Chemtools
| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
Contact Cleaning Aerosol 350gT3160 |
|
| Ideal for cleaning all non-arcing contacts, edge connectors and switch mechanisms. Safe on most plastics. Fantastic for use on noisy potentiometers.350g - Non Ozone depleting - Safe on most plastics - Stops corrosion - Ideal for PCBs, tape heads, bu | |
 |
Ammonium Persulphate 500gmH0802A |
| A clean, safe to use etchant, white powder, mix with water 1:5 ratio. | ||
 |
Ground Zero Anti-Static Glass & Surface Cl...T3056 NEW |
| Specially formulated water-based, non-abrasive multi-application cleaner which sanitises and removes tough dirt, dust, grease, lint, oil, toner, carbon, fingerprints, and smudges from multiple surfaces. | ||
 |
50g Silicone Dielectric GreaseT3127 |
| An electrically insulating grease which does not breakdown when high voltages are applied. Often applied to connectors and rubber gaskets for lubricating and sealing parts of the connector without arcing. 50g | ||
 |
Isopropyl Alcohol Aerosol 390mlT3170 |
| Isopropyl alcohol can be used as a universal cleaner for electronics equipment. Ideal for removing dust, buildup and marks on casings etc. | ||
 |
No Clean Solder Flux Gel/Paste Syringe 10CCH1650A |
|
| NC254 Paste Flux is a mildly activated, resin-based formulation developed to offer a broad process window and pin-probable residues. | |
 |
Ferric Chloride Copper Etchant 500mLH0800 |
| Copper etchant. Supplied in 500mL bottle, premixed for easy of use. | ||
 |
Surface Insensitive Adhesive Glue 8401 20gmT3016 |
| Chemtools 8401 is low viscosity combined with fast cure speed, surface insensitive cyanoacrylate adhesive (CA). It is specifically formulated to bond difficult surfaces with high industrial strength. | ||
 |
Adhesive Glue 8406 20gmT3018 |
| Chemtools 8406 is low viscosity combined with fast cure speed, surface insensitive cyanoacrylate adhesive (CA). It is specifically formulated to bond difficult surfaces with high industrial strength. | ||
 |
PCB Cleaner Aerosol 175gT3069A |
| A premium blend of solvents for general purpose cleaning of circuit boards. Will remove oils, grease, dirt and most resin based fluxes. | ||
 |
Electronic Cleaning Solvent Aerosol 175gT3066A |
| Ideal for cleaning delicate electronic-electrical assemblies, video and tape heads etc. Will not affect paints, plastics, or component markings. | ||
 |
Contact Cleaning Lube Aerosol 175gT3061A |
|
| Quickly penetrates and flushes away light oils, greases and carbon deposits from electrical and electronic equipment. | |
 |
Threadlocker 8243 10mlT3117 |
| Removable general-purpose threadlocking adhesive. Suited for fasteners between 6-19mm. Tolerant of oil and other contamination. Protects threads from rust and corrosion. Suitable for stainless steel fasteners. 10ml. | ||
 |
Sn63 Pb37 Leaded Solder Paste 15g SyringeH1640 |
|
| NC254 has been developed to offer extremely broad process windows for printing, wetting and pin probe testing. | |
 |
50g Heatsink Thermal Paste Compound SyringeH1615A |
|
| High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer. 50g Syringe | |
 |
Isopropyl Alcohol 250mlT3035 |
| Isopropyl alcohol can be used as a universal cleaner for electronics equipment. Ideal for removing dust, buildup and marks on casings etc. As well as being a handy way to clean PCB surfaces when servicing. | ||
 |
No Clean Solder Flux Pen 12mlT1927 |
|
| No Clean Solder Flux Pen 12ml | |
 |
50g Carbon Conductive GreaseH1630 |
|
| This carbon conductive grease can tolerate high temperatures (200°c) and keep electrically conductive metal free from rust & corrosion. | |
 |
3.2mm Brown 1.5m Solder Wick Desoldering B...T1218A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 3.20mm Brown. | ||
 |
2.54mm Blue 1.5m Solder Wick Desoldering B...T1216A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 2.54mm Blue | ||
 |
1.91mm Green 1.5m Solder Wick Desoldering ...T1214A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 1.91mm Green | ||
 |
0.635mm White 1.5m Solder Wick Desoldering...T1210A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 0.635mm White | ||
 |
1.27mm Yellow 1.5m Solder Wick Desoldering...T1212A |
| Apply wick to joint and heat with soldering iron and the capillary action of the braid draws the solder off. All approximately 1.5 metres long. 1.27mm Yellow | ||
 |
10g Tube Silicone Heatsink Thermal Paste C...H1600A |
|
| High quality heat transfer thermal paste compound. Used to thermally connect a device to a heatsink to aid heat transfer. 10g Tube |