|
Description |
Downloads |
Specs |
Ordering |
|
 |
H8188 |
|
- Mounts To: Wall
- Screen Size: 10 to 37"
- Max VESA Dimensions: 200 x 200mm
- Max Weight: 25kg
- Horizontal Adjustment: None
- Vertical Tilt Adjustment: None
- Depth From Mounting Surface: 19mm
- Bracket Dimensions: 235 x 275mm
|
|
Fixed LCD monitor bracket suitable for screens up to 37" in size. Mounting hole centres at 75, 100, & 200mm square (suits VESA MIS-D 75 & 100, MIS-F 200). Ideal for mounting information screens or touchscreens in bars, restaurants, hotels etc. |
 |
P7334B |
|
|
|
HDMI certified. Lifetime warranty. High performance and V2.0 compliant. 18Gbits/s TMDS bandwidth. 48 bit/px deep colour. |
 |
P5925 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Type VGA Plates are fitted with a HD9 female VGA connector. Supplied with two facia covers to suit your decor. |
 |
S0160 |
|
- Switch type: DPDT
- Contact rating: 500mA @ 250V AC 1A @ 24V DC
- Contact resistance: <50mΩ
- Insulation resistance: >100MΩ
- Dialectric strength: 1000V between poles
- Electrical life: >50,000 cycles
- Ingress protection rating: IP65
|
|
Alternate action latches in off position. Rotating the spring loaded actuator clockwise allows circuit to reconnect. |
 |
PA6554 |
|
|
|
Active type. For source equipment that does not support dual mode DisplayPort (DP++). This includes additional chipset to perform required video conversion between source equipment and the display. |
 |
P5968 NEW
|
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead wallplate fitted with USB Type C. Supplied with two facia covers to suit your decor. |
 |
S9249 |
|
|
|
Allows the transmission of a signal from a camera for up to 600m (B+W) or 300m (colour) over standard cat 5 UTP cable. Two units are required to form a link. No power required. Supplied with a single BNC connector for video (RCA - BNC adaptor included) and RCAs for audio. Sold individually. |
 |
P1666A |
|
- Fitted with Category 6a nickel plated shielded compliant RJ plug
- Halogen free jacket
- 500Mhz bandwidth @ 10Gbps
- 100% copper conductors
- T568A configuration
- Suitable for use in PoE applications
- Impedance matched wire and connectors for superior performance
- Durable and flexible outer jacket
- Fully moulded strain-relief boot
- Snag prevention design to reduce plug/socket damage
- ISO/IEC 11801 Category 6A
- TIA/EIA-568-C.2 Category 6A compliant
|
|
8 Pin RJ45 Male to 8 Pin RJ45 Male Black 15m |
 |
C0459 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
4 pin Neutrik Speakon connector mounted horizontally on a dual face wall plate. |
 |
P5952 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA, 3.5mm audio, three RCA connections & USB Type A. Supplied with two facia covers to suit your decor. |
 |
P5954 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA, 3.5mm audio, three RCA connections & USB Type A. Supplied with two facia covers to suit your decor. |
 |
P5961 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HD9 female VGA and three RCA connections. Supplied with two facia covers to suit your decor. |
 |
P6566A |
|
|
|
DVI-D Dual Link Male to Male Lead, 5m. |
 |
P6632A |
|
|
|
Micro HDMI to HDMI Lead, 3m. 4K @ 30Hz Ultra HD Ready. |
 |
PB5970 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HDMI high speed with Ethernet (1.4) connection. Supplied with two facia covers to suit your decor. |
 |
P5930 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with with a HD9 female VGA connector and 3.5mm audio. Supplied with two facia covers to suit your decor. |
 |
P5934 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with with a HD9 female VGA connector and 3.5mm audio. Supplied with two facia covers to suit your decor. |
 |
P5940 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via screw terminals. Supplied with two facia covers to suit your decor. |
 |
P5942 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via back to back plugs. Supplied with two facia covers to suit your decor. |
 |
P5944 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with VGA, 3.5mm audio & USB connector. Rear connections are via back to back plugs. Supplied with two facia covers to suit your decor. |
 |
P5945 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Wallplate fitted with with a HD9 female VGA connector and 3.5mm audio. Supplied with two facia covers to suit your decor. |
 |
P5946 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with VGA, 3.5mm audio & USB Type A. Supplied with two facia covers to suit your decor. |
 |
P6849A |
|
|
|
Plug Connection Type plates are designed for use with premade cables, reducing on-site installation time. No cable termination required! Wallplate fitted with HD9 female VGA connector, USB type A & 3.5mm audio on the front and rear of wallplate. Also fit |
 |
L1044 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Dual 12V DC Merit sockets with protective dust cap. Ideal for use in 4WDs,
Caravans and RV. 6.3mm spade connection. |
 |
P7457 |
|
- Length: 1.5 metres
- Ethernet channel
- Enhanced Audio return channel
- Supports 8K resolutions at 60Hz
- Supports 4K resolutions at 120Hz
- 3D over HDMI®
- 48Gbit/s bandwidth
- HDCP 2.2 compliant
- 30AWG cable guage with fibre wrap shielding
- Auto low latency mode
- Supports HDR
- Supports 48 bit Deep Colour
- Supports Dolby® Digital & DTS®
- Supports Dolby® TrueHDTM & DTS®-HD Master Audio
- Supported resolutions:
- 4K @50/60Hz
- 4K @100/120Hz
- 5K @50/60Hz
- 5K @100/120Hz
- 8K @50/60Hz
|
|
8K HDMI Cable. Supports ethernet, 3D, 8K @ 60Hz & 4K @ 120Hz. |
Dynalink