|
Description |
Downloads |
Specs |
Ordering |
|
 |
M8916B |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- Compatible with Australian mains power point
|
|
6V DC Switchmode Plugpack Supplied with a fixed positive to tip 2.1mm DC jack. Compact design with high current regulated output. |
 |
M8980B |
|
- Voltage Input: 100-240V AC 60/50Hz
- Voltage Output: 3, 4.5, 5, 6, 7.5, 9 and 12V DC @ 1A
- Efficiency Level: V
|
|
A slim line multi-voltage plug pack with the adjustment switch on the side of the unit that faces the wall when installed. This prevents accidental change of output voltage which may cause damage to a connected appliance. |
 |
M8882A |
|
- Rapid charging with BC1.2 technology, power output up to 2.4A
- Innovative design for space saving, put your devices on top of charging station when charging
- Adjustable separators allows you to adjust the width needed for different devices
- Protection against over-charging, over-voltage, over-heating and short circuit
- Solid and stable base, it can support up to 10 devices
- 2 charging ports with QC3.0
- QC3.0 is backward compatible with Quick Charge 2.0
|
|
This 10 port USB charger allows you to charge up to 10 mobile devices at once. Ideal for workplaces, schools and large families. Keep everything charged up and ready to go. |
 |
P0698 |
|
- Input Voltage: 12V DC
- USB Output Voltage: 5V
- Product Switch Function: RESET/OFF
- Output: 15A 12V DC
- Product Size: 50 x 187 x 70 mm
- Mounting Hole Size: 14.6 x 2.9cm
- Voltmeter Test Range:6-30V
|
|
A flush panel mount facia with usb, car accessory and voltmeter with on/off switch |
 |
P0697 |
|
- Input Voltage: 12V DC
- USB Voltage: 5V
- Product Switch Function: RESET/OFF
- Output: 15A 12V DC
- Product Size: 50 x 130 x 70 mm
- Mounting Hole Size: 37 x 90mm
|
|
A flush panel mount facia with usb and car accessory with on/off switch |
 |
M8655 |
|
|
|
A 2m Anderson style cable fitted with USB type C Power Delivery Charger (18W) & USB QC 3.0 port for keeping devices charged in remote battery systems. |
 |
M8653 |
|
|
|
This Anderson style plug adaptor cable suits an Engel socket. |
 |
P8429 |
|
- Fitted with 3 pin mains connector.
- 2 metre length.
- 3 x 0.75mm2 conductors
- Pre-stripped bare end connection.
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
7.5A 3 pin 2m white, bare ends 6.4mm diameter. Energy Authority approved. |
 |
P8428 |
|
- Fitted with 3 pin mains connector.
- 2 metre length.
- 3 x 0.75mm2 conductors
- Pre-stripped bare end connection.
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
7.5A 3 pin 2m black, bare ends, 6.4mm diameter. Energy Authority approved. |
 |
P8431C |
|
- Fitted with IEC C7 connector and standard Australian 2 pin mains plug.
- Length: 0.75m
- 2 x 0.75mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
2 Pin to Figure 8 plug 5.0m. Energy Authority approved.
Ideal for installers when wall mounting televisions. |
 |
P8143 |
|
- Power supply: 250V a.c. 50Hz
- Rated Current: 10A
- Rated Output: 2500W
- Trip Leakage current: 30mA
- Trip time: <30mS
- Type of protection: IP40
|
|
A handy in-line connection residual current detection switch which measures for electrical leakage. |
 |
A0347 |
|
- Outlets work hidden behind equipment and cabinets!
- Outlet's channel is programmable (CH1-4)
- Multiple outlets can share the same channel to be controlled simultaneously
- Saves stand-by power
- Saves from your electricity bill
- Can be used in conjunction with a power board
- Built-in receiver memory stores data for up to 10 years
- Turn individual receivers on or off or a single button to turn all receivers on or off at the same time
|
|
Cut standby power usage around the home and office by switching appliances off at the wall via remote control. Easy inline connection between the GPO and your appliance |
 |
A0346 |
|
- Kit includes 1 RF remote + 1 outlets
- RF Remote control means line-of-sight is not necessary
- Outlets work hidden behind equipment and cabinets!
- Outlet's channel is programmable (CH1-4)
- Multiple outlets can share the same channel to be controlled simultaneously
- Saves stand-by power
- Saves from your electricity bill
- Can be used in conjunction with a power board
- Built-in receiver memory stores data for up to 10 years
- Turn individual receivers on or off or a single button to turn all receivers on or off at the same time
|
|
Cut standby 240V power usage around the home and office by switching appliances off at the wall via remote control. Easy inline connection between the GPO and your appliance |
 |
T5098
|
|
- Suits batteries up to 100Ah
- Dual 50A Anderson Plugs
- 12V Cigarette Socket
- 2 x 50A maxi blade fuses in circuit for extra protection.
- Lid with dual side clips for extra secure fit.
- Dual USB Ports with high current output (2 x 2.4A)
- Handy bar graph LED Voltmeter
- Circuit Breaker Switch
|
|
This 12V battery box features all the common connections that would typically be required for outdoor recreation power needs. |
 |
M8521A |
|
- Suitable for all 6V and 12V lead acid and gel batteries
- Suits battery recharging or maintenance (may be permanently connected).
- Protection against short circuit
- Ideal for battery storage or seldom used vehicles
- Light weight ‘plug in’ design
- Ring terminal or crocodile clip connection
|
|
This 6V/12V battery charger maintainer offers 600mA charging suitable for lead, gel cell and lead-acid batteries, including maintenance-free batteries. |
 |
S4565 |
|
- General
- Dimensions: 197L x 165W x 170H mm (including tabs)
- Weight: 14.6kg
- Charging
- 20 Hour Rate (10.5V): 50Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 9MΩ
- Max Discharge Current: 540A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: NB(F4)/IT(F8)
- Container Material: ABS
- Max Charge Current: 15A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 50Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4548 |
|
- General
- Dimensions: 151L x 98W x 98H mm (including tabs)
- Weight: 3.7kg
- Charging
- 20 Hour Rate (10.5V): 12Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 15MΩ
- Max Discharge Current: 165A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.3A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life and maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
 |
S4545 |
|
- General
- 151L x 65W x 119H mm (including tabs)
- Weight: 3.2kg
- Charging
- 20 Hour Rate (10.5V): 10Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 20MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 3.0A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 10Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4543 |
|
- General
- 151L x 65W x 100H mm (including tabs)
- Weight: 2.65kg
- Charging
- 20 Hour Rate (10.5V): 9Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 18MΩ
- Max Discharge Current: 135A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.52A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 9Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4539 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28m Ohm
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 6.3mm/F2
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 7Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
S4538 |
|
- General
- Dimensions: 151L x 65W x 102H mm (including tabs)
- Weight: 2kg
- Charging
- 20 Hour Rate (10.5V): 7Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 28MΩ
- Max Discharge Current: 70A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 2.1A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
Premium grade, long life, maintenance free sealed lead acid batteries. Cells are fully sealed to prevent leakage of electrolyte. |
 |
S4530 |
|
- General
- Dimensions: 134L x 67W x 66H mm (including tabs)
- Weight: 1.35kg
- Charging
- 20 Hour Rate (10.5V): 3.5Ah
- Cell Per Unit: 6
- Nominal Voltage: 12V
- Internal Resistance: Approximately 32MΩ
- Max Discharge Current: 54A (5s)
- Battery Life: 3-5 years (standby)
- Terminal Type: 4.8mm/F1
- Container Material: ABS
- Max Charge Current: 1.08A
- Charge Voltage: 14.4V to 15V
- Standby (float) Charge Voltage: 13.5V to 13.8V
- Ambient Temperature
- Charge: 0°C to 40°C
- Discharge: -15°C to 50°C
- Storage: -15°C to 40°C
|
|
This 12V 3.5Ah sealed lead acid (SLA) battery is a compact battery for powering 12V equipment. |
 |
M8942A |
|
- Australian standards compliant
- Suitable for a range of electronic devices
- MEPS approved.
|
|
Super-compact regulated power supplies. Supplied with 2.1mm DC jack. 100-240V AC input. Energy authority approved. MEPS approved. Requires P 8417 IEC lead. Dimensions: 167 x 65 x 40mm.
|
 |
P8440 |
|
- Fitted with IEC15 connector and 3 pin Australian mains plug.
- 1m metre length.
- 3 x 1mm2 conductors
- Electrical authority approved.
- AS/NZS standards compliant for connectors & cable.
|
|
IEC15 Female to 3 Pin 1m. Energy authority approved. |
 |
S4482 |
|
- Cell Per Unit: 3
- Nominal Voltage (V): 6
- Nominal Capacity (Ah): 1.3Ah @ 20hour rate F.V (1.75/Cell)
- Weight: Approx. 0.33kg
- Internal Resistance (1KHz): 38mΩ
- Max Discharge Current (5s): 19.5A (5s)
- Battery Life: Stand by 3~5 years
- Terminal Type: F1
- Container Material: ABS
- Charge 0°C to 40°C
- Discharge -15°C to 50°C
- Storage -15°C to 40°C
- Max Charge Current: 0.39A
- Charge Voltage: 7.2V to 7.5V
- Stand By: Charge Voltage: 6.75 to 6.90V
- Physical Size (mm): 97L x 25W x 57H mm (including tabs)
- Weight: 0.32kg
|
|
This 6V 1.3Ah sealed lead acid (SLA) battery is a compact battery for powering 6V equipment. |
