|
Description |
Downloads |
Specs |
Ordering |
|
![W0987 Green/Yellow (Earth) 20mm Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W0987.jpg) |
W0987 ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
This heat shrink is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work. |
![W0856A 5mm x 1m length Fibreglass Sheathing](https://images.altronics.com.au/thb/w/W0856.jpg) |
W0856A |
|
|
|
Provides heat (up to 450C) protection for cabling. Ideal for automotive or industrial use.
5mm diameter, 1m length. |
![W4100 8AWG Red 78A Power Cable](https://images.altronics.com.au/thb/w/W4100.jpg) |
W4100 ROHS
|
|
- Conductor
- Material: Oxygen Free Copper
- AWG: 7.12mm2 × 1C (8AWG)
- Construction: 630/0.12mm±0.008mm
- Stranded Diameter: 4.01mm
- Jacket
- Material: PVC
- Average Thickness: 1.25mm
- Cable Diameter: 6.5±0.1mm
- Jacket Colour: Red Transparent
- Physical and Electrical Characteristics
- Rated Voltage: 300V DC
- Rated Temperature: 105°C
- Rated Current: 78 Amps
- Maximum DC Resistance: 0.00259M Ω
- Tensile Strength: ≥10.3 Mpa (Insulation and Jacket)
- Elongation: ≥100% upward (Insulation)
- Dielectric Strength: 2kV/min (Insulation in water)
|
|
High power handling cable for distributing power. |
![W4102 8AWG 78A Black Power Cable](https://images.altronics.com.au/thb/w/W4102.jpg) |
W4102 ROHS
|
|
- Conductor
- Material: Oxygen Free Copper
- AWG: 7.12mm2 × 1C (8AWG)
- Construction: 630/0.12mm±0.008mm
- Stranded Diameter: 4.01mm
- Jacket
- Material: PVC
- Average Thickness: 1.25mm
- Cable Diameter: 6.5±0.1mm
- Jacket Colour: Black Transparent
- Physical and Electrical Characteristics
- Rated Voltage: 300V DC
- Rated Temperature: 105°C
- Rated Current: 78 Amps
- Maximum DC Resistance: 0.00259M Ω
- Tensile Strength: ≥10.3 Mpa (Insulation and Jacket)
- Elongation: ≥100% upward (Insulation)
- Dielectric Strength: 2kV/min (Insulation in water)
|
|
High power handling cable for distributing power. |
![W2199 13AWG Black Double Insulated Speaker Cable](https://images.altronics.com.au/thb/w/W2199.jpg) |
W2199 |
|
- Size: 2 x 35/0.30
- Voltage rating: 300V AC
- Outside diameter: 9mm
- Conductor area: 2.5mm2
- Conductor gauge: 13AWG
- Roll Size: 100m
|
|
Double insulated with soft sheath.
Size: 2 x 35/0.30
Voltage rating: 300V AC @ 22A
Outside diameter: ≈9mm
Conductor: 2.5mm2 (≈13AWG)
Resistance: 0.0075Ω/m @ 20°C
Temperature rating: 75°C |
![W2225 RG316/U 50 Ohm Low Loss Coaxial Cable](https://images.altronics.com.au/thb/w/W2225.jpg) |
W2225 |
|
- Outside diameter: ≈2.53mm
- Shielding size: 80/0.10
- Conductor: 7/0.17
- Conductor area: 0.16mm2
- Reel size: 100m
|
|
Used in IT & comms equipment, wifi antenna connection etc. |
![W2145 12AWG (OFC) Oxygen Free Speaker Cable](https://images.altronics.com.au/thb/w/W2145.jpg) |
W2145 ROHS
|
|
- Size: 2 x 315/0.12
- Dimensions: 12 x 6.0mm
- Conductor Area: 3.56mm2
- Conductor Gauge: 12AWG
- Temperature Rating: 90°C
- Roll Size: 50m
|
|
Oxygen free high power speaker wire ideal for hi-fi systems. |
![W2146 12AWG (OFC) Oxygen Free Speaker Cable](https://images.altronics.com.au/thb/w/W2145.jpg) |
W2146 ROHS
|
|
- Size: 2 x 315/0.12
- Dimensions: 12 x 6.0mm
- Conductor Area: 3.56mm2
- Conductor Gauge: 12AWG
- Temperature Rating: 90
|
|
Oxygen free high power speaker wire ideal for hi-fi systems. |
![W4222 19AWG Black 7 Core Trailer Cable](https://images.altronics.com.au/thb/w/W4222.jpg) |
W4222 |
|
- Size: 7 x 9/0.30
- Current Rating: 6A
- Outside Diameter: 7.4mm
- Conductor Area: 0.64mm2
- Conductor Gauge: 19AWG
- Temperature Rating: 90°C
- Voltage Rating: AC 50V / DC 120V to AS/NZS 3000:2000
- Insulation: V90 to AS/NZS 3808:2000
- Sheath Colour: Black (V90 to AS/NZS 3808:2000)
- Roll Size: 100m
|
|
7 core trailer cable for DC power wiring in automotive applications. |
![W2988 Flat Dual Conductor Speaker Installation Tape](https://images.altronics.com.au/thb/w/W2988.jpg) |
W2988 |
|
|
|
A flat copper tape ideal for running speaker cable underneath carpets. Can be folded to run around corners.
|
![W0995A Black 10mm Adhesive Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W0995A.jpg) |
W0995A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Colour: Black
Nominal : 10mm (15.5mm across when flattened)
Ø when shrunk: 5mm
Glue backed heatshrink is ideal for minimising cable movement and reducing moisture ingress into cable joins and plugs. |
![W1003 Red 10mm Adhesive Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W1003.jpg) |
W1003 |
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Colour: Red
Nominal Ø: 10mm (15.5mm across when flattened) Ø when shrunk: 5mm
Glue backed heatshrink is ideal for minimising cable movement and reducing moisture ingress into cable joins and plugs. |
![W4920 RG213/U 50 Ohm Low Loss Coaxial Cable](https://images.altronics.com.au/thb/w/W4920.jpg) |
W4920 ROHS
|
|
- Outside diameter: 10.2mm
- Shielding size: 168/0.16
- Braid coverage: 90% + aluminium mylar foil
- Conductor construction: Bare copper
- Conductor size: 13 AWG
- Roll Size: 100m
|
|
As used in UHF mic installations for long distance aerial connection. |
![W2228 RF400 50 Ohm Low Loss Coaxial Cable](https://images.altronics.com.au/thb/w/W2228.jpg) |
W2228 |
|
- Insulated by sign pressure, gas injected foamed dielectric
- Provide supper low attenuation loss in wider frequency range
- Maintain low loss and stable VSWR in high frequency against aging
- Suitable for Radio Transmission, Amateur Radio and Base Radio Antenna Station
|
|
A low loss cable for Ham, CB and marine communications. |
![W2640 40 Wire IDC Cable](https://images.altronics.com.au/thb/w/W2640.jpg) |
W2640 ROHS
|
|
- Conductor
- Size: 28AWG (0.89mm2)
- Material: tinned copper
- Construction: 7/0.127mm
- Insulation
- Material: Fire resistant PVC 105ºC
- Average thickness: 0.26mm
- Minimum thickness: 0.18mm
- Diameter: 40 x 1.29±0.15mm
- Colour: grey (edge with red trace)
- Electric
- Conductor resistance: max. 237Ω/km, 20ºC
- Insulation resistance: min. 100MΩ/km, 20ºC
- Capacitance: 60pF/m (G-S-G), 42pF/m (G-S)
- Inductance: 1.45µH/m
- Impedance: 100±10Ω (G-S-G)
- Propagation delay time 5.0ns/m
- Spark test 2500V
- Dielectric strength: min. 2kV in 1 minute
- Rating voltage: max. 300V
- Rating temperature: -20ºC to 105ºC
- Standard: UL2651/CSA C22.2 No. 210.2
|
|
40 Way. Grey insulation. |
![W7016 78/0.30 6mm 62A Solar Cable](https://images.altronics.com.au/thb/w/W7025.jpg) |
W7016 |
|
- Size: 1 x 78/0.30
- Rating: 62A
- Outside diameter: 6.5mm
- Rated voltage: 0.6kV AC, 1.8kV DC
- Conductor: 6.0mm2 (9AWG)
- Temperature rating: -40 to 90°C
|
|
Designed for use in solar panel systems installations. UV stabilised all weather, halogen free, double insulated construction. Super tough outer sheath impervious to oils & grease. |
![W4216A 8AWG 90A Red Power Cable](https://images.altronics.com.au/thb/w/W4216A.jpg) |
W4216A |
|
- Conductor
- Material: Bare Copper
- AWG: 8.41mm2 × 1C (8AWG)
- Construction: 119/0.30mm±0.01mm
- Stranded Diameter: 4.36mm
- Jacket
- Material: PVC
- Average Thickness: 0.82mm
- Cable Diameter: 6.0±0.15mm
- Jacket Colour: Inside White, Outside Red
- Physical and Electrical Characteristics
- Rated Voltage: 300V DC
- Rated Temperature: 90°C
- Rated Current: 90 Amps
- Maximum DC Resistance: 0.00220M Ω
- Tensile Strength: ≥10.3 Mpa (Insulation and Jacket)
- Elongation: ≥100% upward (Insulation)
- Dielectric Strength: 2kV/min (Insulation in water)
|
|
High current capacity for automotive, 4WD, wiring etc. 90A Rated. |
![W4218A 8AWG 90A Black Power Cable](https://images.altronics.com.au/thb/w/W4218A.jpg) |
W4218A |
|
- Conductor
- Material: Bare Copper
- AWG: 8.41mm2 × 1C (8AWG)
- Construction: 119/0.30mm±0.01mm
- Stranded Diameter: 4.36mm
- Jacket
- Material: PVC
- Average Thickness: 0.82mm
- Cable Diameter: 6.0±0.15mm
- Jacket Colour: Red Transparent
- Physical and Electrical Characteristics
- Rated Voltage: 300V DC
- Rated Temperature: 90°C
- Rated Current: 90 Amps
- Maximum DC Resistance: 0.00220M Ω
- Tensile Strength: ≥10.3 Mpa (Insulation and Jacket)
- Elongation: ≥100% upward (Insulation)
- Dielectric Strength: 2kV/min (Insulation in water)
|
|
High current capacity for automotive, 4WD, wiring etc. 90A rated. |
![W0996A Black 13mm Adhesive Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W0992A.jpg) |
W0996A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Colour: Black
Nominal : 13mm (20.5mm across when flattened)
Ø when shrunk: 6.5mm
Glue backed heatshrink is ideal for minimising cable movement and reducing moisture ingress into cable joins and plugs. |
![W1004 Red 13mm Adhesive Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W1004.jpg) |
W1004 |
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Colour: Red
Nominal Ø: 13mm (20.5mm across when flattened) Ø when shrunk: 6.5mm
Glue backed heatshrink is ideal for minimising cable movement and reducing moisture ingress into cable joins and plugs. |
![W2524 24 Wire Rainbow Ribbon Cable](https://images.altronics.com.au/thb/w/W2524.jpg) |
W2524 ROHS
|
|
- 1.27mm Pitch.
- Conductors 10 x 0.12mm.
- 30m Roll
|
|
1.27mm Pitch.
Conductors 10 x 0.12mm.
30m Roll |
![W8000 287/0.30 Red 160A 300mm Power Cable](https://images.altronics.com.au/thb/w/W8000.jpg) |
W8000 |
|
- Size: 287/0.30
- Max current rating: 160A
- Outside diameter: ≈8.15mm
- Conductor: 20.25mm2 (≈4AWG)
- OFHC Max dc Res. at 20°C: 0.92mΩ/m
|
|
High current capacity suitable for connection between battery banks and inverters. |
![W8001 287/0.30 Black 160A 300mm Power Cable](https://images.altronics.com.au/thb/w/W8001.jpg) |
W8001 |
|
- Size: 287/0.30
- Max current rating: 160A
- Outside diameter: ≈8.15mm
- Conductor: 20.25mm2 (≈4AWG)
- OFHC Max dc Res. at 20°C: 0.92mΩ/m
|
|
High current capacity suitable for connection between battery banks and inverters. |
![W4223 16AWG Black 7 Core 10A Trailer Cable](https://images.altronics.com.au/thb/w/W4222.jpg) |
W4223 NEW
|
|
- Size: 16 x 9/0.30
- Current Rating: 10A
- Outside Diameter: 8.4mm
- Conductor Area: 1.13mm2
- Conductor Gauge: 16AWG
- Temperature Rating: 90°C
- Voltage Rating: AC 50V / DC 120V to AS/NZS 3000:2000
- Insulation: V90 to AS/NZS 3808:2000
- Sheath Colour: Black (V90 to AS/NZS 3808:2000)
- Roll Size: 100m
|
|
7 core 10A high current trailer cable for DC power wiring in automotive applications. |
![W4158 10AWG Heavy Duty Automotive Black Figure 8 Cable](https://images.altronics.com.au/thb/w/W4158.jpg) |
W4158 ROHS
|
|
- Size: 2 x 85/0/30
- Voltage Rating: 300V AC
- Current Rating: 28Amps
- Outside Dimensions: ≈6.4 x 10.8mm
- Conductor Area: 6.0mm2
- Conductor Gauge: ≈10AWG
- Temperature Rating: 75°C
- Roll Size: 100m
|
|
Double PVC insulated twin. Separate conductors with non-bonded sheath. |