|
Description |
Downloads |
Specs |
Ordering |
|
 |
A4155 |
|
- Output Power (Stereo 8Ω): 150W + 150W
- TA 1KHz THD≤1% (4Ω): 220W + 220W
- Bridge 8Ω: 440W
- Frequency Response: 20Hz-20KHz +/-0.5dB
- Input Sensitivity: 0.77V
- Maximum input level: 18dB/6.2V
- Input Impedance active balanced: 20KOHMS/Balanced, 10KOHMS/un-Balanced
- Signal/noise ration a-weighted RMS: ≥95dB
- Crosstalk at rated output power (8Ω 1kHz): >70dB
- Damping Factor (f=1kHz 8Ω): >240
- Slew rate internal: 15V/us
- Protection: Short circuit, current limited DC fault AC line fuse, thermal cut off, power up/down transients
- Indicators: POWER (BLUE) PROT (RED) CLIP (YELLOW) BR (GREEN) PAR (GREEN)
- Cooling: Variable Speed Fan
- Front Panel Controls: LEVEL ACH, BCH POWER SWITCH
- Rear Panel Controls: STEREO/BRIDGE/PARALLEL MODE SWITCH
- Connector: XLR BALANCED INPUT, PROFESSIONAL SPEAKON OUTPUT
- Power consumption half power 8Ω: <440W
- Power Supply: 240V AC/50Hz
- Interior Dimensions: 482 x 325.5 x 88mm
- Exterior Dimensions: 555 x 415 x 168mm
- Net Weight: 8.5kg
- Gross Weight: 10.5kg
|
|
The Apple series Biema power amplifiers are a cost effective solution for demanding commercial audio applications. These non-bridgeable models are designed to be used as standard 2 channel or stereo amplifiers. The design incorporates a fan forced cooling sys |
 |
A4157 |
|
- Output Power (Stereo 8Ω): 250W + 250W
- TA 1KHz THD≤1% (4Ω): 370W + 370W
- Bridge 8Ω: 740W
- Frequency Response: 20Hz-20KHz +/-0.5dB
- Input Sensitivity: 0.77V
- Maximum input level: 18dB/6.2V
- Input Impedance active balanced: 20KOHMS/Balanced, 10KOHMS/un-Balanced
- Signal/noise ration a-weighted RMS: ≥95dB
- Crosstalk at rated output power (8Ω 1kHz): >70dB
- Damping Factor (f=1kHz 8Ω): >240
- Slew rate internal: 15V/us
- Protection: Short circuit, current limited DC fault AC line fuse, thermal cut off, power up/down transients
- Indicators: POWER (BLUE) PROT (RED) CLIP (YELLOW) BR (GREEN) PAR (GREEN)
- Cooling: Variable Speed Fan
- Front Panel Controls: LEVEL ACH, BCH POWER SWITCH
- Rear Panel Controls: STEREO/BRIDGE/PARALLEL MODE SWITCH
- Connector: XLR BALANCED INPUT, PROFESSIONAL SPEAKON OUTPUT
- Power consumption half power 8Ω: <740W
- Power Supply: 240V AC/50Hz
- Interior Dimensions: 482 x 325.5 x 88mm
- Exterior Dimensions: 555 x 415 x 168mm
- Net Weight: 9kg
- Gross Weight: 10kg
|
|
The Apple series Biema power amplifiers are a cost effective solution for demanding commercial audio applications. These non-bridgeable models are designed to be used as standard 2 channel or stereo amplifiers. The design incorporates a fan forced cooling sys |
 |
A4159 |
|
- Output Power (Stereo 8Ω): 350W + 350W
- TA 1KHz THD≤1% (4Ω): 500W + 500W
- Bridge 8Ω: 1000W
- Frequency Response: 20Hz-20KHz +/-0.5dB
- Input Sensitivity: 0.77V
- Maximum input level: 18dB/6.2V
- Input Impedance active balanced: 20KOHMS/Balanced, 10KOHMS/un-Balanced
- Signal/noise ration a-weighted RMS: ≥95dB
- Crosstalk at rated output power (8Ω 1kHz): >70dB
- Damping Factor (f=1kHz 8Ω): >240
- Slew rate internal: 15V/us
- Protection: Short circuit, current limited DC fault AC line fuse, thermal cut off, power up/down transients
- Indicators: POWER (BLUE) PROT (RED) CLIP (YELLOW) BR (GREEN) PAR (GREEN)
- Cooling: Variable Speed Fan
- Front Panel Controls: LEVEL ACH, BCH POWER SWITCH
- Rear Panel Controls: STEREO/BRIDGE/PARALLEL MODE SWITCH
- Connector: XLR BALANCED INPUT, PROFESSIONAL SPEAKON OUTPUT
- Power consumption half power 8Ω: <440W
- Power Supply: 240V AC/50Hz
- Interior Dimensions: 482 x 325.5 x 88mm
- Exterior Dimensions: 555 x 415 x 168mm
- Net Weight: 9.5kg
- Gross Weight: 11.5kg
|
|
The Apple series Biema power amplifiers are a cost effective solution for demanding commercial audio applications. These non-bridgeable models are designed to be used as standard 2 channel or stereo amplifiers. The design incorporates a fan forced cooling sys |
 |
A4173 |
|
- Rugged heavy duty construction
- 19” rack mount
- Bridgeable, parallel or two channel stereo operation
- Earth lift switch
- 3 pin XLR and 6.35mm inputs.
- Short circuit protection with indicator
- Overload protection with indicator
- Clipping prevention circuitry with indicator
- Variable speed fan forced cooling
- Muting circuit for switch on/off
|
|
This range is designed to function as a stereo or high power single channel amplifier for use in foreground sound reinforcement ie: pubs, clubs, cinemas and multi-function venues. |
 |
A4173A |
|
- Rugged heavy duty construction
- 19” rack mount
- Bridgeable, parallel or two channel stereo operation
- Earth lift switch
- 3 pin XLR inputs.
- Short circuit protection with indicator
- Overload protection with indicator
- Clipping prevention circuitry with indicator
- Variable speed fan forced cooling
- Muting circuit for switch on/off
|
|
This new series dubbed the "Apple" range have been completely redesigned by Biema to offer vastly improved cooling, efficiency and circuit protection. This range is designed to function as a stereo or high power single channel amplifier for use in foreground sound reinforcement ie: pubs, clubs, cinemas and multi-function venues. |
 |
A5332 |
|
- Input impedance: 20KΩ (bal.)
- Maximum input level: ≥16dB
- Connections: Balanced XLR, 6.35mm jack
- Output impedance: 100Ω
- Maximum output level: ≥15dB
- Equaliser control 31 band (1/3 octave)
- High pass filter: 40Hz 12dB/octave
- Feedback threshold LED: ≥-22dB
- Peak sensitivity: Lit 3dB before clip point
- Frequency response: 20Hz - 20KHz (±0.5dB)
- THD + S/N %: <0.1% (20Hz - 20KHz @ 0dB)
- S/N ratio: ≥90dB
- Power supply: 240VAC
- Dimensions: ≈482W x 230D x 132Hmm
- Weight: 5.4kg
|
|
This professional unit delivers outstanding equalisation both in live or studio applications. Invaluable
for counteracting poor room or venue acoustics. The design employs ultra low noise audio amplifiers
with high quality components for outstanding sou |
 |
C0988 |
|
- Input power (continuous): 35W RMS
- Impedance: 4 ohm
- Freq response: 80Hz-18kHz
- SPL 1W @ 1m: 86dB
- Max SPL: 104dB
- Dimensions: 285H x168W x 155D
- Weight: 3.6kg
|
|
Manufactured from tough polypropylene, these compact full range speakers are designed for use in a multitude of venues. They offer excellent performance in high fidelity, high power, foreground music applications. Engineered using sophisticated acoustic d |
 |
C0996B |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via Speakon. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C0996C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via Speakon. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C0998B |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. This active model features balanced XLR input. All active models allow the music signal to be daisychained to extra speakers. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C1000C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via Speakon. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C1002B |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. This active model features balanced XLR input. All active models allow the music signal to be daisychained to extra speakers. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C1004B |
|
- Rating: 300W (RMS)
- Impedance: 4Ω
- SPL (1W @1m): 97dB
- Frequency Resp: 65Hz - 20kHz
- Dimensions (mm): 390 x 320 x 580
- Weight: 13.5kg
|
|
A high power compact sound solution for bands, DJs and venues. |
 |
C1004C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via Speakon. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C1006B |
|
- Rugged moulded ABS construction
- Cast aluminium frame bass driver with large voice coil diameter
- Inbuilt top hat mount and carry handle
- Wide frequency response
- Titanium diaphragm compression driver
- 4 rigging points
|
|
A high power design which is suited to bands, DJs and venues where excellent quality, temporary sound is required. In-built carry handles make set up a breeze. Balanced input and output. Adjustable bass, treble & volume. |
 |
C1006C |
|
- Rugged moulded ABS construction
- Inbuilt carry handle
- Top hat recess for stand mounting
- Ideal for small or large venues
- Ideal for DJs bands and hire companies
- Active design set up in seconds, just plug in an input and switch on
- Balanced XLR & 6.35mm input and XLR output
- Wide frequency range
- Daisy chain outputs for easy set up
|
|
This stylish compact speaker will make a great addition to any band/DJ set ups and entertainment venues where excellent quality, temporary sound is required. |
 |
C1008C |
|
- Every model features rugged nylon fibre and ABS moulded cabinets with carry handles inbuilt - designed with portability in mind. The Biema series offer a ‘no compromises’ design approach for professional users, DJs, bands and hire companies. All models allow for speaker stand mounting via a top hat recess in the base. Can be connected via SpeakOn. These speakers come in a range of sizes depending on the size of venue and crowd you have.
|
|
A high power compact sound solution for bands, DJs and venues. Rugged enclosure design coupled with excellent audio performance. Suits stand or flood mounting. |
 |
C1023A |
|
- High power handling.
- All wooden trapezoidal cabinetry.
- Designed in the USA.
- Suitable for foldback use, speaker stand or permanent wall mounting.
- Hard wearing stippled finish with steel grille.
- Speakon loop output.
- Multiple rigging points for 8mm eyebolts.
- Sold in matching pairs.
|
|
This 8" 75W Coaxial PA Pro Speaker Pair is part of a new series by Biema. This new range has been engineered using the most advanced acoustic design software. |
 |
C1026A |
|
- Frequency Response: 65Hz - 18KHz
- Driver: BML-T804; BMH-V270
- Impedance: 8 ohm
- Directivity Angle: H100°x V80°
- Power: 75W RMS
- Sensitivity: 93dB
- Maximum SPL: 112dB (continuous) 118dB (peak)
- Connector: 2xNL4R
- Dimensions: 285W x 270D x 455Hmm
- Weight: 9.8kg
|
|
This 200mm (8") 75W PA Pro Speaker Pair is part of a new series by Biema. This new range has been engineered using the most advanced acoustic design software. |
 |
C1029A |
|
- Frequency Response: 65Hz - 18KHz
- Driver: BML-T1002; BMH-A3
- Impedance: 8 ohm
- Directivity Angle: H100°x V80°
- Power: 150W RMS
- Sensitivity: 94dB
- Maximum SPL: 116dB (continuous) 122dB (peak)
- Connector: 2xNL4R
- Dimensions: 330W x 315D x 530Hmm
- Weight: 16kg
|
|
This 8&quot 75W PA Pro Speaker Pair is part of a new series by Biema. This new range has been engineered using the most advanced acoustic design software. |
 |
C1032A |
|
- Frequency Response: 55Hz - 18KHz
- Driver: BML-T1202; BMH-A4
- Impedance: 8 ohm
- Directivity Angle: H90°x V60°
- Power: 200W RMS
- Sensitivity: 95dB
- Maximum SPL: 118dB (continuous) 124dB (peak)
- Connector: 2xNL4R
- Dimensions: 375W x 360D x 610Hmm
- Weight: 23kg
|
|
This 2 Way 300mm (12") 150W PA Pro Speaker Pair is part of a new series by Biema. This new range has been engineered using the most advanced acoustic design software. The cabinets trapezoidal shape allows installation as a floor mount foldback configuration or on a speaker stand utilising the 35mm top hat recess in the base. |
 |
C1034 NEW
|
|
- Speaker column is housed in an aluminum alloy cabinet for added durability.
- Subwoofer is made of a high-quality birch plywood sprayed with black environmental protection paint for the rough and tumble of hire use.
- 12" driver in each subwoofer unit.
- Column features multiple Italian designed Lavoce® 3" high power drivers.
- High power four channel class D power amplifier module.
- 2 channel inputs via 3 pin XLR/6.35mm balanced/unbalanced combination sockets.
- Dual balanced 3 pin XLR outputs.
- Built-in bluetooth 5.0 module for streaming from your favourite devices.
- Speaker pole connects easily to the subwoofer and can be adjusted to change sound dispersion.
- Built in DSP processor allows multiple presets to be stored and recalled.
- Built in effect processing.
- All functions are integrated into one system, which is easy to operate and quick to start.
|
|
This 1000W PA Column Speaker system is a plug and play active speaker system ideal for small live shows, small parties, bands, musicians or anywhere foreground sound reinforcement is required. |
 |
C1035 NEW
|
|
- Speaker column is housed in an aluminum alloy cabinet for added durability.
- Subwoofer is made of a high-quality birch plywood sprayed with black environmental protection paint for the rough and tumble of hire use.
- Dual 8" woofers in each subwoofer unit (total 4 drivers)
- Column features multiple Italian designed Lavoce® 3" high power drivers.
- High power four channel class D power amplifier module.
- 2 channel inputs via 3 pin XLR/6.35mm balanced/unbalanced combination sockets.
- Dual balanced 3 pin XLR outputs.
- Built-in bluetooth module for streaming from your favourite devices.
- Speaker pole connects easily to the subwoofer and can be adjusted to change sound dispersion.
- Built in DSP processor allows multiple presets to be stored and recalled.
- Built in effect processing.
- All functions are integrated into one system, which is easy to operate and quick to start.
|
|
This 1200W PA column speaker system is a plug and play active speaker system ideal for small live shows, small parties, bands, musicians or anywhere foreground sound reinforcement is required. |
 |
C1221 |
|
|
|
Mounting Bracket to suit C1220. |
 |
C5215 NEW
|
|
- Rated power: 200W @ 8 Ohm
- Max SPL: 112dB
- Frequency response: 45Hz - 150Hz
- Connection: Spring terminal
- Weight: 7.8kg
- Dimensions (mm): 375W x 375D x 116H
|
|
These ultra compact passive subwoofers feature 4 x 4” long throw drivers in a tuned enclosure designed for installation in domestic and commercial sound systems. |
 |
C5216 NEW
|
|
- Rated power: 200W @ 8 Ohm
- Max SPL: 112dB
- Frequency response: 45Hz - 150Hz
- Connection: Spring terminal
- Weight: 7.8kg
- Dimensions (mm): 375W x 375D x 116H
|
|
These ultra compact passive subwoofers feature 4 x 4” long throw drivers in a tuned enclosure designed for installation in domestic and commercial sound systems. |
 |
H3320 |
|
|
|
eye bolt for rigging. Suits; C1023A, C1026A, C1029A and C1032A |
 |
P0685 |
|
|
|
10m SpeakOn connector to SpeakOn connector audio lead. Genuine SpeakOn connectors. |
|
P0686 |
|
|
|
20m SpeakOn connector to SpeakOn connector audio lead. Genuine SpeakOn connectors. |
 |
P8099 NEW
|
|
|
|
All slimline wall mounting plate to suit C5215 and C5216 Biema slimline subwoofers. |
Biema