|
Description |
Downloads |
Specs |
Ordering |
|
|
A3106 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4
- 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for two HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any two display devices. It supports video resolution up to 8K@60Hz 4:2:0. |
|
A3107 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- Built-in Equalizer, Retiming and Driver
- Advanced EDID management
- Support audio de-embedding function (output through the optical and analog port)
- Compact design for easy and flexible installation for four HDMI outputs
- HDMI daisy chain several splitters - up to 4 levels.
|
|
This splitter can distribute one HDMI source signal to any four display devices. |
|
A3109 NEW
|
|
- HDMI 2.1 and HDCP 2.3 compliant
- 40Gbps video bandwidth
- Supports video resolution up to 8K@60Hz 4:2:0 10bit, 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit
- VRR, FVA, ALLM supported
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Support HDMI audio formats: LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
- INPUTS 1 port and OUT 1 port support eARC/ARC function
- Allows HD audio up to Dolby Atmos, DTS:X over TrueHD from ANY external HDMI source to any eARC/ARC sound system
- Support audio de-embedding function (output through the optical and analog port)
- Built-in EDID DIP switch supports advanced EDID management
- 8K->4K, 8K/4K->2K downscaler support
- Support IR remote control and front panel button switching
- Built-in Equalizer, Retiming and Driver
- Compact design for easy and flexible installation
|
|
Allows four HDMI 8K V2.1 sources to be switched to two outputs/screens. This compact switcher brings together your HDMI sources for easy switching via front panel or IR remote control. |
|
A3110 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
|
A3111 NEW
|
|
- Extend both HDMI signal plus IR control & USB peripherals
- Transmission up to 150m over Cat6/6a UTP cabling
- Ideal for remote operation of PC equipment
- HDCP 1.4 compliant
- 6.75Gbps video bandwidth
- H.265 encoding/decoding
- Supports USB 1.1 KVM pass-through
- Supports standard 1000MBps network switch/router
|
|
Designed to extend HDMI signals over distances up to 150m using Cat6/6a cabling. |
|
A3112 |
|
- 1 input / 2 outputs.
- HDMI 2.0b, HDCP2.2/1.4 compliant.
- Maximum HDMI resolution up to 4K2K@50/60Hz (4:4:4).
- Supports digital & analog audio extraction from HDMI source.
- Supports output bypass and 4K to 1080P downscaling.
|
|
Designed to split a single HDMI source into four HDMI outputs. |
|
A3114 |
|
- 1 input / 4 outputs.
- HDMI 2.0b, HDCP2.2/HDCP1.4 compliant.
- Maximum HDMI resolution up to 4K2K@50/60Hz (4:4:4).
- Supports digital & analog audio extraction from HDMI source.
- Supports output bypass and 4K to 1080P downscaling.
|
|
Designed to split a single HDMI source into four HDMI outputs. |
|
A3124 |
|
|
|
A compact, single box solution for extending HDMI lead lengths. Simply plugs in line and boosts signal allowing lead lengths up to 25m. Ideal for situations where home theatre equipment is located remotely from the screen or projector. HDCP 2.2/1.4 compliant.
|
|
A3126 |
|
|
|
Accepts one stereo audio & composite or S-video signal and distributes it to four outputs. Suitable for domestic or commercial use in showrooms, pubs, clubs, cafes, TABs, etc. Gold RCA connections. |
|
A3127 |
|
- Easy to Install in seconds, no fiddly settings.
- Full 3D and 4Kx2K resolution.
- 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
- 12bit per channel (36bit all channel) deep color.
- Compatible with uncompressed audio such as LPCM
- Compatible with compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD).
|
|
Allows the connection of a single HDMI source to two HDMI displays with no loss of signal quality. Suitable for home theatre, conference centres, sports bars, concerts, board rooms,etc. Multiple splitter units may be daisy chained together. |
|
A3128A |
|
|
|
Allows the connection of a single HDMI source to two HDMI displays with no loss of signal quality. Uses include home theatre, conference centres, sports bars, concerts, board rooms,etc. Multiple splitter units may be daisy chained together. |
|
A3133B |
|
|
|
A compact, single box solution for extending HDMI lead lengths. Simply plugs in line and boosts signal allowing lead lengths up to 50m. Ideal for situations where home theatre equipment is located remotely from the screen or projector.
|
|
A3134E |
|
- Supports full 3D video format
- Displays an Ultra HD source on up to two Ultra HD displays
- Support high resolution up to 3840X2160@60Hz
- Supports four kinds of EDID handling abilities
- Supports HDCP2.2/1.4 Compliant
- Supports 36 bit deep colour
- Supports LPCM 7.1 Dolby True HD, Dolby Digital Plus and DTS-HD Master Audio
- Bandwidth 18G
- Supports HDR
- Supports online firmware upgrade via Micro USB Port
|
|
Allows the connection of a single HDMI source to multiple HDMI displays with no loss of quality. |
|
A3135F |
|
- Simultaneously displays an UItra Hi-Def source on up to four UItra HD displays
- Video Resolutions up to UItra HD 4Kx2K (3840x2160p)@60Hz YUV 4:4:4
- Three kinds of EDID handling abilities
- HDCP2.2/1.4 Compliant
- 36 bit Deep Color
- LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio
- Bandwidth 18Gbps
- Supports HDR
- Online firmware upgrade via Micro USB Port
|
|
This is a high performance 1x HDMI input to 4x HDMI output switcher which is powered via a USB port. |
|
A3135G NEW
|
|
- Simultaneously displays an UItra Hi-Def source on up to four UItra HD displays
- Video Resolutions up to UItra HD 4Kx2K (3840x2160p)@60Hz YUV 4:4:4.
- Three kinds of EDID handling abilities
- HDCP2.2/1.4 Compliant
- 36 bit Deep Color
- LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio
- Bandwidth 18Gbps
- Supports HDR
|
|
This is a high performance 1x HDMI input to 4x HDMI output switcher which is powered via a USB port. |
|
A3136C |
|
- Simultaneously displays an UItra Hi-Def source on up to eight UItra HD displays
- Supports resolutions up to UItra HD 4Kx2K(3840x2160@60Hz YUV 4:4:4)
- Supports three kinds of EDID handling abilities.
- Supports HDCP2.2/1.4 Compliant
- Supports 36 bit Deep Color
- Supports LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio.
- Supports 3D
- Bandwidth 18G
- Supports HDR
- Supports online firmware upgrade via Micro USB Port
|
|
Allows the connection of multiple HDMI displays to a single HDMI source with no loss of signal quality. This splitter is ideally used for conference centres, sports bars, concerts, board rooms and other distributed AV applications where multiple displays are required. |
|
A3136D NEW
|
|
- HDCP 2.2 compliant
- Supports 18Gbps bandwidth
- Supports resolution up to 4K@60Hz 4:4:4
- Supports HDR function
- Supports COPY/AUTO EDID control via dialling the DIP switch
- Compact design for easy and flexible installation
|
|
Allows the connection of multiple HDMI displays to a single HDMI source with no loss of signal quality. |
|
A3138A |
|
- HDCP 1.4 compliant
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
|
A3139A |
|
- HDCP 1.4 complaint
- Supports 6.75Gbps video bandwidth
- Video resolution is up to 1920x1200@60Hz YCbCr 4:4:4
- Extend distance up to 150m between encoder and decoder via Cat5e/6 cable
- Adopts Standard H.265 encoding/decoding
- Supports 1G standard IP switcher / router / hub
- Supports one-way IR control signal transmission
- Compact design for easy and flexible installation
|
|
HDMI Over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard 1G network switcher, and extends distance up to 150m between transmitter and receiver via a Cat5e/6 cable. |
|
A3140 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
|
A3141 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This HDMI transmitter and receiver system can be used as a simple point to point extender or integrated into an existing home or business ethernet system enabling several receivers to be connected to one transmitter. |
|
A3144 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. |
|
A3145 |
|
- Compliant HDCP 1.2
- Uses off-the-shelf gigabit IP switches for extension and distribution
- Extends 1080p HDMI signals up to 120m over a single UTP Cat5e/6 cable
- Flexible and scalable HDMI 1080p Video Wall Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, adding more displays without adding LAN bandwidth loading
- Support Point-to-Point, Point-to-Many and Many-to-Many network configuration
- With IR Control function ,it allows you control back the source at the end of destination
- Maximum 3 layers of ethernet switches could be passed through
- Foxtel/IQ compatible
|
|
This series of balun components has an important difference to most HDMI balun products on the market in that it can send HDMI signals over ethernet switches, allowing HDMI sources and displays to be connected in an expandable network. It can also be used as a simple point to point extender. |
|
A31489 |
|
|
|
This HDMI over IP Extender uses advanced H.264 compression type which transfers signal using lower bandwidth thus transmit more smoothly. It supports 120m over single Cat5E/6 cable at point to point. Includes transmitter and receiver. |
|
A3198A |
|
- Converter Type: Analog to Digital Converter
- Digital Output Type: Coaxial (RCA), Optical (Toslink)
- Digital Audio Output Format: LPCM (Linear Pulse Code Modulation)
- Input Impedance: 47K ohms
- Minimum Load Impedance: 75 ohms
- Input Voltage: 5V DC
|
|
Converts an analog audio output (from any standard line level source) into a digital audio signal for connection to a commercial amplifier or distribution system. Both coaxial and optical (Toslink) input connections are provided. |
|
A3199A |
|
- For this device to work, the audio settings on a DVD / Blu-ray must be changed to output a lossless PCM digital signal to the coaxial and / or optical outputs. It will not work if another output format is used e.g. Dolby, DTS HD. Supports Digital Audio Format: LPCM (Linear Pulse Code Modulation). LPCM is part of the international standards for DVD, Blu-ray and HDMI. With any setting other than PCM, the signal error LED will light up. With audio output parameters set to PCM, the device will convert a digital 5.1 surround signal input to analogue stereo output from the device, and then into an A/V receiver amplifier or stereo system.
|
|
Converts a digital audio output (from a DVD player, set top box etc) into a standard stereo line level signal for connection to a stereo or commercial amplifier system. Both coaxial and optical (Toslink) input connections are provided. |
|
A3205 |
|
|
|
Converts optical toslink audio input to a Coaxial SPDIF Digital audio output.
Requires 6 Volt dc input M 8916 plugpack with M9188 tip. |
|
A3207 |
|
|
|
Supplied as a pair, these handy bi-directional audio extender allow you to send stereo audio signals over long distances using economical UTP cable (Cat5/5e/6). Ideal for connecting an audio source to an amplifier in another room. Maximum distance 75m. |
|
A3209 |
|
|
|
Supplied as a pair, these handy bi-directional extenders allow you to send stereo audio signals over long distances using economical UTP cable (Cat5/5e/6). Ideal for connecting an audio source to an amplifier in another room. Maximum distance 75m. |
|
A3210 |
|
- Distance over Cat 5e/6 cabling:
- 480p video: 100m
- 720p video: 75m
- 1080i video: 50m
- Digital audio: 100
|
|
Permits audio & video transmission over Cat 5/6 cable. Applications include LCD monitors, plasma screens & projectors. 4 x RCA inputs & RJ45 connection. No power required. Transmission distance up to 100m depending on resolution required. Two units are required to form a link. Sold individually. |
|
A3212 |
|
|
|
Provides automatic switching between 4 S/PDIF digital audio sources. Supports common audio formats. Single S/PDIF output. Includes power supply. |
|
A3214 |
|
- Send mono or stereo audio signals over distances up to 670m
- No power required
- Four channel mono or two channel stereo
- Compact design with simple point to point set up
- Great for distributed audio systems where audio sources are located remotely
- Can be used in commercial or domestic audio systems.
|
|
This compact box converts four RCA audio signals into a UTP RJ45 output for transmission over long distance (up to 670m). May be used for two stereo signals or four mono signals. Ideal for domestic and commercial audio systems requiring audio source. |
|
A3215A |
|
- 70m Range
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz (75m)
- Supports 4K x 2K @ 60Hz 24bit (50m CAT5e) (60m CAT6)
- Supports 3D passthrough
- Supports LPCM, DTS digital, Dolby Digital, DTS-HD, Dolby True HD
- Supports 3D
- Supports HDbaseT technology
- Bi-direction IR control (wide band, 20-60KHz)
- Bi-direction delivery of power over cable
- Supports EDID call back
- Supports CEC pass through
- Built-in ESD protection system
|
|
Utilises the latest HDBaseT technology to send full HD uncompressed HDMI signals over Cat 5e/6 cable. |
|
A3217D |
|
- Transmits up to 70m without signal loss
- One-way IR signal transmission
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Compact design for discrete and flexible installation
- Supports cascading via additional HDMI loop out
- Supports video resolution up to 4k2k@30Hz YUV 4:4:4
- Supports copying EDID from receiver display or loop out display
- Supports Power over Cable (from transmitter to receiver)
|
|
This extender can send HD video/audio signal and IR control up to 70m@1080p, and 40m@4K30 resolution via a single CAT5e/6 cable with zero-delay and uncompressed transmission. The HDMI loop output can be cascaded to the next extender, supporting resolution up to 4K@30Hz. |
|
A3218B |
|
- 100m Range Max (depeding on cabling and resolution)
- HDBaseT single UTP
- HDCP compliant
- Transmitter or receiver unit can be powered via PoE
- Supports uncompressed HDMI signal
- Supports 1080p @ 60Hz
- Supports 4K x 2K @ 60Hz
- Supports RS-232 signal bi-directional transmission, baud rate self-adaptive
- Supports LAN transmission wide band IR
|
|
Allows 1080p HDMI signals to be extended up to 100m from their source over a single Cat5e/6 cable, whilst retaining full high definition quality. Built in IR extender allows remote control of source devices. |
|
A3218C |
|
- Compact design for easy and flexible installation
- HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant.
- Supports 18Gbps video bandwidth.
- Single Cat5e/6 cable transmission: 120m @ 4K2K, 150m @ 1080p.
- HDMI loop output on transmitter
- Analogue 3.5mm stereo output on receiver
- Bi-directional IR control (two targets and two emitters included)
- RS232 pass-through
- CEC pass-through
- HDR, HDR10+, Dolby Vision and HLG support
- Supports PoC (Power over Cable)
|
|
This 18Gbps HDMI Extender can extend high definition video / audio signal, RS-232, bi-directional IR, and the distance is up to 492ft / 150 meters between transmitter and receiver via a single CAT cable. |
|
A3221A |
|
- Huge 300m range over a single solid core Cat5e/cat6 cable
- Support for up to 1900 x 1200 resolution
- SVGA and RJ45 output on the transmitter unit.
- Compatible with any TV, monitor or projector with a VGA output.
|
|
Permits audio & video transmission over Cat 5e/6 cable. |
|
A3224 |
|
|
|
An ideal solution for pubs, clubs and venues, this HDMI extender system allows a single HDMI source to be shared across multiple screens located up to 30m away with Cat5e and 50m with Cat6. |
|
A3225 |
|
|
|
Transceiver for use with our A3224 multi-zone HDMI extender system. This unit not only acts as a receiver for the incoming signal from the A3224 transmitter but also retransmits the signal so it can be daisy chained with up to 6 additional screens. |
|
A3226 |
|
|
|
Receiver for use with the A 3224 HDMI Extender Kit and the A 3225 HDMI Extender Tranceiver. For multiple screens daisy chained from a single signal source use up to 6 tranceivers with a receiver at the very end. |
|
A3242 |
|
- Extends HDMI signals over distances up to 60m at 4k@ 60Hz 4:4:4 resolutions.
- HDMI 2.0, HDCP 2.2 HDCP 1.4 and DVI 1.0 compliant
- Supports 18Gbps bandwidth
- Supports one HDMI loop output
- Supports one-way IR pass-through
- Supports HDR function
|
|
Designed to extend HDMI signals over distances up to 60m across economical UTP cabling. |
|
A3242A |
|
- Transmit up to 70m under 4K@60Hz YUV4:4:4
- 1x HDMI loop out on transmitter
- Supports EDID management
- Supports wide band IR Pass through
- HDMI audio sampling rate up to 192KHz, max LPCM 7.1 channel
- Supports S/PDIF and PCM2.0 analog audio extraction
- Supports Dolby True HD, PCM and DTS-HD master audio
- Micro USB port to upgrade new firmware
- POC “Power Over Cable”. Only one power supply required per system
- Power from either Transmitter or Receiver end
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
|
A3242B NEW
|
|
- HDMI 2.0b and HDCP 2.2 compliant
- Supports 18Gbps video bandwidth
- Supports video resolution up to 4K/2K@60Hz RGB/YCBCR 4:4:4
- The transmission distance can be extended up to 70m via a single CAT6/6a cable
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG
- Support bi-directional IR control signal pass-through
- Audio formats: LPCM 7.1, Dolby True HD, DTS HD Master
- EDID copy pass-through function between the source device and display device
- Support ARC and audio de-embedding, audio is output through the optical fibre port of the receiver
- Support bi-directional POC (Power over Cable) function
- Compact design for easy and flexible installation
|
|
This HDMI & One Way Infra-Red Cat6 Extender UTP Balun is designed to extend HDMI signals over distances up to 70m across economical UTP cabling. |
|
A3244B |
|
- HDBaseT single UTP
- Simultaneous HDMI, IR & RS-232 signal transmission
- HDCP compliant
- HDMI ARC and local audio extraction
- Transmitter or receiver unit can be powered via PoC
- Bi-directional IR transmission
- Supports 4K @ 60Hz 4:4:4 (70m max) when used with Cat6A/7
- Supports PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD.
|
|
This HDBaseT UTP balun allows transmission of 4K HDMI signals up to 70m with full audio-return-channel (ARC) support and RS-232 control signals. |
|
A3245 NEW
|
|
- Extend both HDMI signal plus USB peripherals.
- Transmission up to 70m over Cat6/6a UTP cabling.
- Ideal for remote operation of PC equipment.
- HDMI 2.0b, HDCP 2.2 compliant.
- 18Gbps video bandwidth.
- EDID management.
- Includes transmitter & receiver.
- Supports USB 1.1 KVM pass-through.
|
|
This product is designed to extend HDMI signals over distances up to 70m using Cat6/6a cabling. In addition it also allows USB peripherals to control a connected computer from the receiver end. |
|
A3247 NEW
|
|
- Supports four 4K @ 60Hz sources.
- Combines up to four sources onto one display.
- RS-232 controllable via third party software.
- Audio extraction via S/PDIF & stereo RCA.
- HDMI 2.0b, HDCP 2.2/1.x compliant.
- 18Gbps video bandwidth.
- Up to 8 display modes.
- Seamless display switching.
- EDID management.
- Includes IR remote.
|
|
This product is designed for the purpose of connecting four 4K @ 60Hz UHD HDMI sources, and displaying each on a single display |
|
A3443B |
|
- HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
- HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
- Four 18G HDMI 2.0 video outputs support up to 4K60 444 resolution
- Four outputs can be individually scaled for 4K - 1080p
- De-embedded audio to analog L/R and Coaxial ports output
- ARC audio return to the coaxial ports output only
- Built-in Web GUI for TCP/IP control
- Advanced EDID management supported
- Four methods of control: Front panel, RS-232, IR remote and TCP/IP
- Compact design for easy and flexible installation
|
|
This 4x4 HDMI 2.0 18Gbps Matrix Switcher can switch any of these 4 HDMI 2.0 Sources to four HDMI 2.0 Displays. |
|
A3456 |
|
|
|
This spare dongle suits A 3455 which is a wireless presentation kit which allows users to share content from their laptops or mobile devices on a large meeting room screen in a very simple way- without cables and additional configuration, just by clicking the button of the USB-button connected to a laptop,or using the app for iPhone or Android. |
|
A3502A |
|
- Integrates stereo composite signals from devices
- Convert a standard stereo composite signal into an integrated HDMI 1080p video and digital audio signal
- 3.5mm stereo audio and digital coaxial outputs provided
- Fitted with HDMI input and output
- Power supply included
|
|
An upscaler box for integrating stereo composite signals from devices such as CCTV cameras, older camcorders and AV equipment. Converts a standard stereo composite signal into an integrated HDMI 1080p video and digital audio signal. 3.5mm stereo audio and digital coaxial outputs provided. |
|
A3503 |
|
|
|
This handy box provides a way to connect older AV devices (such as retro gaming consoles, VCRs & camcorders) to HDMI inputs and upscales the signal to 1080p @ 60Hz. 720p/1080p selectable. USB powered. |