|
Description |
Downloads |
Specs |
Ordering |
|
![A3218B HDMI & Infra-Red HDBaseT Cat5e/6 Extender UTP Balun](https://images.altronics.com.au/thb/a/A3218B.jpg) |
A3218B |
|
- 100m Range Max (depeding on cabling and resolution)
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz
- Supports 4K x 2K @ 60Hz
- Supports RS-232 signal bi-directional transmission, baud rate self-adaptive
- Supports LAN transmission wide band IR
|
|
Allows 1080p HDMI signals to be extended up to 100m from their source over a single Cat5e/6 cable, whilst retaining full high definition quality. Built in IR extender allows remote control of source devices. |
![A3215A HDMI & Infra-Red HDBaseT Cat5e/6 Extender UTP Balun](https://images.altronics.com.au/thb/a/A3215A.jpg) |
A3215A |
|
- 70m Range
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz (75m)
- Supports 4K x 2K @ 60Hz 24bit (50m CAT5e) (60m CAT6)
- Supports 3D passthrough
- Supports LPCM, DTS digital, Dolby Digital, DTS-HD, Dolby True HD
- Supports 3D
- Supports HDbaseT technology
- Bi-direction IR control (wide band, 20-60KHz)
- Bi-direction delivery of power over cable
- Supports EDID call back
- Supports CEC pass through
- Built-in ESD protection system
|
|
Utilises the latest HDBaseT technology to send full HD uncompressed HDMI signals over Cat 5e/6 cable. |
![A3244B HDMI & Infra-Red+ARC HDBaseT Cat5e/6 Extender UTP Balun](https://images.altronics.com.au/thb/a/A3244B.jpg) |
A3244B |
|
- HDBaseT single UTP
- Simultaneous HDMI, IR & RS-232 signal transmission
- HDCP compliant
- HDMI ARC and local audio extraction
- Transmitter or receiver unit can be powered via PoC
- Bi-directional IR transmission
- Supports 4K @ 60Hz 4:4:4 (70m max) when used with Cat6A/7
- Supports PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD.
|
|
This HDBaseT UTP balun allows transmission of 4K HDMI signals up to 70m with full audio-return-channel (ARC) support and RS-232 control signals. |
![A3242 HDMI & One Way Infra-Red Cat6 Extender UTP Balun](https://images.altronics.com.au/thb/a/A3242.jpg) |
A3242 |
|
- Extends HDMI signals over distances up to 60m at 4k@ 60Hz 4:4:4 resolutions.
- HDMI 2.0, HDCP 2.2 HDCP 1.4 and DVI 1.0 compliant
- Supports 18Gbps bandwidth
- Supports one HDMI loop output
- Supports one-way IR pass-through
- Supports HDR function
|
|
Designed to extend HDMI signals over distances up to 60m across economical UTP cabling. |
![A3242A HDMI & One Way Infra-Red Cat6 Extender UTP Balun](https://images.altronics.com.au/thb/a/A3242A.jpg) |
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
![P7958A HDMI 2.0 to Flylead Clipsal Style Clip-In Mechanism](https://images.altronics.com.au/thb/p/P7958.jpg) |
P7958A |
|
|
|
Fitted with HDMI 2.0 sockets on both ends. 150mm fly lead |
![P5971 HDMI 3.5mm Single Wallplate with Flyleads](https://images.altronics.com.au/thb/p/P5971.jpg) |
P5971 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HDMI high speed with Ethernet (1.4) connection and 3.5mm stereo. Supplied with two facia covers to suit your decor. |
![A3830B HDMI Audio Extractor 2CH/7.1CH](https://images.altronics.com.au/thb/a/A3830B.jpg) |
A3830B |
|
- Compliant with HDMI, HDCP 1.2 and DVI 1.0
- Supports HDMI audio sampling rate up to 192 kHz
- Supports Optical S/PDIF audio sampling rate up to 192 kHz
- HDMI supports high-bit-rate (HBR) audio
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Supports 4 x 3.5mm phone jack for analog multi-channel audio outputs
- Maximum input and output HDMI cable length can run up to 15 meters at 1080p 8-bit resolution or 10 meters at 1080p 12-bit resolution
- Supports built-in audio EDID switching among LPCM 7.1CH, TV (external) EDID, and Bitstream audio
- Supports CEC bypass
- Supports 4Kx2K resolution and 3D signal
|
|
Allows you to split the audio stream from a HDMI signal into either S/PDIF optical or four analog stereo 3.5mm jack outputs - ideal for 7.1 multi-channel systems. |
![P7962A HDMI Back To Back Mechanism 90°](https://images.altronics.com.au/thb/p/P7962A.jpg) |
P7962A |
|
|
|
Double sided pluggable design for connection with pre-made leads. Suits Clipsal & regular wallplates. HDMI V2.0 |
![P6616A HDMI Cable Joiner](https://images.altronics.com.au/thb/p/P6616.jpg) |
P6616A |
|
|
|
HDMI to HDMI cable joiner. |
![P7960 HDMI Clipsal Clip-In Mechanism](https://images.altronics.com.au/thb/p/P7960.jpg) |
P7960 |
|
|
|
Double sided pluggable design for connection with pre-made leads. Horizontal entry. |
![A3145 HDMI Over Ethernet UTP 4 Port Balun Receiver](https://images.altronics.com.au/thb/a/A3145.jpg) |
A3145 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. It can also be used as a simple point to point extender. |
![A3144 HDMI Over Ethernet UTP 4 Port Balun Transmitter](https://images.altronics.com.au/thb/a/A3144.jpg) |
A3144 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. |
![A3141 HDMI Over Ethernet UTP Balun Receiver](https://images.altronics.com.au/thb/a/A3141.jpg) |
A3141 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
![A3140 HDMI Over Ethernet UTP Balun Transmitter](https://images.altronics.com.au/thb/a/A3140.jpg) |
A3140 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
![A3218C HDMI over HDBaseT Extender with IR](https://images.altronics.com.au/thb/a/A3218C.jpg) |
A3218C |
|
- Compact design for easy and flexible installation
- HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant.
- Supports 18Gbps video bandwidth.
- Single Cat5e/6 cable transmission: 120m @ 4K2K, 150m @ 1080p.
- HDMI loop output on transmitter
- Analogue 3.5mm stereo output on receiver
- Bi-directional IR control (two targets and two emitters included)
- RS232 pass-through
- CEC pass-through
- HDR, HDR10+, Dolby Vision and HLG support
- Supports PoC (Power over Cable)
|
|
This 18Gbps HDMI Extender can extend high definition video / audio signal, RS-232, bi-directional IR, and the distance is up to 492ft / 150 meters between transmitter and receiver via a single CAT cable. |
![A3139A HDMI Over IP Extender Cat5e/6 Receiver](https://images.altronics.com.au/thb/a/A3139A.jpg) |
A3139A |
|
- HDCP 1.4 complaint
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
![A3138A HDMI over IP Extender Cat5e/6 Transmitter](https://images.altronics.com.au/thb/a/A3138A.jpg) |
A3138A |
|
- HDCP 1.4 compliant
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
![P7355A HDMI Plug to DVI-D Socket Adapter](https://images.altronics.com.au/thb/p/P7355.jpg) |
P7355A |
|
|
|
HDMI Plug to DVI-D socket adaptor. |
![A3124 HDMI Repeater](https://images.altronics.com.au/thb/a/A3124.jpg) |
A3124 |
|
|
|
A compact, single box solution for extending HDMI lead lengths. Simply plugs in line and boosts signal allowing lead lengths up to 25m. Ideal for situations where home theatre equipment is located remotely from the screen or projector. HDCP 2.2/1.4 compliant.
|
![A1127A HDMI RF Digital DVB-T Modulator](https://images.altronics.com.au/thb/a/A1127A.jpg) |
A1127A |
|
- 1080p modulated resolution
- HDMI loop through
- 1080 HDMI input
- H.264 video compression
- 30dB MER (typical)
- 100BuV ±5 output level
- RF TV antenna input
- 38-56kHz IR frequency
- 9V IR pass over RF
- Includes power supply
|
|
A high performance HD modulator for HDMI sources with IR return path and HDMI loop through. |
![A1129A HDMI RF Digital DVB-T Modulator with 4K Loop Output](https://images.altronics.com.au/thb/a/A1129A.jpg) |
A1129A |
|
- 1080p modulated resolution
- HDMI 4K pass through
- H.264 video compression
- 30dB MER (typical)
- 100dB output level
- RF TV antenna input
- 177-858MHz frequency
- Includes power supply
|
|
A high performance HD modulator module able to generate a signal in DVB-T format (Digital Terrestrial Television) from HDMI input. |
![P7370A HDMI Right Angle Male To Female Adapter](https://images.altronics.com.au/thb/p/P7370A.jpg) |
P7370A |
|
|
|
Right Angle HDMI Adaptor. Downward direction adaptor. |
![P7371A HDMI Right Angle Up Male To Female Adapter](https://images.altronics.com.au/thb/p/P7371A.jpg) |
P7371A |
|
|
|
Right Angle HDMI Adaptor. Upward direction adaptor. |
![PB5970 HDMI Single Black Wallplate with Flyleads](https://images.altronics.com.au/thb/p/PB5970.jpg) |
PB5970 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Flylead Wallplate fitted with HDMI high speed with Ethernet (1.4) connection. Supplied with two facia covers to suit your decor. |