|
Description |
Downloads |
Specs |
Ordering |
|
 |
PW8438 |
|
- Fitted with IEC C13 connector and standard Australian 3 pin mains plug with earthing pin.
- 2 metre length.
- 3 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
White mains appliance power cable. IEC Female to 3 Pin 2m. Energy authority approved |
 |
PW8404 |
|
- Fitted with IEC C7 connector and standard Australian 2 pin mains plug.
- 1.8 metre length.
- 2 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
White mains appliance power cable. 2.5A 2 Pin to Figure 8 plug 1.8m. Energy Authority approved. |
 |
P6703 |
|
|
|
A black 1m lead with a 1.35mm DC plug to a USB type 'A' plug. |
 |
P8156 |
|
- High surge protection
- Recessed On/Off Switch
- Wide spaced socket to allow for plug packs
- $60,000 Connected Equipment Warranty – terms and conditions apply.
- 10A Circuit Breaker
- 1 x Type A USB Socket
- 1 x Type C USB Socket
- 8 x Surge-protected sockets supply complete, 3 line AC protection
- Impact and scratch resistant Polycarbonate case
- Heavy-duty 1.2-meter power cord
- Wall mountable
- LED indicator shows that your wiring is properly earthed and protection is active and available
|
|
This powerboard will protect your home and office electronics from dangerous surges and spikes and is ideal for charging mobiles, laptops and other small USB powered devices. |
 |
DA0924
|
|
- True double-conversion
- HID comms via USB
- Output power factor 0.9
- User-friendly and electronic easy-shift LCD display
- Rack or Tower design
- Advanced ECO mode for energy saving
- Generator compatible
- Programmable power management outlets
- Emergency Power Off function (EPO)
- Hot swappable battery design
- Ideal for medium density power protection
- Extra large charger
|
|
features true online double conversion and a Lithium-iron Phosphate advantage that includes extended battery life, lighter weight, faster recharge, higher performance and higher power density. |
 |
DA0922
|
|
- True double-conversion
- HID comms via USB
- Output power factor 0.9
- User-friendly and electronic easy-shift LCD display
- Rack or Tower design
- Advanced ECO mode for energy saving
- Generator compatible
- Programmable power management outlets
- Emergency Power Off function (EPO)
- Hot swappable battery design
- Ideal for medium density power protection
- Extra large charger
|
|
features true online double conversion and a Lithium-iron Phosphate advantage that includes extended battery life, lighter weight, faster recharge, higher performance and higher power density. |
 |
DA0920
|
|
- True double-conversion
- HID comms via USB
- Output power factor 0.9
- User-friendly and electronic easy-shift LCD display
- Rack or Tower design
- Advanced ECO mode for energy saving
- Generator compatible
- Programmable power management outlets
- Emergency Power Off function (EPO)
- Hot swappable battery design
- Ideal for medium density power protection
- Extra large charger
|
|
features true online double conversion and a Lithium-iron Phosphate advantage that includes extended battery life, lighter weight, faster recharge, higher performance and higher power density. |
 |
N2097 |
|
- Suitable for any 12VDC system up to 8A direct current loads like motors, lamps, heaters & LEDs (with current limiting resistors).
- Electric motor can start smoothly at low speed with this PWM controller.
- Replaces the resistor circuit for control of the speed of DC motors
- Frequently used as light dimmer.
- Energy efficient with zero to full speed control
- Light dimmer capable of smooth control
- The whole PCBA is potted in epoxy and with the special splash proof tuning potentiometer making this controller weather proof.
|
|
This 12VDC 8A pulse width modulator (PWM) is a general purpose DC output power control. |
 |
D0511B
|
|
- Ultra high capacity power bank with Power Delivery and Quick Charge™ function.
- Charge latest tablets, smartphones, portable game consoles and more.
- USB-C Power Delivery will deliver power delivery support at 18W to compatible devices.
- Dual Quick Charge™ 3.0 outputs will charge compatible smartphones and tablets 4 times faster.
- High speed Micro USB (QC2.0) and USB-C (Power Delivery) inputs for recharging.
|
|
Offering both the latest QuickCharge 3.0 charging and 18W USB-C PD output, this enormous 20,000mAh power bank will keep your devices charged away from mains power. 136x70x25mm |
 |
M9393B |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
24V DC Switchmode Plugpack Supplied with reversible polarity 2.1mm DC tip. Compact design with high current regulated output. |
 |
D2324 |
|
|
|
This 15W wireless phone charger stand is ideal for home or office. |
 |
D2322 |
|
- 10W charging coil
- Near flush mount design provides a neat and tidy finish.
- Overall diameter 80mm
- 60mm mounting hole size
- Includes 2 metre USB cable and mains power adaptor
|
|
This ultra-slim desk mount 10W wireless charging pad offers convenient device charging for your workspace. It fits into a 60mm diameter desk hole and provides cable free charging for your phone while you work. Includes power adaptor and USB cable - nothing more to buy! |
 |
D2323 |
|
- Two USB QuickCharge 3.0 charging ports.
- USB type C Power Delivery charging port.
- Can charge a phone, tablet and laptop simultaneously.
- Suits standard 60mm desk cabling hole.
- Protective sliding dust cover.
- Near flush mount finish.
|
|
This USB power delivery charger allows you to build fast convenient device charging into your desk and is capable of charging a phone, laptop and tablet simultaneously thanks to a generous 96W power supply (included). |
 |
M8903A |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
5V DC Switchmode Plugpack Supplied with a fixed positive to tip 2.1mm DC jack. Compact design with high current regulated output. Energy authority approved. MEPS approved. |
 |
S4563 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 12.5kg
- Charging
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Nominal Capacity: 40Ah @ 20hour rate.FV (1.75/Cell)
- Internal Resistance (1KHz): 10mΩ
- Max. Discharge Current (5s): 380A
- Battery Life: 3-5 years standby
- Terminal Type: M6/F8
- Container Material: ABS
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
- Max Charge Current
- Cycle Use:
- Max Charge Current: 12A
- Charge Voltage: 14.4V to 15.0V
- Stand by:
- Charge Voltage: 13.5V to 13.8V
|
|
This 12V 40Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4554 |
|
- General
- Dimensions: 165L x 175W x 125H mm (including tabs)
- Weight: 8.3kg
- Terminal: M5 bolt (F12)
- Capacity
- 20 Hour Rate (10.5V): 26Ah
- 10 Hour Rate (10.5V): 24.1Ah
- 1 Hour Rate (9.6V): 16.4Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 15MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 7.8A
- Maximum Discharging Current: 390A (5 sec.)
- Designed Floating Life: 5 years.
|
|
his 12V 26Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4547 |
|
- General
- Dimensions: 151L x 98W x 101H mm (including tabs)
- Weight: 3.6kg
- Capacity
- 20 Hour Rate (10.5V): 12Ah
- 10 Hour Rate (10.5V): 11.2Ah
- 1 Hour Rate (9.6V): 7.8Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 20MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 3.6A
- Maximum Discharging Current: 180A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 12Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4542 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.6kg
- Capacity
- 20 Hour Rate (10.5V): 9Ah
- 10 Hour Rate (10.5V): 8.4Ah
- 1 Hour Rate (9.6V): 5.9Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 20MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.7A
- Maximum Discharging Current: 135A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 9Ah sealed lead acid (SLA) battery is one of the most common size SLA batteries in use. |
 |
S4540 |
|
- General
- Dimensions: 151L x 65W x 100H mm (including tabs)
- Weight: 2.2kg
- Capacity
- 20 Hour Rate (10.5V): 7.2Ah
- 10 Hour Rate (10.5V): 6.7Ah
- 1 Hour Rate (9.6V): 4.67Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: <25mΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 2.16A
- Maximum Discharging Current: 108A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 7.2Ah sealed lead acid (SLA) battery is perhaps the most common size SLA battery in use. |
 |
S4532 |
|
- General
- Dimensions: 90L x 70W x 107H mm (including tabs)
- Weight: 1.45kg
- Capacity
- 20 Hour Rate (10.5V): 4.5Ah
- 10 hour Rate (10.5V): 4.2Ah
- 1 Hour Rate (9.60V): 2.95Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 45MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -18mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -30mV/°C)
- Maximum Charging Current: 1.35A
- Maximum Discharging Current: 67.5A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 4.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4528 |
|
- General
- Dimensions: 79L x 56W x 107H mm (including tabs)
- Weight: 1.1kg
- Charging
- 20 Hour Rate (10.5V): 2.9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 34MΩ
- Max Discharge Current: 43.5A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 0.87A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 2.9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4517 |
|
- General
- Dimensions: 97L x 43W x 58H mm (including tabs)
- Weight: 0.55kg
- Capacity
- 20 Hour Rate (5.25V): 1.3Ah
- 10 Hour Rate (5.25V): 1.1Ah
- 1 Hour Rate (4.8V): 0.78Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 95MΩ
- Float Charging Voltage: 13.6 - 13.8V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 14.50 - 15V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 0.36A
- Maximum Discharging Current: 18A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 12V 1.3Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4501 |
|
- General
- Dimensions: 151L x 50W x 100H mm (including tabs)
- Weight: 1.75kg
- Capacity
- 20 Hour Rate (5.25V): 12Ah
- 10 Hour Rate (5.25V): 11Ah
- 1 Hour Rate (4.8V): 7.8Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 12MΩ
- Float Charging Voltage: 6.8 - 6.9V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 7.25 - 7.5V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 3.6A
- Maximum Discharging Current: 180A (5 sec.)
- Designed Floating Life: 5 years.
|
|
This 6V 12Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
 |
S4491 |
|
- Capacity
- 20 Hour Rate (5.25V): 4.5Ah
- 10 Hour Rate (5.25V): 4.2Ah
- 1 Hour Rate (4.8V): 2.95Ah
- Capacity Affected by Temperature
- 40°C: 102%
- 25°C: 100%
- 0°C: 85%
- -15°C: 65%
- Charging
- Internal Resistance: Approximately 25MΩ
- Float Charging Voltage: 6.8 - 6.9V @ 25°C (temperature compensation: -9mV/°C)
- Cyclic Charging Voltage: 7.25 - 7.5V @ 25°C (temperature compensation: -15mV/°C)
- Maximum Charging Current: 1.35A
- Maximum Discharging Current: 67.5A (5 sec.)
- Designed Floating Life: 5 years.
- General
- Dimensions: 70L x 47W x 107H mm (including tabs)
- Weight: 0.75kg
|
|
This 6V 4.5Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
 |
T5095A
|
|
- Suits large size 27M style batteries.
- Non-corrosive, high-density, reinforced, black polyethylene material is impervious to battery acid.
- Sturdy carry handles, and vented lid which has 4 recesses for battery leads.
- Webbing strap with adjustable quick release plastic buckle.
- Includes mounting cleats and stainless steel fasteners.
- Protect your boat & secure your battery in place.
- Easy to use and install.
|
|
A plastic battery box (27M style) to suit 90-100Ah batteries. Includes strap.
Outside box size: Length 410mm x Width 245mm x Height 265mm (including lid & handles). |
