| Description | Downloads | Specs | Ordering | ||
|---|---|---|---|---|---|
 |
MDR-60-24 60W 24VDC 2.5A DIN Rail Switchmo...M8409A |
|
| The Mean Well MDR-60-24 provides 24VDC 2.5A output with a rated power output of 60W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. | |
 |
MDR-60-24 60W 48VDC 1.25A DIN Rail Switchm...M8413A |
|
| The Mean Well MDR-60-48 provides 48VDC 1.25A output with a rated power output of 60W. The compact enclosure is easy to wire with recessed terminals. Each Mean Well power supply includes protection from short circuit, over load and over voltage conditions to protect the supply and connected equipment from damage. | |
 |
Mechanical Mains 240V Timer 24 HourX8010A |
| Standard 24 hour 240V mains timer. Allows easy selection of ON and OFF times at any 15 minute interval in a 24 hour period. Power down office appliances when you don't need them, for instance the coffee machine or photocopier after 5pm. | ||
 |
Micro USB To 2.1mm 5V DC AdapterP6730 |
| Micro USB to 2.1mm DC Adapter | ||
 |
Mobile Battery Bank 5000mAHD0505B |
|
| A high capacity, slimline, lithium-polymer battery bank designed to keep your smart- phone, tablet or handheld game console powered up whilst out and about! | |
 |
Multi Lead Battery Bank 12000mAhD0510A NEW |
|
| Charge any device, anywhere. This high capacity 12000mAh battery bank has charging cables in-built for USB C, Micro USB and Apple Lightning equipped devices. It even includes the recharging cable! | |
 |
Multi Reverse Adapter- Worldwide to Austra...A0300A |
|
| Allows appliances from all over the world to be plugged into Australian outlets. Use on almost any appliance, such as mobile phone chargers, shavers, irons or laptops. Suits appliances from most countries. | |
 |
NiMh / NiCad AA / AAA USB Battery ChargerA0290A |
|
| Charges up to four AA/AAA or 2 x 9V Ni-MH or Ni-Cad cells at once for keeping your devices powered up. Indicators display charging mode at a glance. Automatically stops once cells are charged. | |
 |
PCMin 12V DC 18W NBN Uninterruptible Power...D0875 |
|
| This compact plugpack style NBN UPS is fitted with an internal lithium-ion battery pack for keeping devices powered up during a power outage. Appliances may then be shutdown safely, protecting from data loss, corruption or damage. 12V DC output with 8 DC jack tips to suit a wide range of appliances. Ideal size for small phone systems, POS, tills, r | |
 |
Polarity Reversing Cable 2.1mm DC Socket t...P6705 |
| A black 0.1m lead with a 2.1mm plug to 2.1mm socket with the polarity reversed. | ||
 |
Polarity Reversing Cable 2.5mm DC Socket t...P6706 |
| A black 0.1m lead with a 2.5mm plug to 2.5mm socket with the polarity reversed. | ||
 |
Powershield Replacement Battery Cartridge ...D0930 |
| Cartridge style battery replacements enclosed in a plastic housing to prevent accidental shorts and make the replacement process simple. Special order only! | ||
 |
PSAS400D UPS Relay Card With D ConnectorDB0891 |
| The relay card (PSAS400) provides volt free contact (VFS) relays that change state upon UPS events. This type of card is often used when current loop communications are required for devices such as building management systems (BMS), access control alarm panels or industrial PLCs. User selectable normally open (default) or normally closed contacts. | ||
 |
PSAS400T UPS Relay Card With Screw TerminalsDC0891 |
| The PSAS400 communication card provides contact closures for remote monitoring of your UPS. To meet different application requirements the PSAS400 card is capable of selecting the status of the dry-contact signal (active close or active open) by setting jumper. | ||
 |
PSCEBB12 Extended Battery Module for PSCE2...D0907 |
|
| Add run time to your PowerShield Centurion UPS system with the PSCEBB12. Extends the standard run time at 50% load from 26 minutes to 104 minutes. | |
 |
PSCEBB18CH Battery Module & Charger for PS...D0908 |
|
| Add run time to your PowerShield Centurion UPS system with the PSCEBB18CH. Extends the standard run time for PSCE2000 at 50% load from 26 minutes to 220 minutes. | |
 |
PSCEBB6 Extended Battery Module for PSCE10...D0905 |
|
| Add run time to your PowerShield Centurion UPS system with the PSCEBB6. Extends the standard run time at 50% load from 26 minutes to 104 minutes. | |
 |
PSCEBB60CH Battery Module & Charger for PS...D0909 |
|
| Add run time to your PowerShield Centurion UPS system with the PSCEBB60CH. Extends the standard run time for PSCE6000 at 50% load from 28 minutes to 232 minutes. | |
 |
PSCSSNMP Cyber Secure Comms Card To PowerS...DS0891 |
|
| The Cyber-Secure SNMP follows the Australian Cyber Security Centre (ACSC) Information Security Manual (ISM) framework for risk management and cyber threats to protect information and systems from external threats. The Cyber Secure Web card follows industry standards for the user interface and offers complex emergency procedures to be enacted simply | |
 |
PSD1200 UPS 1200VA DefenderD0882A |
|
| Designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally, | |
 |
PSD1600 UPS 1600VA DefenderD0883 |
|
| Designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally, | |
 |
PSD2000 UPS 2000VA DefenderD0886 |
|
| The Powershield Defender AVR 2000VA Uninterruptible Power Supply (UPS) is designed to support multiple computers and peripherals, networked PC's and point of sale systems. | |
 |
PSD650 UPS 650VA DefenderD0881 |
|
| The Powershield Defender PSD 650VA Uninterruptible Power Supply (UPS) is designed to support multiple computers and peripherals, networked PC''s and point of sale systems. | |
 |
PSDR800 UPS 800VA Defender Rack MountD0884 |
|
| This UPS 800VA Defender Rack Mount expands the successful Defender Range by building the popular features into a Rack Mount UPS. At 230mm deep, this is the perfect UPS for shallow, wall mounted Comms cabinets. This versatile UPS uses Automatic Voltage Regulation (AVR) to minimise the effects of fluctuations in input voltage, protecting your valu | |
 |
PSEMD Environmental Monitoring Device For ...D0918 |
| The PowerShield Environmental Monitoring Device (PSEMD) is a PSSNMPV4 accessory suited for monitoring temperature and humidity. Email alerts and or system shutdown can be initiated if the user defined thresholds are exceeded. It offers two additional dry contact inputs for sensors such as smoke detectors and tamper switches. |
