|
Description |
Downloads |
Specs |
Ordering |
|
 |
W0924A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
This heat shrink is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work. |
 |
W0724 |
|
- Nominal Ø: 6mm
- When Shrunk Ø: 3mm
- Reel Size: 5m
- Temperature Rating: -55ºC to +125ºC
- Shrink Temperature: 70ºC to 110ºC
- Voltage Rating: 600V
|
|
Nominal: 6mm, when shrunk: 3mm
Suitable for insulation, colour coding, strain relief and protection in electrical and electronic applications. |
 |
W2227 |
|
- Insulated by sign pressure, gas injected foamed dielectric
- Provide supper low attenuation loss in wider frequency range
- Maintain low loss and stable VSWR in high frequency against aging
- Suitable for Radio Transmission, Amateur Radio and Base Radio Antenna Station
|
|
Also known as LMR-200 or LL195 cable. |
 |
W2228 |
|
- Insulated by sign pressure, gas injected foamed dielectric
- Provide supper low attenuation loss in wider frequency range
- Maintain low loss and stable VSWR in high frequency against aging
- Suitable for Radio Transmission, Amateur Radio and Base Radio Antenna Station
|
|
A low loss cable for Ham, CB and marine communications. |
 |
W4991 |
|
- Outside diameter: ≈10.3mm
- Shielding size: 16X6/0.16MM
- Braid Coverage: 60% aluminium mylar foil
- Conductor construction: Bare Copper
- Conductor: 1.6mm2 (≈14AWG)
- Temperature rating: 60°C
|
|
Outside diameter:..≈10.3mm
Shielding size: 16X6/0.16MM
|
 |
W4920 ROHS
|
|
- Outside diameter: 10.2mm
- Shielding size: 168/0.16
- Braid coverage: 90% + aluminium mylar foil
- Conductor construction: Bare copper
- Conductor size: 13 AWG
- Roll Size: 100m
|
|
As used in UHF mic installations for long distance aerial connection. |
 |
W2225 |
|
- Outside diameter: ≈2.53mm
- Shielding size: 80/0.10
- Conductor: 7/0.17
- Conductor area: 0.16mm2
- Reel size: 100m
|
|
Used in IT & comms equipment, wifi antenna connection etc. |
 |
W2230 ROHS
|
|
- - Insulated by sign pressure, gas injected foamed dielectric
- - Provide supper low attenuation loss in wider frequency range
- - Maintain low loss and stable VSWR in high frequency against aging
- - Suitable for Radio Transmission, Amateur Radio and Base Radio Antenna Station
|
|
Military MIL-C-17 standard. RG58C/U |
 |
W2229 |
|
- Size: 16/7/0.127
- Braid Coverage: 95%
- Centre Conductor
- Construction: Tinned Copper
- Size: 1/0.80
- Outside Diameter: 4.95mm
- Conductor Area: 0.51mm2
- Loss @ 100MHz: 17.4dB/100m
- Roll Size: 100m
|
|
Military MIL-C-17 standard. RG58C/U |
 |
W2231 ROHS
|
|
- Shielding
- Size: 64/0.12
- Coverage: 95%
- Size: 1/0.81
- Outside Diameter: 6mm
- Conductor Area: 0.51mm2
- Loss @ 100MHz: 8.4dB/100m
- Roll Size: 100m
|
|
Used for video surveillance in home or commerical installations. |
|
W2232 ROHS
|
|
- Shielding
- Size: 64/0.12
- Coverage: 95%
- Size: 1/0.81
- Outside Diameter: 6mm
- Conductor Area: 0.51mm2
- Loss @ 100MHz: 8.4dB/100m
- Roll Size: 300m
|
|
Used for video surveillance in home or commerical installations. |
 |
W2234 ROHS
|
|
- Shielding Size: 16/6/0.12
- Braid Coverage: 70%
- Centre Conductor Construction: Copper Clad Steel
- Size: 1/0.584
- Outside Diameter: 6.15mm
- Conductor Area: 0.27mm2
- Loss @ 100MHz: 13.8dB/100m
- Roll Size: 30m
|
|
Suitable for domestic television installations with short to medium cable runs. Now available in convenient 30m rolls. |
 |
W2235 ROHS
|
|
- Shielding Size: 16/6/0.12
- Braid Coverage: 70%
- Centre Conductor Construction: Copper Clad Steel
- Size: 1/0.584
- Outside Diameter: 6.15mm
- Conductor Area: 0.27mm2
- Loss @ 100MHz: 13.8dB/100m
- Roll Size: 100m
|
|
Ideal for home television outlets. |
 |
W2239 ROHS
|
|
- Shielding
- Size: 16/7/0.16
- Braid Coverage: 95%
- Centre Conductor
- Construction: Copper Clad Steel
- Size: 1/0.584
- Outside Diameter: 6.15mm
- Conductor Area: 0.27mm2
- Loss @ 100MHz: 13.8dB/100m
- Roll Size: 100m
|
|
Military MIL-C-17 standard. RG59B/U. Low interference, high quality 95% coverage shielding. Recommend for commercial applications requiring long cable runs. |
 |
W2240 ROHS
|
|
- Shielding
- Size: 16/7/0.16
- Braid Coverage: 95%
- Centre Conductor
- Construction: Copper Clad Steel
- Size: 1/0.584
- Outside Diameter: 6.15mm
- Conductor Area: 0.27mm2
- Loss @ 100MHz: 13.8dB/100m
- Roll Size: 300m
|
|
Military MIL-C-17 standard. RG59B/U. Low interference, high quality 95% coverage shielding. Recommend for commercial applications requiring long cable runs. |
 |
W2247 ROHS
|
|
- Shielding
- Size: 1 x 64/0.16, 1x 48/0.16
- Braid Coverage: > 95%
- Centre Conductor
- Construction: Copper Clad Steel
- Size: 1/1.02
- Outside Diameter: 7.4mm
- Conductor Area: 0.82mm2
- Loss @ 100MHz: 7.71dB/100m
- Roll Size: 100m
|
|
Suitable for; Digital TV, Pay-TV, MATV. It features very low loss ratings due to its quad screen shielding and is the standard for commercial video signal distribution. |
|
W2246 ROHS
|
|
- Shielding
- Size: 1 x 64/0.16, 1x 48/0.16
- Braid Coverage: > 95%
- Centre Conductor
- Construction: Copper Clad Steel
- Size: 1/1.02
- Outside Diameter: 7.4mm
- Conductor Area: 0.82mm2
- Loss @ 100MHz: 7.71dB/100m
- Roll Size: 30m
|
|
Suitable for Digital TV, MATV. Very low loss ratings due to its quad screen shielding. |
 |
W5012 |
|
- Foxtel Approved - Made to stringent high quality standards
- Jonsa-Ellies Part Number: CRG6UBQ
- Approval No: F10129
- Centre Conductor
- Copper clad steel wire: 1/1.02
- Diametre: 1.02mm (AWG18)
- Dielectric
- Material: Foamed HD Polyethylene
- Diameter: 4.57mm
- Laminating Shielding Tape
- Material: Bonded laminated aluminium foil
- Thickness: 60 microns
- Core Diameter
- LST + Dielectric: 4.78mm
- Inner Braid
- Material: Aluminium alloy wires
- Minimum braid coverage: 60%
- Laminating Shielding Tape
- Material: Laminated aluminium foil
- Thickness: 60 microns
- Outer Braid
- Material: Aluminium alloy wires
- Minimum braid coverage: 40%
- Sheath
- Material: PVC
- Thickness: 0.86mm
- Overall diameter: 7.54mm
Cross Section
|
|
Foxtel Approved - Made to stringent high quality standards
Jonsa-Ellies Part Number: CRG6UBQ
Approval No: F10129
Centre Conductor
Copper clad steel wire: 1/1.02
Diametre: 1.02mm (AWG18)
Dielectric
Material: Foamed HD Polyethylene |
|
W5004A |
|
- Foxtel Approved - Made to stringent high quality standards
- Jonsa-Ellies Part Number: CRG6UBQ
- Approval No: F10129
- Centre Conductor
- Copper clad steel wire: 1/1.02
- Diametre: 1.02mm (AWG18)
- Dielectric
- Material: Foamed HD Polyethylene
- Diameter: 4.57mm
- Laminating Shielding Tape
- Material: Bonded laminated aluminium foil
- Thickness: 60 microns
- Core Diameter
- LST + Dielectric: 4.78mm
- Inner Braid
- Material: Aluminium alloy wires
- Minimum braid coverage: 60%
- Laminating Shielding Tape
- Material: Laminated aluminium foil
- Thickness: 60 microns
- Outer Braid
- Material: Aluminium alloy wires
- Minimum braid coverage: 40%
- Sheath
- Material: PVC
- Thickness: 0.86mm
- Overall diameter: 7.54mm
|
|
Foxtel & Austar Approved - Made to stringent high quality standards
Outside diameter: 7.54mm
|
 |
W3035 ROHS
|
|
- Conductor colours: Blue & White
- Conductor
- Gauge: 24AWG
- Material: Tinned copper
- Construction: 7/0.20 +/-0.008mm
- Insulation
- Standard thickness: 0.29mm
- Minimum thickness: 0.25mm
- Diameter: 1.20 +/-0.05mm
- Material: Poly vinyl chloride
- Colour: White/Blue
- Drain Wire
- Material: Tinned copper
- Construction: 7/0.20 +/-0.008mm
- Strand
- Construction: 24AWG + mylar + drain wire + aluminium foil
- Jacket
- Reference thickness: 1.0mm
- Diameter: 5.0 +/-0.05mm
- Material: Poly vinyl chloride
- Colour: Gray
- Conductor Area: 0.22mm2 (24AWG)
- Temperature Rating: 60ºC
- Roll Size: 100m
|
|
Aluminium mylar shield with drain wire.
Conductor colours: Blue & White |
|
W3036 ROHS
|
|
- Conductor colours: Blue & White
- Conductor
- Gauge: 24AWG
- Material: Tinned copper
- Construction: 7/0.20 +/-0.008mm
- Insulation
- Standard thickness: 0.29mm
- Minimum thickness: 0.25mm
- Diameter: 1.20 +/-0.05mm
- Material: Poly vinyl chloride
- Colour: White/Blue
- Drain Wire
- Material: Tinned copper
- Construction: 7/0.20 +/-0.008mm
- Strand
- Construction: 24AWG + mylar + drain wire + aluminium foil
- Jacket
- Reference thickness: 1.0mm
- Diameter: 5.0 +/-0.05mm
- Material: Poly vinyl chloride
- Colour: Gray
- Conductor Area: 0.22mm2 (24AWG)
- Temperature Rating: 60ºC
- Roll Size: 100m
|
|
Aluminium mylar shield with drain wire.
Conductor colours: Black & White |
 |
W3032 ROHS
|
|
- Conductor colours:
- Pair 1: Black & Red
- Pair 2: Green & White
- Size: 7/0.20
- No. of Conductors: 4
- No. of Strands: 7
- Strand Diameter: 0.20mm
- Outside Diameter: 4.6mm
- Conductor Area: 0.22mm2
- Temperature Rating: 60ºC
- Roll Size: 100m
|
|
Each pair individually shielded with aluminium mylar shield plus single drain wire.
Conductor colours:
Pair 1: Black & Red
Pair 2: Green & White |
|
W3033 ROHS
|
|
- Conductor colours:
- Pair 1: Black & Red
- Pair 2: Green & White
- Size: 7/0.20
- No. of Conductors: 4
- No. of Strands: 7
- Strand Diameter: 0.20mm
- Outside Diameter: 4.6mm
- Conductor Area: 0.22mm2
- Temperature Rating: 60ºC
- Roll Size:300m
|
|
Each pair individually shielded with aluminium mylar shield plus single drain wire.
Conductor colours:
Pair 1: Black & Red
Pair 2: Green & White |
 |
W0810 |
|
- Shrinkage 2:1
- Contains glue that has a waterproof function
- Hot melt adhesive label (shows size)
- Designed for easy operation
- Working temperature: - 55°C~125°C
- Fully contraction temperature: 130°C
- Solder began to melt temperature: 125°C
- Solder completely melt temperature: 150°C
|
|
Solder sleeves are heatshrink tubing fitted with central ring of solder which melts when heat is applied, allowing you to join two cables with minimum fuss! |
|
W0808 |
|
- Shrinkage 2:1
- Contains glue that has a waterproof function
- Hot melt adhesive label (shows size)
- Designed for easy operation
- Working temperature: - 55°C~125°C
- Fully contraction temperature: 130°C
- Solder began to melt temperature: 125°C
- Solder completely melt temperature: 150°C
|
|
Solder sleeves are heatshrink tubing fitted with central ring of solder which melts when heat is applied, allowing you to join two cables with minimum fuss! |
