs when not in use.
- 4K@60Hz 4:4:4 Resolution.
- 18Gbps Bandwidth.
- HDMI® and HDCP 2.2 compliant.
- Supports eARC
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
|
|
This 10m Active Optical HDMI male to HDMI male cable is the new solution for using optical HDMI cables in temporary AV set ups for live events & functions.
|
 |
P7470 |
|
- 8K@60Hz/4K@120Hz 4:4:4 Resolution
- 48Gbps Bandwidth total
- HDR 10+/Dolby Vision Compliant
- Hybrid optical cable with fiber and copper wire
- HDCP V2.3
- Supports eARC
|
|
Suitable for use with HDMI compliant equipment and are capable of 8K resolutions at 60Hz and 4K resolutions at up to 120Hz. |
|
P7471 |
|
- 8K@60Hz/4K@120Hz 4:4:4 Resolution
- 48Gbps Bandwidth total
- HDR 10+/Dolby Vision Compliant
- Hybrid optical cable with fiber and copper wire
- HDCP V2.3
- Supports eARC
|
|
Suitable for use with HDMI compliant equipment and are capable of 8K resolutions at 60Hz and 4K resolutions at up to 120Hz. |
 |
A3136D NEW
|
|
- HDCP 2.2 compliant
- Supports 18Gbps bandwidth
- Supports resolution up to 4K@60Hz 4:4:4
- Supports HDR function
- Supports COPY/AUTO EDID control via dialling the DIP switch
- Compact design for easy and flexible installation
|
|
Allows the connection of multiple HDMI displays to a single HDMI source with no loss of signal quality. |
 |
C5160
|
|
- User Friendly: Simple plug and play interface
- Bluetooth: Stream audio wirelessly from any bluetooth enabled device
- Power Source: Large 39.96Wh internal battery for long play times (6 to 8 hours at 80% volume)
- TWS: True wireless stereo pairing synchronize two speakers together to play the same music
- USB Port & Micro SD Card Slot: Access music stored on memory devices
- FM Radio: Digital FM tuner with auto scan
- Digital Recorder: Record music and spoken word applications directly onto your flash drive
- Wireless Microphone: Included in box, features volume & echo controls
- Mic Inputs: Microphone input with independent volume and echo controls
- Volume Control: Independant master volume, bass & treble controls
- AUX Input: Plug and play smart phones, tablets & MP3 players
- Party Lights: Exciting lighting effect with multiple colours
|
|
This Bluetooth party speaker and wireless mic PA system has been designed for outdoor or indoor entertaining with colour LED lighting for added party atmosphere. |
|
P7472 |
|
- 8K@60Hz/4K@120Hz 4:4:4 Resolution
- 48Gbps Bandwidth total
- HDR 10+/Dolby Vision Compliant
- Hybrid optical cable with fiber and copper wire
- HDCP V2.3
- Supports eARC
|
|
Suitable for use with HDMI compliant equipment and are capable of 8K resolutions at 60Hz and 4K resolutions at up to 120Hz. |
 |
PA7429 |
|
- Armoured sheath for added protection
- Stainless steel and kevlar braiding
- Screw top plug housings for protecting plugs when not in use.
- 4K@60Hz 4:4:4 Resolution.
- 18Gbps Bandwidth.
- HDMI® and HDCP 2.2 compliant.
- Supports eARC
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
|
|
This 15m Active Optical HDMI male to HDMI male cable is the new solution for using optical HDMI cables in temporary AV set ups for live events & functions.
|
 |
A3242 |
|
- Extends HDMI signals over distances up to 60m at 4k@ 60Hz 4:4:4 resolutions.
- HDMI 2.0, HDCP 2.2 HDCP 1.4 and DVI 1.0 compliant
- Supports 18Gbps bandwidth
- Supports one HDMI loop output
- Supports one-way IR pass-through
- Supports HDR function
|
|
Designed to extend HDMI signals over distances up to 60m across economical UTP cabling. |
 |
H8123 |
|
- Mounts To: Ceiling
- Screen Size: 37" to 90"
- Unit Depth: 210mm
- Max mounting dimensions: 800mm x 500mm
- Max Weight: 75kg
- Horizontal Adjustment: 130°
- Vertical Tilt Adjustment: 15°
- Distance from ceiling: 102.4cm - 122.4cm
|
|
Allows mounting of LCD screens from the ceiling, ideal for use in large areas such as waiting rooms & lobbies. Mounting height from ceiling can be varied from 102.4cm to 122.4cm. Cables can be run inside the bracket pole for a neat installation. |
 |
P7460 |
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. DisplayPort Male Lead, 1.8m. |
 |
P7460A NEW
|
|
- Supports 8K @ 60Hz
- 32Gbps Bandwidth total
- DisplayPort 1.4 Compliant
- HDCP 2.2 Compliant
- Hybrid fibre and copper cable
- Slimline plug suits 25mm conduit
|
|
This range of Optical DisplayPort male to male leads have been constructed and designed using hybrid fibre and copper cable to ensure high-definition performance. DisplayPort Male Lead, 1.8m. |
|
P7436 |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® 2.0 and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m (33 to 328ft).
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play.
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve.
|
|
P7473 |
|
- 8K@60Hz/4K@120Hz 4:4:4 Resolution
- 48Gbps Bandwidth total
- HDR 10+/Dolby Vision Compliant
- Hybrid optical cable with fiber and copper wire
- HDCP V2.3
- Supports eARC
|
|
Suitable for use with HDMI compliant equipment and are capable of 8K resolutions at 60Hz and 4K resolutions at up to 120Hz. |
 |
P7436A |
|
- 4K/UHD - Video resolution up to 18G 4K@60 4:4:4.
- HDMI® and HDCP 2.2 Compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Varied Selection of Lengths - Available in models from 10 to 100m.
- Zero Compression - Zero compression and zero latency.
- Multi-channel Audio Extension - Up to 32 channels of uncompressed digital stereo signals for studio-grade surround sound.
- EDID Pass Thru- Pass EDID signals from the display to source.
- EMI & RFI Immunity.
- No External Power Supply Needed.
- Easy to Use - Simple to install, plug and play
|
|
Cutting edge optical HDMI technology supporting 4K @ 60Hz resolutions at longer lengths than copper cable can achieve. |
 |
PA7430 |
|
- Armoured sheath for added protection
- Stainless steel and kevlar braiding
- Screw top plug housings for protecting plugs when not in use.
- 4K@60Hz 4:4:4 Resolution.
- 18Gbps Bandwidth.
- HDMI® and HDCP 2.2 compliant.
- HDR 10 (High Dynamic Range) - More life-like images through a greater range of luminance levels.
- Available in lengths up to 100m.
|
|
This 20m Active Optical HDMI male to HDMI male cable is the new solution for using optical HDMI cables in temporary AV set ups for live events & functions.
|
 |
A3106 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4
- 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for two HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any two display devices. It supports video resolution up to 8K@60Hz 4:2:0. |
 |
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
 |
A3242B NEW
|
|
- HDMI 2.0b and HDCP 2.2 compliant
- Supports 18Gbps video bandwidth
- Supports video resolution up to 4K/2K@60Hz RGB/YCBCR 4:4:4
- The transmission distance can be extended up to 70m via a single CAT6/6a cable
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG
- Support bi-directional IR control signal pass-through
- Audio formats: LPCM 7.1, Dolby True HD, DTS HD Master
- EDID copy pass-through function between the source device and display device
- Support ARC and audio de-embedding, audio is output through the optical fibre port of the receiver
- Support bi-directional POC (Power over Cable) function
- Compact design for easy and flexible installation
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
|
P7474 |
|
- 8K@60Hz/4K@120Hz 4:4:4 Resolution
- 48Gbps Bandwidth total
- HDR 10+/Dolby Vision Compliant
- Hybrid optical cable with fiber and copper wire
- HDCP V2.3
- Supports eARC
|
|
Suitable for use with HDMI compliant equipment and are capable of 8K resolutions at 60Hz and 4K resolutions at up to 120Hz. |
 |
A3145 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. It can also be used as a simple point to point extender. |
 |
S8864A NEW
|
|
- Sturdy adjustable back stand
- 1280x800 resolution
- USB PVR recording support
- HDMI input
- AV input
- HD tuner
- Headphone output
- SD card slot
- IR Remote control
|
|
A must have for your next caravan, boating or camping trip. This portable 14 inch TV allows you to enjoy high definition entertainment on the go thanks to its in-built lithium battery. |
 |
A3245 NEW
|
|
- Extend both HDMI signal plus USB peripherals.
- Transmission up to 70m over Cat6/6a UTP cabling.
- Ideal for remote operation of PC equipment.
- HDMI 2.0b, HDCP 2.2 compliant.
- 18Gbps video bandwidth.
- EDID management.
- Includes transmitter & receiver.
- Supports USB 1.1 KVM pass-through.
|
|
This product is designed to extend HDMI signals over distances up to 70m using Cat6/6a cabling. In addition it also allows USB peripherals to control a connected computer from the receiver end. |
 |
A3144 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. |
 |
A3606 NEW
|
|
- General
- System Video Resolution: 4K60; 4K30; 4K24; 1080P60/50/30/24;1080i60/50; 720P/60/50/30 480P
- Audio: Stereo, 44.1KHz
- Wireless standard: IEEE 802.11b/g/n/ac, 2.4G/5GHz, 2T2R
- Latency: About 100ms latency
- HDMI Version: HDMI 2.0 with HDCP2.2
- Platform: supported Any devices that support HDMI Port
- Distance: ≈150m in the clear line of sight
- Receiver
- Interface: HDMI out x1; USB x 2; Type C x1
- LED: Blue LED x 1
- Power supply: DC5V/2.1A
- Power Consumption: About 5W
- Dimension: 154*77.5*21mm
- Weight: 330g
|
|
An additional receiver unit for the Dynalink A3605 4K wireless HDMI sender system. |
|
P7475 |
|
- 8K@60Hz/4K@120Hz 4:4:4 Resolution
- 48Gbps Bandwidth total
- HDR 10+/Dolby Vision Compliant
- Hybrid optical cable with fiber and copper wire
- HDCP V2.3
- Supports eARC
|
|
Suitable for use with HDMI compliant equipment and are capable of 8K resolutions at 60Hz and 4K resolutions at up to 120Hz. |
Dynalink
THIS PRODUCT CONTAINS A BUTTON BATTERY.
