|
Description |
Downloads |
Specs |
Ordering |
|
 |
A2856A |
|
- USB PVR ready for recording
- MPEG-4 AVC/H.264 HP@L4
- Favourite service list editing
- Parental lock facility
- Supports teletext
- IR remote control
- Fully DVB-T compliant
- HDMI cable included
- HDMI and composite outputs
- 7-day electronic program guide (EPG)
- Multi-language subtitle output supported
|
|
This HD set top box features composite and HDMI outputs for HD televisions or connection to a PC monitor or projector.
|
 |
AE1101 |
|
- Easy to Operate
- Wireless control
- Portable Design
- Supports iPhone, Android phone, other smart phones which with Bluetooth A2DP function
- Compatible with home stereos / speaker, car stereos, headphones that is with 3.5mm audio input
|
|
Add bluetooth wireless audio streaming to headphones, speakers or even vehicles. |
 |
A1103B |
|
- Low latency ensures video signal matches audio signal
- Perfect for transmitting TV audio to headphones/active speakers etc.
- Bluetooth 4.2+EDR
- Transmit to two Bluetooth devices at once
- Inbuilt lithium battery for portable use
- Includes USB charging / power lead, 3.5mm cable & Dual RCA to 3.5mm cable
- Playing time up to 8 hours
- Supports A2DP & AVRCP
protocols.
|
|
Bluetooth Audio Transmitter and Receiver. Send TV audio to your headphones! Transmits or receives audio via Bluetooth 4.1. Can be powered via USB on your TV (cable included). Uses low latency technology so theres no lip sync issues! Includes 3.5mm & RCA cables. |
 |
L2003
|
|
- Provides crystal clear reception in mobile vehicles
- Housing is completely waterproof
- Constructed from UV resistant ASA plastic for long term durability
- Comes complete with power supply, cables, connectors and fitting instructions
- Easy to assemble
|
|
This outdoor antenna is a must have for your caravan, RV or boat. It provides crystal clear reception in mobile vehicles. |
 |
A1107A |
|
- Bluetooth chip: CSR8675
- Bluetooth supports profiles: RX: A2DP AVRCP TX: A2DP
- Operational Range: >80m (straight line transmission without occlusion)
- Battery: 1000MA
- Working Time: RX>20H, TX average>15H
- Charging Time: 4.5H
- Input voltage/current: DC 5V
- Input/output connection: SPDIF, 3.5mm stereo audio jack
- Audio CODEC: aptX HD, aptX Low Latency, apex, SBC
|
|
Operates both as a transmitter and receiver, allowing you to send music from your phone for playback through an amplifier or powered speakers OR to transmit audio from a non-bluetooth device to Bluetooth headphones or amplifier/ receiver. |
 |
A1112 |
|
- Ultra slim design, perfect for Nintendo Switch.
- Send audio to two pairs of Bluetooth headphones at once.
- No external battery required, powered from USB port.
- USB type C or type A connection (with use of included adaptor).
- Low power consumption.
|
|
The Gulikit Route Air is an ultra thin USB C type Bluetooth transmitter adapter is suitable for use with Nintendo Switch, PS4, PC and laptops. |
 |
P6821A |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
Quality Pro series wall plates with gold plated RCA sockets. Supplied with dual covers |
 |
A1111 |
|
|
|
This Bluetooth wireless audio adapter is designed to allow you use of your wireless bluetooth headphones in commercial airplanes. It features a dual 3.5mm plug which plugs into the armrest. |
 |
A2809A |
|
- Fully DVB-T compliant
- USB PVR ready for recording
- MPEG-4 AVC/H.264 HP@L4
- HDMI cable included
- Parental lock facility
- Supports teletext
- IR remote control
- 240V plugpack included
- HDMI and composite outputs
- 7-day electronic program guide (EPG)
- Multi-language subtitle output supported
- 12V DC operation suitable for use in vehicle
|
|
This 12V DC Powered HD set top box is great for caravans, RVs and vehicles. Incredibly compact, under 12cm wide! |
 |
A2696 |
|
- DAB+ band III digital tuner and analog FM tuner
- UPnP compatible - play music from PC’s on your network
- Internet radio station streaming
- USB playback
- MP3, AAC+, WMA-9 playback
- Wired or wireless 802.11b/g
- Includes remote control
|
|
Access over 14,000 internet radio stations & podcasts from around the world, sorted by country and genre. This standalone device requires only an internet connection (no computer required). |
 |
A2696A |
|
- High quality 430mm metallic cabinet
- Aluminium front panel
- Wifi and Ethernet RJ45 connection
- DAB+/DAB/FM/Bluetooth
- 2.4" TFT display
- External wireless antenna for extended range - RCA analogue out
- Optical and coaxial output
- 6.35mm stereo jack
- Remote control
|
|
Upgrade your digital radio experience with this Internet Radio with Wi-Fi and DAB+. The tuner is an outstanding digital radio with a premium design and finely tuned audio performance. |
 |
A1012A |
|
- Combines 6 remotes into 1
- Easy setup
- Simplified design and functionality
- Flexible learning replication function
- Preset color keys
- Exclusive ergonomic comfort-fit design
|
|
A stylish slimline remote control designed to replace and combine your existing remotes. |
 |
P6810A |
|
|
|
Plastic wallplate fitted with gold plated binding posts for speaker connect points. |
 |
L2004
|
|
- Sturdy construction - Dipole fixed to boom in two places
- Long clearance boom to prevent mast interference
- Tight frequency response across the DAB+ channels
- Also suits FM radio signal reception
- Vertically mounted
|
|
A high performance antenna designed specifically for DAB+ digital radio reception in digital reception areas. Fitted with F-type balun, UV stabilised plastic parts and heavy duty bifurcated rivets for long life. VHF band III channels 6-12. Length: 670mm. |
 |
L2062A |
|
- Frequency Range 174-230 MHz & 520-694 MHz
- 35dB UHF Maximum Gain
- 26dB VHF Maximum Gain
- 15dB Gain Control for UHF
- 16-12dB Tilt Control for VHF
- Separate VHF & UHF Inputs or Combined Input
- FM Radio 88-108 MHz Pass Through Selectable
- 4G/LTE Filtering
- Weatherproof Housing
- High Output Figure of 108dB IMR3 (DIN45004B)
- Connectors: F-Type
- Power Consumption: 80mA
- Suitable Power Supply: PSK06 Series or PSK08 Series
|
|
As the name suggests, this amplifier is mounted on the antenna mast (as close to the antenna as possible) to avoid any signal loss from the connecting cable. It has inputs for a separate VHF or UHF antenna or a combined input for both. Signal balance is a |
 |
H8186 |
|
|
|
Steel powder coat adaptor plate with holes to suit standard VESA mount LCD screens and projectors
- 50x50
- 75x75
- 100x100
- 200x100
- 200x200 |
 |
A3199A |
|
- For this device to work, the audio settings on a DVD / Blu-ray must be changed to output a lossless PCM digital signal to the coaxial and / or optical outputs. It will not work if another output format is used e.g. Dolby, DTS HD. Supports Digital Audio Format: LPCM (Linear Pulse Code Modulation). LPCM is part of the international standards for DVD, Blu-ray and HDMI. With any setting other than PCM, the signal error LED will light up. With audio output parameters set to PCM, the device will convert a digital 5.1 surround signal input to analogue stereo output from the device, and then into an A/V receiver amplifier or stereo system.
|
|
Converts a digital audio output (from a DVD player, set top box etc) into a standard stereo line level signal for connection to a stereo or commercial amplifier system. Both coaxial and optical (Toslink) input connections are provided. |
 |
A3830B |
|
- Compliant with HDMI, HDCP 1.2 and DVI 1.0
- Supports HDMI audio sampling rate up to 192 kHz
- Supports Optical S/PDIF audio sampling rate up to 192 kHz
- HDMI supports high-bit-rate (HBR) audio
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Supports 4 x 3.5mm phone jack for analog multi-channel audio outputs
- Maximum input and output HDMI cable length can run up to 15 meters at 1080p 8-bit resolution or 10 meters at 1080p 12-bit resolution
- Supports built-in audio EDID switching among LPCM 7.1CH, TV (external) EDID, and Bitstream audio
- Supports CEC bypass
- Supports 4Kx2K resolution and 3D signal
|
|
Allows you to split the audio stream from a HDMI signal into either S/PDIF optical or four analog stereo 3.5mm jack outputs - ideal for 7.1 multi-channel systems. |
 |
A3217D |
|
- Transmits up to 70m without signal loss
- One-way IR signal transmission
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Compact design for discrete and flexible installation
- Supports cascading via additional HDMI loop out
- Supports video resolution up to 4k2k@30Hz YUV 4:4:4
- Supports copying EDID from receiver display or loop out display
- Supports Power over Cable (from transmitter to receiver)
|
|
This extender can send HD video/audio signal and IR control up to 70m@1080p, and 40m@4K30 resolution via a single CAT5e/6 cable with zero-delay and uncompressed transmission. The HDMI loop output can be cascaded to the next extender, supporting resolution up to 4K@30Hz. |
 |
A3831 |
|
- Compliant with HDMI 2.0b, HDCP 2.2 and DVI
- Supports HDMI Video resolution up to 4K2K@60Hz YUV4:4:4
- Extracts HDMI Audio to multi-channel optical (SPDIF) or L/R analog audio
- Optical audio supports LPCM 2CH, Dolby Digital 2/5.1CH, DTS 2/5.1Ch
- Supports HDMI Hight bit Rate audio pass through
- Audio Sample rates up to 192kHz
- 10bits HDR (high dynamic range) pass through
- Supports CEC bypass
|
|
With the help of this audio extractor you can extract audio signals from any HMDI compliant source to digital optical or analog stereo audio outputs. |
 |
C9041A |
|
- Case provides up to 3 recharges for the earbuds
- Active noise cancelling circuitry
- 4 hours of listening
- Touch sensitive controls to play/pause and track controls
- Access to Siri/Google voice assistant and phone call control
- Can be recharged via Qi wireless charging pads
- Includes charging cable and 3 pairs of silicon ear tips
|
|
True wireless earbuds with the latest in active noise cancelling circuitry for immersive sound in noisy environments. Pull them out of the case and they automatically connect to your phone for instant listening for up to 4 hours. |
 |
A1127A |
|
- 1080p modulated resolution
- HDMI loop through
- 1080 HDMI input
- H.264 video compression
- 30dB MER (typical)
- 100BuV ±5 output level
- RF TV antenna input
- 38-56kHz IR frequency
- 9V IR pass over RF
- Includes power supply
|
|
A high performance HD modulator for HDMI sources with IR return path and HDMI loop through. |
 |
C9032A |
|
- Bluetooth V5.0+EDR
- 12m transmission range
- Protective charging case
- 3-4 hours of listening time per charge
- True wireless design
- Phone call controls via touch interface button
- Play/pause controls via touch interface button
|
|
Styled on the popular Airpods these affordable wireless Bluetooth 5.0 earbuds offer great sound for less! Each pair includes a magnetic battery storage case to protect your ear buds, but also keep them charged up and ready to go whenever you need them. |
 |
A3127 |
|
- Easy to Install in seconds, no fiddly settings.
- Full 3D and 4Kx2K resolution.
- 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
- 12bit per channel (36bit all channel) deep color.
- Compatible with uncompressed audio such as LPCM
- Compatible with compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD).
|
|
Allows the connection of a single HDMI source to two HDMI displays with no loss of signal quality. Suitable for home theatre, conference centres, sports bars, concerts, board rooms,etc. Multiple splitter units may be daisy chained together. |
 |
P5970 |
|
- The Dynalink AV wallplate is a custom made design produced by a local plastics manufacturer. The design is unique in that it allows different facia plates to be fitted to match existing decor. Plates are CNC routed in house and assembled by Altronics staff in Perth. Read more about our Australian Made products
|
|
HDMI wallplate with flylead connections. Fitted with dual HDMI high speed with Ethernet connection. Supplied with two facia covers to suit your decor. |
