|
Description |
Downloads |
Specs |
Ordering |
|
|
P7958A |
|
|
|
Fitted with HDMI 2.0 sockets on both ends. 150mm fly lead |
|
P5971 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HDMI high speed with Ethernet (1.4) connection and 3.5mm stereo. Supplied with two facia covers to suit your decor. |
|
A3830B |
|
- Compliant with HDMI, HDCP 1.2 and DVI 1.0
- Supports HDMI audio sampling rate up to 192 kHz
- Supports Optical S/PDIF audio sampling rate up to 192 kHz
- HDMI supports high-bit-rate (HBR) audio
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Supports 4 x 3.5mm phone jack for analog multi-channel audio outputs
- Maximum input and output HDMI cable length can run up to 15 meters at 1080p 8-bit resolution or 10 meters at 1080p 12-bit resolution
- Supports built-in audio EDID switching among LPCM 7.1CH, TV (external) EDID, and Bitstream audio
- Supports CEC bypass
- Supports 4Kx2K resolution and 3D signal
|
|
Allows you to split the audio stream from a HDMI signal into either S/PDIF optical or four analog stereo 3.5mm jack outputs - ideal for 7.1 multi-channel systems. |
|
P7962A |
|
|
|
Double sided pluggable design for connection with pre-made leads. Suits Clipsal & regular wallplates. HDMI V2.0 |
|
P6616A |
|
|
|
HDMI to HDMI cable joiner. |
|
P7960 |
|
|
|
Double sided pluggable design for connection with pre-made leads. Horizontal entry. |
|
A3145 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. It can also be used as a simple point to point extender. |
|
A3144 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. |
|
A3141 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
|
A3140 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
|
A3218C |
|
- Compact design for easy and flexible installation
- HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant.
- Supports 18Gbps video bandwidth.
- Single Cat5e/6 cable transmission: 120m @ 4K2K, 150m @ 1080p.
- HDMI loop output on transmitter
- Analogue 3.5mm stereo output on receiver
- Bi-directional IR control (two targets and two emitters included)
- RS232 pass-through
- CEC pass-through
- HDR, HDR10+, Dolby Vision and HLG support
- Supports PoC (Power over Cable)
|
|
This 18Gbps HDMI Extender can extend high definition video / audio signal, RS-232, bi-directional IR, and the distance is up to 492ft / 150 meters between transmitter and receiver via a single CAT cable. |
|
A3139A |
|
- HDCP 1.4 complaint
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
|
A3138A |
|
- HDCP 1.4 compliant
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
|
P7355A |
|
|
|
HDMI Plug to DVI-D socket adaptor. |
|
A3124 |
|
|
|
A compact, single box solution for extending HDMI lead lengths. Simply plugs in line and boosts signal allowing lead lengths up to 25m. Ideal for situations where home theatre equipment is located remotely from the screen or projector. HDCP 2.2/1.4 compliant.
|
|
A1127A |
|
- 1080p modulated resolution
- HDMI loop through
- 1080 HDMI input
- H.264 video compression
- 30dB MER (typical)
- 100BuV ±5 output level
- RF TV antenna input
- 38-56kHz IR frequency
- 9V IR pass over RF
- Includes power supply
|
|
A high performance HD modulator for HDMI sources with IR return path and HDMI loop through. |
|
A1129A |
|
- 1080p modulated resolution
- HDMI 4K pass through
- H.264 video compression
- 30dB MER (typical)
- 100dB output level
- RF TV antenna input
- 177-858MHz frequency
- Includes power supply
|
|
A high performance HD modulator module able to generate a signal in DVB-T format (Digital Terrestrial Television) from HDMI input. |
|
P7370A |
|
|
|
Right Angle HDMI Adaptor. Downward direction adaptor. |
|
P7371A |
|
|
|
Right Angle HDMI Adaptor. Upward direction adaptor. |
|
PB5970 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HDMI high speed with Ethernet (1.4) connection. Supplied with two facia covers to suit your decor. |
|
P7356A |
|
|
|
HDMI Socket to DVI-D plug adaptor. |
|
PA6600A |
|
|
|
HDMI socket to socket wallplate fly lead. Fitted with screw mount recesses for attaching to custom AV wallplates. |
|
P7374A |
|
|
|
Converts a standard HDMI lead into a micro HDMI connection. |
|
P7375A |
|
|
|
Converts a standard HDMI lead into a mini HDMI connection. |
|
P1925 |
|
|
|
HDMI to Micro HDMI adapter lead. |
|
P7354A |
|
|
|
This lead adaptor converts a HDMI signal to VGA and splits the audio signal to a 3.5mm stereo jack output. This allows high quality video signals to be transmitted over greater distances. |
|
PB5962 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Latest HDMI high speed with Ethernet (1.4) connection. Rear is fitted with 150mm fly leads and HDMI and USB type A socket for easy connection. Supplied with two facia covers to suit your decor. |
|
P5962 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HDMI and USB Type A. Supplied with two facia covers to suit your decor. |
|
PC5962 NEW
|
|
|
|
HDMI and USB type A connections fitted to a Clipsal Pro Series wall plate which has been specifically designed for commercial building installations. Rear is fitted with 150mm fly leads with HDMI and USB type A socket for easy connection. |
|
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
|
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
|
PB5959 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead type HDMI, VGA, USB type A and 3.5mm. Includes flylead connections for easy on-site termination. Supplied with both Clipsal and HPM Front faceplates. |
|
P5959 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA, 3.5mm audio, HDMI & USB Type A. Supplied with two facia covers to suit your decor. |
|
P5950 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with VGA, HDMI and 3.5mm audio. Supplied with two facia covers to suit your decor. |
|
P5970 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
HDMI wallplate with flylead connections. Fitted with dual HDMI high speed with Ethernet connection. Supplied with two facia covers to suit your decor. |
|
P5949 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with VGA, HDMI, 3.5mm audio & USB Type B. Supplied with two facia covers to suit your decor. |
|
A1171A |
|
- 4 x Emitter output connections
- Power socket with LED indicator
- Large detachable IR target connection
- Compact surface mount package
|
|
Includes hub, one infra red target and two dual infra red emitters and power supply. |
|
A0924 |
|
|
|
IR emitter to work with the A0920 IR Repeater. |
|
A0923 |
|
|
|
Plug in IR Receiver unit.
|
|
A0920 |
|
- IR Details
- Range: 100-300m
- IR Frequency: 20-60kHz
- RF Details
- RF Frequency: 915.1MHz
- Tx Power: 2mW
- Rx Current: 3.8mA
- Rx Sensitivity: -90dBm
|
|
This handy device converts the signal from your remote controls to an RF signal. |
|
H8188 |
|
- Mounts To: Wall
- Screen Size: 10 to 37"
- Max VESA Dimensions: 200 x 200mm
- Max Weight: 25kg
- Horizontal Adjustment: None
- Vertical Tilt Adjustment: None
- Depth From Mounting Surface: 19mm
- Bracket Dimensions: 235 x 275mm
|
|
Fixed LCD monitor bracket suitable for screens up to 37&quot in size. Mounting hole centres at 75, 100, & 200mm square (suits VESA MIS-D 75 & 100, MIS-F 200). Ideal for mounting information screens or touchscreens in bars, restaurants, hotels etc. |
|
H8189 |
|
- Mounts To: Wall
- Screen Size: 10 to 24"
- Max VESA Dimensions: 100 x 100mm
- Max Weight: 25kg
- Horizontal Adjustment: None
- Vertical Tilt Adjustment: None
- Depth From Mounting Surface: 14mm
- Bracket Dimensions: 121H x 142Wmm
|
|
Fixed LCD monitor bracket suitable for screens up to 24" in size. Mounting hole centres at 75mm & 100mm square (suits VESA MIS-D 75 & 100). Ideal for mounting information screens or touchscreens in bars, restaurants, hotels etc. |
|
P1894 |
|
- Length: 1m
- Output: 5V 2.1A
- Colour: Blue
- Adjustable Length: Retractable lead design, pull from both sides
- Light weight
- Portable
|
|
Are you tired of searching around for your charging cable late at night or just want a USB Lead thats a little bit more interesting? Well this is the lead for you. |
|
W3110 ROHS
|
|
- Outside diameter: ≈9.5mm
- Video shielding size: 16/6/0.11
- 75Ω video conductor size: 30/0.11
- Video conductor area / gauge: 0.29mm2 (23AWG)
- Audio size: 20/0.11
- Audio shielding size: 32/0.12
- Audio conductor area / gauge: 0.19mm2 (24AWG)
- Roll Size: 100m
|
|
Low loss stereo audio cable with central video transmission cable. Twin shielded with copper braid and mylar foil. |
|
A3832 |
|
|
|
Ideal for use in educational or boardroom environments, this handy converter box provides connection for devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
|
A3224 |
|
|
|
An ideal solution for pubs, clubs and venues, this HDMI extender system allows a single HDMI source to be shared across multiple screens located up to 30m away with Cat5e and 50m with Cat6. |
|
C9046 |
|
- Excellent noise isolation and comfort for long periods of use.
- USB powered
- Soft ear cushions
- Built-in microphone
- 2m Cable Length
|
|
These on ear headphones are super comfortable, making them ideal for wearing whilst working at a computer. |
|
P1563B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male orange 0.3m - Category 6 |
|
P1564B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Orange 0.5m - Category 6 |
|
P1565B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Orange 1m - Category 6 |
|
P1566B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Orange 2m - Category 6 |
|
P1567B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Orange 3m - Category 6 |
|
P1568B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Orange 5m - Category 6 |
|
L2003
|
|
- Provides crystal clear reception in mobile vehicles
- Housing is completely waterproof
- Constructed from UV resistant ASA plastic for long term durability
- Comes complete with power supply, cables, connectors and fitting instructions
- Easy to assemble
|
|
This outdoor antenna is a must have for your caravan, RV or boat. It provides crystal clear reception in mobile vehicles. |
|
P1575B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Pink 0.3m - Category 6 |
|
P1576B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Pink 0.5m - Category 6 |
|
P1577B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Pink 1m - Category 6 |
|
P1578B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male pink 2m - Category 6 |
|
P1579B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Pink 3m - Category 6 |
|
P1580B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Pink 5m - Category 6 |
|
W7115 |
|
- 305m pull box
- Size: 8 x 1/0.50 24AWG
- Outside Diameter: 6mm
- Conductor Area: 0.20mm2
- Solid copper conductors.
|
|
U/UTP (unshielded twisted pair) network cable. Solid copper conductors. 305m pull box |
|
W2762 ROHS
|
|
- Colour: Pink
- Size: 8 x 1/0.50
- Outside Diameter: 6mm
- Conductor Area: 0.20mm2
- Roll Size: 305m Pull Box
|
|
ACMA approved. Industry standard single conductor UTP (unshielded twisted pair) computer network cable. Supplied in convenient "Pull Box" for easy installation and neat cable storage. Metre marked. Ringpoint trace marked for easy core identification. |
|
S0152 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Standard dual cover wallplate fitted with an S0950 red illuminated press release switch. |
|
P1551B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Purple 0.3m - Category 6 |
|
P1552B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Purple 0.5m - Category 6 |
|
P1553B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Purple 1m - Category 6 |
|
P1554B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Purple 2m - Category 6 |
|
P1555B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Purple 3m - Category 6 |
|
P1556B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Purple 5m - Category 6 |
|
S0155 |
|
- Switch type: SPDT
- Contact rating: 16A @ 250V AC
- Contact resistance: <50mΩ
- Insulation resistance: >100MΩ
- LED: 12VDC
- Electrical life: >50,000 cycles
|
|
Standard dual cover wallplate fitted with an S0921 green LED illuminated momentary pushbutton switch. |
|
S0150 |
|
- Switch Type: Screw terminal SPST
- Contact Rating: 2A @ 36V DC
- Operation Type: Momentary
- Outer Construction: Stainless steel
- LED: 12V AC/DC
- Rating: IP65
- Panel Thickness: 1-10mm
- Cutout Diameter: 19mm
|
|
Standard dual cover wallplate fitted with an S0956 blue illuminated metal momentary pushbutton switch. |
|
P0358 |
|
- RCA Female - RCA Female Adaptor
|
|
RCA Female to RCA Female Adapter. |
|
P0358A NEW
|
|
- RCA Female - RCA Female Adaptor
|
|
RCA Female to RCA Female Adapter. |
|
P0357 ROHS
|
|
|
|
RCA Male to 2 RCA Female Right Angle Adapter. |
|
P0369 ROHS
|
|
|
|
Reliable adaptors for audio and video use. |
|
P0381 ROHS
|
|
|
|
RCA Male to 6.35mm Mono Socket Adapter. |
|
P0379 ROHS
|
|
|
|
RCA Male to 6.35mm Stereo Socket Adapter. |
|
P0356 ROHS
|
|
|
|
RCA to 1 x RCA Skt.
Depth when plugged in: 19mm
Overall dimensions: 32 x 25mm. |
|
A3207 |
|
|
|
Supplied as a pair, these handy bi-directional audio extender allow you to send stereo audio signals over long distances using economical UTP cable (Cat5/5e/6). Ideal for connecting an audio source to an amplifier in another room. Maximum distance 75m. |
|
A3606 NEW
|
|
- General
- System Video Resolution: 4K60; 4K30; 4K24; 1080P60/50/30/24;1080i60/50; 720P/60/50/30 480P
- Audio: Stereo, 44.1KHz
- Wireless standard: IEEE 802.11b/g/n/ac, 2.4G/5GHz, 2T2R
- Latency: About 100ms latency
- HDMI Version: HDMI 2.0 with HDCP2.2
- Platform: supported Any devices that support HDMI Port
- Distance: ≈150m in the clear line of sight
- Receiver
- Interface: HDMI out x1; USB x 2; Type C x1
- LED: Blue LED x 1
- Power supply: DC5V/2.1A
- Power Consumption: About 5W
- Dimension: 154*77.5*21mm
- Weight: 330g
|
|
An additional receiver unit for the Dynalink A3605 4K wireless HDMI sender system. |
|
A3226 |
|
|
|
Receiver for use with the A 3224 HDMI Extender Kit and the A 3225 HDMI Extender Tranceiver. For multiple screens daisy chained from a single signal source use up to 6 tranceivers with a receiver at the very end. |
|
P1819B ROHS
|
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 0.3m - Category 6 |
|
P1641A ROHS
|
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 0.3m |
|
P1820B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 0.5m - Category 6 |
|
P1642A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 0.5m |
|
P1821A ROHS
|
|
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 1m |
|
P1821B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 1m - Category 6 |
|
P1643A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 1m |
|
P1822B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 2m - Category 6 |
|
P1644A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 2m |
|
P1823B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 3m - Category 6 |
|
P1645A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 3m |
|
P1825A ROHS
|
|
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 5m |
|
P1825B |
|
- Fitted with Category 6 compliant RJ plug
- 100% copper conductors
- T568A configuration
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6
- TIA/EIA-568-C.2 Category 6 compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 5m - Category 6 |
|
P1647A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Red 5m |
|
P0243 ROHS
|
|
|
|
Super high-quality metal RCA plugs with gold plated contacts for ultra low connection loss. |
|
P0244 ROHS
|
|
|
|
Super high-quality metal RCA plugs with gold plated contacts for ultra low connection loss. |
|
P1850A |
|
|
|
These covers make it easy to identify your leads once installed in patch panels. |
|
P1851A |
|
|
|
These covers make it easy to identify your leads once installed in patch panels. |
|
PA6201A |
|
|
|
A threaded RCA socket for fitment to a custom AV wallplate. |