Chemtools
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Potting Compound Silicon 1kg PCT-7000YH1621 |
|
| Chemtools high quality two component Silicone Potting Compound is specially formulated for potting applications in the Electrical and Electronics industry. | |
 |
PCB Lacquer 1 litreT3087A |
| A premium flexible coating for protecting circuit boards from humidity and other environmental attack. | ||
 |
Chemtools Potting Compound Silicone 200gm ...H1620 |
|
| Chemtools high quality two component Silicone Potting Compound is specially formulated for potting applications in the Electrical and Electronics industry. Chemtools PCT-7000 potting compounds offer good protection against impact damage and because of | |
 |
PCB Cleaner 1 LitreT3070A |
| A premium blend of solvents for general purpose cleaning of circuit boards. Will remove oils, grease, dirt and most resin based fluxes. | ||
 |
3.2mm Brown 7.6m Solder Wick Desoldering B...T1219 |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long. 3.20mm Brown. | ||
 |
2.54mm Blue 7.6m Solder Wick Desoldering B...T1217 |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long. 2.54mm Blue | ||
 |
0.635mm White 7.6m Solder Wick Desoldering...T1211 |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long. | ||
 |
1.27mm Yellow 7.6m Solder Wick Desoldering...T1213 |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long. | ||
 |
1.91mm Green 7.6m Solder Wick Desoldering ...T1215 |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 7.6 metres long. 1.91mm Green | ||
 |
Conformal Coating Aerosol 400gT3175 |
| Provides a clear tough high gloss finish to provide PCBs with a high level of environmental protection form dust, mould, chemicals and physical abrasion. | ||
 |
150g Tube Silicone Heatsink Thermal Paste ...H1610A |
|
| High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer. 150g Tube | |
 |
Vio-Flux High Activity Liquid Flux 250mlH1651 NEW |
| CT-VF-250ML Vioflux is a general purpose acid based flux which is formulated for use with Stainless Steel, Monel, High-Chrome Alloys, Inconel, Nickel, Copper, Brass, Ferrous Alloys, soft metals and many more. | ||
 |
Label Remover Solvent Aerosol 300gT3177 |
| Penetrates quickly and dissolves today's high-strength adhesives, glues, and gums. Can also be used to remove grease, oil, gum, crayon and tar-like residues. Pleasant citrus fragrance. 300gm aerosol. | ||
 |
Low Odour Adhesive Glue 8460 20gmT3019 |
| Chemtools 8460 Cyanoacrylate Adhesive has excellent resistance to peel and shock loads. It is specially formulated for adhering various rubbers, metals, magnets, and plastics for use in difficult environments. It''s ideal for bonding speaker assemblies, electronic and electrical components, computer assemblies, disk drives, and automotive parts. W | ||
 |
Clearcote Circuit Board LacquerT3176 |
|
| This circuit board lacquer is a general purpose resin coating for printed circuit boards. | |
 |
Tip Tinner High Strength 20gmT1328 |
| This product is used when soldering tip plating has oxidised and the whole tip has turned black making the tip unusable. | ||
 |
DEOX R30 Non-Stick Dry PTFE Lubricant 300gT3164 |
|
| Chemtools DEOX R30 non-stick dry PTFE lubricant is a Teflon® based spray that acts as a powerful dry lubricant. | |
 |
Rapidstick™ Multi-Surface Adhesive Spray...T3174 |
|
| Rapidstick™ Multi-Surface Adhesive Spray is an advanced and versatile rubber tack for adhering a variety of materials in applications ranging from light to heavy duty. | |
 |
Electronic Cleaning Solvent Aerosol 230gT3150 |
|
| Ideal for cleaning delicate electronic-electrical assemblies, video and tape heads etc. Will not affect paints, plastics, or component markings. - Non corrosive - low toxicity - Leaves no residue - Fast drying | |
 |
General Purpose Flux Remover Aerosol 300gT3140 |
| Ideal for cleaning flux residue from recently soldered PCB's and electronic components. Suitable for use with leaded and lead-free soldering processes. Formulated to clean rosin, non-rosin, no clean fluxes and ionic contamination. Evaporates quickly leavi | ||
 |
DEOX R60 Heavy Duty Silicone Spray 300gT3120A NEW |
| DEOX R60 Heavy Duty Silicone Spray is a high-performance, water-displacing light lubricant designed to offer superior corrosion resistance against extreme weather, temperature conditions, salt spray, and some chemical exposures. 300g. | ||
 |
SAC305 Lead Free Solder Paste 15g SyringeH1645 |
|
| NC257-2 has been developed to offer extremely broad process windows for printing, wetting and pin-probe testing. | |
 |
White Lithium GreaseT3122A NEW |
|
| A long lasting heavy duty lubricant designed for bearings, sliding mechanisms, battery terminals, chains, gears and other moving parts. | |
 |
PCB Cleaner Solvent Aerosol 300gT3155 |
|
| Fast drying heavy duty formula is ideal for removing encrusted solder flux. It will quickly rinse dirt, moisture, dust and corrosion from most electronic circuit boards. - Fast drying - Non corrosive - Low odour | |
 |
PCB Wash / Ultrasonic Cleaner Solution 1 L...T3180 |
|
| This PCB flux remover & ultrasonic cleaner solution provides an extremely clean and contaminant free surface. It is suitable for both static and ultrasonic cleaner use. Water based | |
 |
Contact Cleaning Aerosol 350gT3160 |
|
| Ideal for cleaning all non-arcing contacts, edge connectors and switch mechanisms. Safe on most plastics. Fantastic for use on noisy potentiometers.350g - Non Ozone depleting - Safe on most plastics - Stops corrosion - Ideal for PCBs, tape heads, bu | |
 |
Ammonium Persulphate 500gmH0802A |
| A clean, safe to use etchant, white powder, mix with water 1:5 ratio. | ||
 |
Ground Zero Anti-Static Glass & Surface Cl...T3056 NEW |
| Specially formulated water-based, non-abrasive multi-application cleaner which sanitises and removes tough dirt, dust, grease, lint, oil, toner, carbon, fingerprints, and smudges from multiple surfaces. | ||
 |
50g Silicone Dielectric GreaseT3127 |
| An electrically insulating grease which does not breakdown when high voltages are applied. Often applied to connectors and rubber gaskets for lubricating and sealing parts of the connector without arcing. 50g | ||
 |
Isopropyl Alcohol Aerosol 390mlT3170 |
| Isopropyl alcohol can be used as a universal cleaner for electronics equipment. Ideal for removing dust, buildup and marks on casings etc. | ||
 |
No Clean Solder Flux Gel/Paste Syringe 10CCH1650A |
|
| NC254 Paste Flux is a mildly activated, resin-based formulation developed to offer a broad process window and pin-probable residues. | |
 |
Ferric Chloride Copper Etchant 500mLH0800 |
| Copper etchant. Supplied in 500mL bottle, premixed for easy of use. | ||
 |
Surface Insensitive Adhesive Glue 8401 20gmT3016 |
| Chemtools 8401 is low viscosity combined with fast cure speed, surface insensitive cyanoacrylate adhesive (CA). It is specifically formulated to bond difficult surfaces with high industrial strength. | ||
 |
Adhesive Glue 8406 20gmT3018 |
| Chemtools 8406 is low viscosity combined with fast cure speed, surface insensitive cyanoacrylate adhesive (CA). It is specifically formulated to bond difficult surfaces with high industrial strength. | ||
 |
PCB Cleaner Aerosol 175gT3069A |
| A premium blend of solvents for general purpose cleaning of circuit boards. Will remove oils, grease, dirt and most resin based fluxes. | ||
 |
Electronic Cleaning Solvent Aerosol 175gT3066A |
| Ideal for cleaning delicate electronic-electrical assemblies, video and tape heads etc. Will not affect paints, plastics, or component markings. | ||
 |
Contact Cleaning Lube Aerosol 175gT3061A |
|
| Quickly penetrates and flushes away light oils, greases and carbon deposits from electrical and electronic equipment. | |
 |
Threadlocker 8243 10mlT3117 |
| Removable general-purpose threadlocking adhesive. Suited for fasteners between 6-19mm. Tolerant of oil and other contamination. Protects threads from rust and corrosion. Suitable for stainless steel fasteners. 10ml. | ||
 |
Sn63 Pb37 Leaded Solder Paste 15g SyringeH1640 |
|
| NC254 has been developed to offer extremely broad process windows for printing, wetting and pin probe testing. | |
 |
50g Heatsink Thermal Paste Compound SyringeH1615A |
|
| High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer. 50g Syringe | |
 |
Isopropyl Alcohol 250mlT3035 |
| Isopropyl alcohol can be used as a universal cleaner for electronics equipment. Ideal for removing dust, buildup and marks on casings etc. As well as being a handy way to clean PCB surfaces when servicing. | ||
 |
No Clean Solder Flux Pen 12mlT1927 |
|
| No Clean Solder Flux Pen 12ml | |
 |
50g Carbon Conductive GreaseH1630 |
|
| This carbon conductive grease can tolerate high temperatures (200°c) and keep electrically conductive metal free from rust & corrosion. | |
 |
3.2mm Brown 1.5m Solder Wick Desoldering B...T1218A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 3.20mm Brown. | ||
 |
2.54mm Blue 1.5m Solder Wick Desoldering B...T1216A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 2.54mm Blue | ||
 |
1.91mm Green 1.5m Solder Wick Desoldering ...T1214A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 1.91mm Green | ||
 |
0.635mm White 1.5m Solder Wick Desoldering...T1210A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 0.635mm White | ||
 |
1.27mm Yellow 1.5m Solder Wick Desoldering...T1212A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 1.27mm Yellow | ||
 |
10g Tube Silicone Heatsink Thermal Paste C...H1600A |
|
| High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer. 10g Tube |
All prices include GST