|
Description |
Downloads |
Specs |
Ordering |
|
|
P0023 ROHS
|
|
- Electrical
- Dielectric strength: 0.5 kVdc
- Insulation resistance: ≥ 1 GΩ
- Rated current: depends on mated connector
- Contact resistance: depends on mated connector
- Mechanical
- Cable: O.D.4 mm
- Insertion force: ≤ 20 N
- Withdrawal force: ≥ 10 N
- Lifetime: 1000 mating cycles
- Material
- Contact plating: Nickel
- Contacts: Brass (CuZn39Pb3)
- Shell: Zinc die cast (ZnAl4Cu1)
- Shell plating: Nickel
- Strain relief: SnCe plated, crimp type
- Insulation: Thermoplastic
- Environmental
- Solderability: Complies with IEC 68-2-20
- Temperature range-25 °C to +70 °C
|
|
High quality Neutrik line jack plug. 4mm cable entry |
|
P0034A |
|
- Electrical
- Dielectric strength: 0.5 kVdc
- Insulation resistance: ≥ 1 GΩ
- Rated current: depends on mated connector
- Contact resistance: depends on mated connector
- Mechanical
- Cable: O.D.4 mm
- Insertion force: ≤ 20 N
- Withdrawal force: ≥ 10 N
- Lifetime: 1000 mating cycles
- Material
- Contact plating: Nickel
- Contacts: Brass (CuZn39Pb3)
- Shell: Zinc diecast (ZnAl4Cu1)
- Shell plating: Nickel
- Strain relief: SnCe plated, crimp type
- Insulation: Thermoplastic
- Environmental
- Solderability: Complies with IEC 68-2-20
- Temperature range: -25 °C to +70 °C
|
|
High quality Neutrik line jack plug. 4mm cable entry rean |
|
P0789 |
|
-
- SpeakOn® or Lockable Speaker Connectors can be wired up in a variety of ways for different applications. Two positive and two negative pins are provided allowing two channels of audio to be passed via a single connector. In single channel applications only +1 and -1 will be connected.
|
|
Heavy duty, robust construction. As used on many professional amplifiers and speaker boxes. Handles up to 30A current and the inline plug can accept up to 8mm cable diameter. Genuine Speak-On connector manufactured by Neutrik. |
|
P0792 ROHS
|
|
|
|
Heavy duty 4 pin connectors as used on professional amplifiers and speaker boxes. Handles up to 30A current. Genuine Speak-On connector manufactured by Neutrik. |
|
P0795 ROHS
|
|
-
- SpeakOn® or Lockable Speaker Connectors can be wired up in a variety of ways for different applications. Two positive and two negative pins are provided allowing two channels of audio to be passed via a single connector. In single channel applications only +1 and -1 will be connected.
|
|
Heavy duty, robust construction. As used on many professional amplifiers and speaker boxes. Handles up to 30A current and the inline plug can accept up to 8mm cable diameter. Genuine Speak-On connector manufactured by Neutrik. |
|
P0795A NEW
|
|
-
- SpeakOn® or Lockable Speaker Connectors can be wired up in a variety of ways for different applications. Two positive and two negative pins are provided allowing two channels of audio to be passed via a single connector. In single channel applications only +1 and -1 will be connected.
|
|
The Neutrik NL4FXX-W-S 4-pole speakON cable connector has a screw terminal assembly and chuck type strain relief for cable diameters 6 to 12 mm. |
|
P0833 ROHS
|
|
|
|
HDMI sockets on both sides of connector for use with pre-made leads. ROHS.
HDMI Version 1.3. Standard 'D' shape housing for easy mounting. |
|
P0840 ROHS
|
|
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Sleek and ergonomic design - valuable and handy
- Rugged zinc die cast shell, long lasting and dependable
- Internal thread on shell is well protected against any damage
|
|
Neutrik 3 Pin Line XLR female connector.
Neutrik connectors are made from rugged diecast aluminium and are designed to be compact yet stand up to the rigours of everyday use. Connector assembly is designed to be as simple as possible, saving you time |
|
P0842 ROHS
|
|
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Sleek and ergonomic design - valuable and handy
- Rugged zinc die cast shell, long lasting and dependable
- Internal thread on shell is well protected against any damage
|
|
Neutrik 3 Pin Line XLR male connector.
Neutrik connectors are made from rugged diecast aluminium and are designed to be compact yet stand up to the rigours of everyday use. Connector assembly is designed to be as simple as possible, saving you time wh |
|
P0850 ROHS
|
|
|
|
Neutrik 3 Pin Chassis XLR female connector.
Neutrik connectors are made from rugged diecast aluminium and are designed to be compact yet stand up to the rigours of everyday use. RF shielding via 3 point contact to shell. Fitted with M3 mounting holes. |
|
P0852 ROHS
|
|
- Robust "D" metal shell
- Standardized D sized 24 mm panel cutout
- Solder cups on 3 - 7 pole version
|
|
Neutrik 3 Pin Chassis XLR male connector.
Neutrik connectors are made from rugged diecast aluminium and are designed to be compact yet stand up to the rigours of everyday use. RF shielding via 3 point contact to shell. Fitted with threaded M3 mounting |
|
P0860 ROHS
|
|
- Extra slim right-angle connector
- 5 selectable cable outlet positions
- Unique cage design of female contact for low contact resistance and high integrity
- Female contact incorporates a solder barrier to prevent solder running into the contact mating area
- Female connector with improved solid metal latch which is larger and easier to handle
- Additional ground spring contacts for better shell ground continuity
- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Sleek and ergonomic design - valuable and handy
|
|
Cable entry angle can be varied 180. Strain relief secures cable from 3 to 6mm. Once connected body extends only 30mm. |
|
P0862 ROHS
|
|
- Extra slim right-angle connector
- 7 selectable cable outlet positions
- Male connector with improved locking recess without "window", more stringent housing increases durability
- Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
- Boot with polyurethane gland gives high protection to cable bending stresses
- Sleek and ergonomic design - valuable and handy
|
|
Cable entry angle can be varied 180. Strain relief secures cable from 3 to 6mm. Once connected body extends only 30mm. |