|
Description |
Downloads |
Specs |
Ordering |
|
|
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
|
A3242B NEW
|
|
- HDMI 2.0b and HDCP 2.2 compliant
- Supports 18Gbps video bandwidth
- Supports video resolution up to 4K/2K@60Hz RGB/YCBCR 4:4:4
- The transmission distance can be extended up to 70m via a single CAT6/6a cable
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG
- Support bi-directional IR control signal pass-through
- Audio formats: LPCM 7.1, Dolby True HD, DTS HD Master
- EDID copy pass-through function between the source device and display device
- Support ARC and audio de-embedding, audio is output through the optical fibre port of the receiver
- Support bi-directional POC (Power over Cable) function
- Compact design for easy and flexible installation
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
|
A3244B |
|
- HDBaseT single UTP
- Simultaneous HDMI, IR & RS-232 signal transmission
- HDCP compliant
- HDMI ARC and local audio extraction
- Transmitter or receiver unit can be powered via PoC
- Bi-directional IR transmission
- Supports 4K @ 60Hz 4:4:4 (70m max) when used with Cat6A/7
- Supports PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD.
|
|
This HDBaseT UTP balun allows transmission of 4K HDMI signals up to 70m with full audio-return-channel (ARC) support and RS-232 control signals. |
|
A3245 NEW
|
|
- Extend both HDMI signal plus USB peripherals.
- Transmission up to 70m over Cat6/6a UTP cabling.
- Ideal for remote operation of PC equipment.
- HDMI 2.0b, HDCP 2.2 compliant.
- 18Gbps video bandwidth.
- EDID management.
- Includes transmitter & receiver.
- Supports USB 1.1 KVM pass-through.
|
|
This product is designed to extend HDMI signals over distances up to 70m using Cat6/6a cabling. In addition it also allows USB peripherals to control a connected computer from the receiver end. |
|
A3247 NEW
|
|
- Supports four 4K @ 60Hz sources.
- Combines up to four sources onto one display.
- RS-232 controllable via third party software.
- Audio extraction via S/PDIF & stereo RCA.
- HDMI 2.0b, HDCP 2.2/1.x compliant.
- 18Gbps video bandwidth.
- Up to 8 display modes.
- Seamless display switching.
- EDID management.
- Includes IR remote.
|
|
This product is designed for the purpose of connecting four 4K @ 60Hz UHD HDMI sources, and displaying each on a single display |
|
A3443B |
|
- HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
- HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
- Four 18G HDMI 2.0 video outputs support up to 4K60 444 resolution
- Four outputs can be individually scaled for 4K - 1080p
- De-embedded audio to analog L/R and Coaxial ports output
- ARC audio return to the coaxial ports output only
- Built-in Web GUI for TCP/IP control
- Advanced EDID management supported
- Four methods of control: Front panel, RS-232, IR remote and TCP/IP
- Compact design for easy and flexible installation
|
|
This 4x4 HDMI 2.0 18Gbps Matrix Switcher can switch any of these 4 HDMI 2.0 Sources to four HDMI 2.0 Displays. |
|
A3502A |
|
- Integrates stereo composite signals from devices
- Convert a standard stereo composite signal into an integrated HDMI 1080p video and digital audio signal
- 3.5mm stereo audio and digital coaxial outputs provided
- Fitted with HDMI input and output
- Power supply included
|
|
An upscaler box for integrating stereo composite signals from devices such as CCTV cameras, older camcorders and AV equipment. Converts a standard stereo composite signal into an integrated HDMI 1080p video and digital audio signal. 3.5mm stereo audio and digital coaxial outputs provided. |
|
A3605 NEW
|
|
- Supports 4K @ 60Hz.
- As low as 100ms latency.
- Supports 20-60KHz IR remote extension.
- Supports USB KVM function.
- Up to 150m transmission line of sight.
- Auto channel selection.
- Equipped with 802.11ac 2T2R WiFi MIMO module.
- High-security protection.
- Supports one transmitter to multiple receivers.
- Supports HDCP2.2
|
|
This 4K wireless HDMI extender system supports 4K 60Hz resolutions with super smooth playback and low latency. You can now watch TV in your bedroom, study or any other room without messy cables. |
|
A3606 NEW
|
|
- General
- System Video Resolution: 4K60; 4K30; 4K24; 1080P60/50/30/24;1080i60/50; 720P/60/50/30 480P
- Audio: Stereo, 44.1KHz
- Wireless standard: IEEE 802.11b/g/n/ac, 2.4G/5GHz, 2T2R
- Latency: About 100ms latency
- HDMI Version: HDMI 2.0 with HDCP2.2
- Platform: supported Any devices that support HDMI Port
- Distance: ≈150m in the clear line of sight
- Receiver
- Interface: HDMI out x1; USB x 2; Type C x1
- LED: Blue LED x 1
- Power supply: DC5V/2.1A
- Power Consumption: About 5W
- Dimension: 154*77.5*21mm
- Weight: 330g
|
|
An additional receiver unit for the Dynalink A3605 4K wireless HDMI sender system. |
|
A3830B |
|
- Compliant with HDMI, HDCP 1.2 and DVI 1.0
- Supports HDMI audio sampling rate up to 192 kHz
- Supports Optical S/PDIF audio sampling rate up to 192 kHz
- HDMI supports high-bit-rate (HBR) audio
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Supports 4 x 3.5mm phone jack for analog multi-channel audio outputs
- Maximum input and output HDMI cable length can run up to 15 meters at 1080p 8-bit resolution or 10 meters at 1080p 12-bit resolution
- Supports built-in audio EDID switching among LPCM 7.1CH, TV (external) EDID, and Bitstream audio
- Supports CEC bypass
- Supports 4Kx2K resolution and 3D signal
|
|
Allows you to split the audio stream from a HDMI signal into either S/PDIF optical or four analog stereo 3.5mm jack outputs - ideal for 7.1 multi-channel systems. |
|
A3832 |
|
|
|
Ideal for use in educational or boardroom environments, this handy converter box provides connection for devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
|
A3833 |
|
- Allows 4 AV sources to be connected - analog AV, VGA+3.5mm audio, mini DisplayPort, HDMI and USB-C.
- Converts all inputs to HDMI output 4K/2K @ 60Hz.
- Charge device via USB type A or USB type C ports.
- Ethernet by-pass function
- Source auto-detect plus manual switch selection
- Includes power supply.
|
|
Ideal for use in educational or boardroom environments, this handy converter table box provides connection for AV devices with VGA/3.5mm audio, USB-C, Mini DisplayPort and HDMI connections and outputs to a HDMI equipped projector or display. |
|
AE1101 |
|
- Easy to Operate
- Wireless control
- Portable Design
- Supports iPhone, Android phone, other smart phones which with Bluetooth A2DP function
- Compatible with home stereos / speaker, car stereos, headphones that is with 3.5mm audio input
|
|
Add bluetooth wireless audio streaming to headphones, speakers or even vehicles. |
|
C0459 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
4 pin Neutrik Speakon connector mounted horizontally on a dual face wall plate. |
|
C9001C NEW
|
|
- Suits devices with 3.5mm TRRS jack
- In-built microphone with button for phone calls
- 1.2m cable
- High performance driver for great audio quality
- High gloss white finish
|
|
Lightweight universal earphones with in-line microphone and level controller. |
|
C9034A |
|
- Foldable Design
- 10-15m Working Range Distance
- Answer phone calls and talk
- 15 hours listening time
- Adjustable headband
- Silicone Headband for extra comfort
- Includes USB charging cable
- Includes 3.5mm to 3.5mm TRRS jack cable (for wired use)
- Can be used in planes with additional P 0318 airplane adapter.
|
|
These over ear headphones are not only super comfortable but they also deliver up to 18 hours of listening time. |
|
C9042 |
|
- Excellent noise isolation and comfort for long periods of use.
- USB powered RGB lighting effects.
- Dual 3.5mm jack connection.
- Single TRRS adapter included for game console use.
- Soft ear cushions
- Detachable/adjustable microphone
- 2.2m Cable Length
|
|
This USB/3.5mm dual jack gaming headset is ideal for users who love playing video games and want good sound, comfort for the long hours playing and the ability to talk through a microphone. |
|
C9044 |
|
- Bluetooth Version: V5.0
- Working Distance Range: 10m
- Frequency Range: 2.402GHz-2.480GHz
- Charging Time: About 3.5 Hours
- Talking/Music Time: About 16 Hours
- Supports: HSP, HFP, AVRCP, A2DP
- Transmitting Power: Class 2
- Standby time: ≥300 hours
|
|
These over ear bluetooth headphones are not only super comfortable but also offer up to 16 hours of listening time. |
|
C9046 |
|
- Excellent noise isolation and comfort for long periods of use.
- USB powered
- Soft ear cushions
- Built-in microphone
- 2m Cable Length
|
|
These on ear headphones are super comfortable, making them ideal for wearing whilst working at a computer. |
|
H8123 |
|
- Mounts To: Ceiling
- Screen Size: 37" to 90"
- Unit Depth: 210mm
- Max mounting dimensions: 800mm x 500mm
- Max Weight: 75kg
- Horizontal Adjustment: 130°
- Vertical Tilt Adjustment: 15°
- Distance from ceiling: 102.4cm - 122.4cm
|
|
Allows mounting of LCD screens from the ceiling, ideal for use in large areas such as waiting rooms & lobbies. Mounting height from ceiling can be varied from 102.4cm to 122.4cm. Cables can be run inside the bracket pole for a neat installation. |
|
H8126C |
|
- Low profile design - only 55mm deep!
- +3 to 15° tilt adjustment.
- 60° swivel adjustment.
- Plastic mount covers provide a neat & tidy finish.
- Cable management guides.
- Built in levelling adjustment.
- Makes easy forward or backward viewing angle adjustments for reduced glare and eye strain.
- Sturdy and durable steel construction.
|
|
This cantilever wall bracket is designed to mount flat or curved screens up to 60kg where quick screen adjustment is required. VESA compliant mounting dimensions from 300x300 to 800x400. +3° to -15° tilt adjustment is provided, plus swivel up to 60° in either horizontal direction. |
|
H8130A |
|
|
|
Designed to suit a majority of projector models on the market today. This all steel ball mount bracket allows 30 deg of adjustment either vertically or horizontally which is more than enough for most installations! |
|
H8131A |
|
|
|
Designed to suit a majority of projector models on the market today. This all steel ball mount bracket allows up 30 deg of adjustment either vertically or horizontally which is more than enough for most installations! |
|
H8133 |
|
|
|
For high ceilings, extension poles allow projector mounting surface to be adjusted. |
|
H8136 |
|
|
|
For high ceilings, extension poles allow projector mounting surface to be adjusted. |