|
Description |
Downloads |
Specs |
Ordering |
|
![W1000 Red 3mm Adhesive Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W1000.jpg) |
W1000 |
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Colour: Red
Nominal Ø: 3mm (4.5mm across when flattened)
Ø when shrunk: 1.5mm
Glue backed heatshrink is ideal for minimising cable movement and reducing moisture ingress into cable joins and plugs. |
![W7015 56/0.30 4mm 42A Solar Cable](https://images.altronics.com.au/thb/w/W7025.jpg) |
W7015 ROHS
|
|
- Size: 1 x 56/0.30
- Rating: 42A
- Outside diameter: 6.0mm
- Conductor: 4.0mm2 (11AWG)
- Rated voltage: 0.6kV AC, 1.8kV DC
- Rated Current: 42A
- Temperature rating: -40 to 90°C
|
|
Designed for use in solar panel systems installations. UV stabilised all weather, halogen free, double insulated construction. Super tough outer sheath impervious to oils & grease. |
![W0804 Solder Sleeve Heat Shrink Red Tube Pk6](https://images.altronics.com.au/thb/w/W0804.jpg) |
W0804 |
|
- Shrinkage 2:1
- Contains glue that has a waterproof function
- Hot melt adhesive label (shows size)
- Designed for easy operation
- Working temperature: - 55°C~125°C
- Fully contraction temperature: 130°C
- Solder began to melt temperature: 125°C
- Solder completely melt temperature: 150°C
|
|
Solder sleeves are heatshrink tubing fitted with central ring of solder which melts when heat is applied, allowing you to join two cables with minimum fuss! |
![W0808 Solder Sleeve Heat Shrink Blue Tube Pk6](https://images.altronics.com.au/thb/w/W0808.jpg) |
W0808 |
|
- Shrinkage 2:1
- Contains glue that has a waterproof function
- Hot melt adhesive label (shows size)
- Designed for easy operation
- Working temperature: - 55°C~125°C
- Fully contraction temperature: 130°C
- Solder began to melt temperature: 125°C
- Solder completely melt temperature: 150°C
|
|
Solder sleeves are heatshrink tubing fitted with central ring of solder which melts when heat is applied, allowing you to join two cables with minimum fuss! |
![W4221 16.5AWG Black 5 Core Trailer Cable](https://images.altronics.com.au/thb/w/W4221.jpg) |
W4221 NEW
|
|
- Size: 5 x 16/0.30
- Current Rating: 11A
- Outside Diameter: 7.4mm
- Conductor Area: 1.13mm2
- Conductor Gauge: 16AWG
- Temperature Rating: 90°C
- Voltage Rating: AC 50V / DC 120V to AS/NZS 3000:2000
- Insulation: V90 to AS/NZS 3808:2000
- Sheath Colour: Black (V90 to AS/NZS 3808:2000)
- Roll Size: 100m
|
|
5 core trailer cable for DC power wiring in automotive applications. |
![W2625 25 Wire IDC Cable](https://images.altronics.com.au/thb/w/W2625.jpg) |
W2625 ROHS
|
|
- Conductor
- Size: 28AWG (0.89mm2)
- Material: tinned copper
- Construction: 7/0.127mm
- Insulation
- Material: Fire resistant PVC 105ºC
- Average thickness: 0.26mm
- Minimum thickness: 0.18mm
- Diameter: 20 x 1.29±0.15mm
- Colour: grey (edge with red trace)
- Electric
- Conductor resistance: max. 237Ω/km, 20ºC
- Insulation resistance: min. 100MΩ/km, 20ºC
- Capacitance: 60pF/m (G-S-G), 42pF/m (G-S)
- Inductance: 1.45µH/m
- Impedance: 100±10Ω (G-S-G)
- Propagation delay time 5.0ns/m
- Spark test 2500V
- Dielectric strength: min. 2kV in 1 minute
- Rating voltage: max. 300V
- Rating temperature: -20ºC to 105ºC
- Standard: UL2651/CSA C22.2 No. 210.2
|
|
25 Way. Grey insulation. |
![W0812 Solder Sleeve Heat Shrink Yellow Tube Pk6](https://images.altronics.com.au/thb/w/W0812.jpg) |
W0812 |
|
- Shrinkage 2:1
- Contains glue that has a waterproof function
- Hot melt adhesive label (shows size)
- Designed for easy operation
- Working temperature: - 55°C~125°C
- Fully contraction temperature: 130°C
- Solder began to melt temperature: 125°C
- Solder completely melt temperature: 150°C
|
|
Solder sleeves are heatshrink tubing fitted with central ring of solder which melts when heat is applied, allowing you to join two cables with minimum fuss! |
![W0576 16AWG 3 Core 15A Mains Flex Black](https://images.altronics.com.au/thb/w/W0572.jpg) |
W0576 |
|
- Size: 3 x 32/0.25
- Voltage Rating: 240V AC
- Current Rating: 15A
- Outside Diameter: 8.3mm
- Conductor Area: 1.5mm2
- Conductor Gauge: 16AWG
- Roll Size: 100m
|
|
240V rated, black outer sheath. 15A |
![W0993A Black 5mm Adhesive Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W0993A.jpg) |
W0993A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Colour: Black
Nominal : 5mm (8mm across when flattened)
Ø when shrunk: 2.5mm
Glue backed heatshrink is ideal for minimising cable movement and reducing moisture ingress into cable joins and plugs. |
![W1001 Red 5mm Adhesive Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W1002.jpg) |
W1001 |
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Colour: Red
Nominal Ø: 5mm (8mm across when flattened)
Ø when shrunk: 2.5mm
Glue backed heatshrink is ideal for minimising cable movement and reducing moisture ingress into cable joins and plugs. |
![W2626 26 Wire IDC Cable](https://images.altronics.com.au/thb/w/W2626.jpg) |
W2626 ROHS
|
|
- Conductor
- Size: 28AWG (0.89mm2)
- Material: tinned copper
- Construction: 7/0.127mm
- Insulation
- Material: Fire resistant PVC 105ºC
- Average thickness: 0.26mm
- Minimum thickness: 0.18mm
- Diameter: 26 x 1.29±0.15mm
- Colour: grey (edge with red trace)
- Electric
- Conductor resistance: max. 237Ω/km, 20ºC
- Insulation resistance: min. 100MΩ/km, 20ºC
- Capacitance: 60pF/m (G-S-G), 42pF/m (G-S)
- Inductance: 1.45µH/m
- Impedance: 100±10Ω (G-S-G)
- Propagation delay time 5.0ns/m
- Spark test 2500V
- Dielectric strength: min. 2kV in 1 minute
- Rating voltage: max. 300V
- Rating temperature: -20ºC to 105ºC
- Standard: UL2651/CSA C22.2 No. 210.2
|
|
26 Way, 1.27mm pitch. Grey insulation. |
![W2516 16 Wire Rainbow Ribbon Cable](https://images.altronics.com.au/thb/w/W2524.jpg) |
W2516 ROHS
|
|
- 1.27mm Pitch.
- Conductors 10 x 0.12mm.
- 30m Roll
|
|
1.27mm Pitch.
Conductors 10 x 0.12mm.
30m Roll |
![W3024 Canare 2 Core Heavy Duty Microphone Cable](https://images.altronics.com.au/thb/w/W3024.jpg) |
W3024 ROHS
|
|
- Shielding
- Coverage: >94%
- Inner conductors
- Size: 2 x 60/0.08
- Outside diameter: ≈6.0mm
- Conductor area: 0.30mm2, 23 AWG
- Roll Size: 100m
|
|
High quality Canare brand cabling designed to have maximum flexibility whilst transmitting minimal handling noise. Special soft outer jacket resists cuts, tears and temperature variations. |
![W0856 5mm x 1.2m length Fibreglass Sheathing](https://images.altronics.com.au/thb/w/W0856.jpg) |
W0856 |
|
|
|
Provides heat (up to 450C) protection for cabling. Ideal for automotive or industrial use.
5mm diametre, 1.2m length. |
![W4154 12AWG Heavy Duty Automotive Black Figure 8 Cable](https://images.altronics.com.au/thb/w/W4154.jpg) |
W4154 ROHS
|
|
- Size: 2 x 56/0/30
- Voltage Rating: 300V AC
- Current Rating: 20Amps
- Outside Dimensions: ≈5.6 x 9.2mm
- Conductor Area: 4.0mm2
- Conductor Gauge: ≈12AWG
- Temperature Rating: 75°C
- Roll Size: 100m
|
|
Double PVC insulated twin. Separate conductors with non-bonded sheath. |
![W2634 34 Wire IDC Cable](https://images.altronics.com.au/thb/w/W2634.jpg) |
W2634 ROHS
|
|
- Conductor
- Size: 28AWG (0.89mm2)
- Material: tinned copper
- Construction: 7/0.127mm
- Insulation
- Material: Fire resistant PVC 105ºC
- Average thickness: 0.26mm
- Minimum thickness: 0.18mm
- Diameter: 34 x 1.29±0.15mm
- Colour: grey (edge with red trace)
- Electric
- Conductor resistance: max. 237Ω/km, 20ºC
- Insulation resistance: min. 100MΩ/km, 20ºC
- Capacitance: 60pF/m (G-S-G), 42pF/m (G-S)
- Inductance: 1.45µH/m
- Impedance: 100±10Ω (G-S-G)
- Propagation delay time 5.0ns/m
- Spark test 2500V
- Dielectric strength: min. 2kV in 1 minute
- Rating voltage: max. 300V
- Rating temperature: -20ºC to 105ºC
- Standard: UL2651/CSA C22.2 No. 210.2
|
|
34 Way. Grey insulation. |
![W0994A Black 6mm Adhesive Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W0994A.jpg) |
W0994A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Colour: Black
Nominal : 6mm (9.5mm across when flattened)
Ø when shrunk: 3mm
Glue backed heatshrink is ideal for minimising cable movement and reducing moisture ingress into cable joins and plugs. |
![W1002 Red 6mm Adhesive Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W1002.jpg) |
W1002 |
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Colour: Red
Nominal Ø: 6mm (9.5mm across when flattened)
Ø when shrunk: 3mm
Glue backed heatshrink is ideal for minimising cable movement and reducing moisture ingress into cable joins and plugs. |
![W0917A Black 20mm Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W0917A.jpg) |
W0917A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
Nominal Ø: 20mm (31.5mm across when flattened) Ø when shrunk: 10mm
Military grade flexible tubing. Suitable for insulation, colour coding, strain relief and protection in electrical and electronic applications. |
![W0927A Red 20mm Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W0920.jpg) |
W0927A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
This heat shrink is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work. |
![W0937A Blue 20mm Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W0937A.jpg) |
W0937A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
This heat shrink is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work. |
![W0947A White 20mm Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W0947A.jpg) |
W0947A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
This heat shrink is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work. |
![W0957A Clear 20mm Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W0957A.jpg) |
W0957A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
This heat shrink is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work. |
![W0967A Green 20mm Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W0967A.jpg) |
W0967A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
GREEN 20MM
Military grade flexible tubing. Suitable for insulation, colour coding, strain relief and protection in electrical and electronic applications. |
![W0977A Yellow 20mm Heat Shrink Tubing 1.2m Length](https://images.altronics.com.au/thb/w/W0977A.jpg) |
W0977A ROHS
|
|
- 2:1 shrink ratio.
- Flexible and hard wearing material.
- Provides additional environmental protection for cable joins, connectors and sheaths.
- Meets MIL-I-23053/5 class one.
- -55°C to 135°C continuous temperature rating.
- 300°C short duration temperature rating.
|
|
This heat shrink is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work. |